8mm PIN开关的研制

介绍毫米波开关的用途，探讨ＰＩＮ器件的工作机理，推导了ＰＩＮ工关的设计公式，计算设计了具体的开关，对于关进行了温补，加速，绝缘吸收和导电吸收等一系列的技术处理，从而得到了性能优良的适用地工程型号产品的８ｍｍ开关。     

Development of temperature compensated high elongation resistance strain gauges for use up to 250°C

The paper describes the development and evaluation of temperature compensated high elongation resistance strain gauges for use from room temperature to 250°C. These gauges could be temperature-compensated on steels with coefficient of thermal expansion α = 11 ppm/°C. Thermal output within 250°C was about 1 μm/m/°C and maximum standard deviation of 5 gauges was 34 μm/m. Strain limit was > 4% at room temperature and at 250°C. Gauge factors of different strain ranges at R.T. and at 250°C are tabulated. Some applications are stated.     

Activation of action rules in action observation.

Visually perceiving an action may activate corresponding motor programs. This automatic motor activation can occur both for higher level (i.e., the goal of an action) and for lower level (i.e., the specific effector with which it is executed) aspects of an action. The authors used a tool-use action paradigm to experimentally dissociate priming effects for observing the target, the movement, or the target-to-movement mapping of a tool-use action. In 3 experiments, participants took turns in acting, observing the tool-use action of another person in trial n-1, and executing an action in trial n. Trial transitions from n-1 to n were manipulated in 4 conditions with (a) mapping repeated and movement and target changed, (b) target repeated and movement and mapping changed, (c) movement repeated and target and mapping changed, or (d) all components repeated. Results indicate priming effects for repeating the target-to-movement mapping (i.e., the action rule) of a tool-use action and suggest that a rather abstract action schema is activated during action observation. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

变焦距镜头变倍组和补偿组移动导轨的设计

本文通过典型变焦距镜头的实例和图形,详细介绍了机械补偿变焦距镜头几种常用的变倍组和补偿组在变焦过程中往复运动导轨的结构形式,及其各种结构形式的优缺点。并论述了设计各种形式导轨机构应注意的问题。     

长途传输波分复用系统的设计

随着波分复用（WDM）技术的广泛应用，在工程调测和系统的运行过程中出现了由于系统的适应能力较差和灵活性不够而引起系统优化时间过长的问题，给运营商带来了许多不便，同时，WDM已经由一般的长途应用向超长距离传输和城域网方面发展，适应性和灵活性成为WDM系统网络应用的主要要求，本文将介绍WDM系统的关键技术，重点论述WDM网络设计的一些原则，最后提出WDM系统设计的注意事项。     

惯性平台系统误差的自补偿

提高惯性平台使用精度的途径之一是和计算机实时补偿平台误差的系统分量。首先介绍了仪表和平台误差模型，重点讨论如何从３个含有测量误差，安装误差和基准漂移误差的加速度计输出信号中，分离出载体飞行加速沿制导坐标系三轴的分量。对由于惯性基准的漂移而上起的载体姿态角的测量误差也进行了分析。     

高稳定度CPM飞秒激光特性的研究

利用最优化动力学参数的方法,获得了高稳定度的CPM飞秒激光器运转特性。激光器输出平均脉宽43fs,中心波长624nm,平均功率20mW,脉宽不稳定度±3.3％,频率不稳定度小于10~(-6)。     

A process-control and diagnostic tool based on continuous fuzzy Petri nets

The use of Petri nets and fuzzy logic in intelligent process control has caught the attention of many researchers. In this paper, a Continuous Fuzzy Petri Net (CFPN) tool which integrates the three technologies of fuzzy control, Petri nets and real-time expert systems is presented. The CFPN approach can deal with real-time continuous inferencing, for the purpose of process monitoring and diagnostics, at a high level in the presence of uncertainty. This tool has been implemented in the G2 real-time expert-system environment and is currently being used by ESSO Canada.     

一种可用于可调谐环行Ti：Al_2O_3激光器的宽带单向器

本文介绍一种宽带单向器的原理及设计。选用ＴＧＧ作磁旋光介质，旋光石英晶片作补偿片，所设计的色散补偿型宽带单向器预计可在７００～１０００ｎｍ波长范围内实现环行激光腔中的单向行波运行；将其应用在可调谐环行Ｔｉ：Ａｌ２Ｏ３激光器中，获得了良好的实验结果。     

接地电阻对地电场观测的影响及克服方法

论述了测量电极的接地电阻对振幅和相位测量精度的影响规律，提出了克服接地电阻影响，提高野外观测精度的切实可行的方法和技术。