CNTs/Polyester复合材料的微波吸收特性研究

研究了添加不同质量分数CNTs的聚酯基复合材料的电磁波吸收性能,初步分析了CNTs的螺旋结构和手征性质导致8～40GHz波段良好的吸收。其中厚度为1.40mm±0.05mm的CNTs/Polyester复合材料在25GHz有较强的吸收峰。     

不倒翁式偏心防斜钻具的设计

目前所使用的各种钻具主要是靠钻具本身的重力来产生降斜力,在井斜角很小时,降斜力一般很小,在某些区块钻井时不能满足防斜要求。据此,设计了一种不倒翁式偏心防斜钻具。该钻具有1段钻铤,钻铤的两端各有1个偏心稳定器,钻铤外表面有一半圆形的偏心块,在钻铤和偏心块之间有轴承结构。利用不倒翁原理,当井斜超过一定值时,偏心块会在重力作用下自动停留在井眼低边,这样就可以将此处的钻柱顶到井眼的高边上去,从而产生一个很大的降斜力,使井斜得以有效控制。     

油井封堵注水泥一次不留管柱堵水工具

吉林油田开发到中后期,油井出水现象日趋复杂,以往的注水泥堵水技术均不能满足现状的要求。鉴于此,研制出油井封堵注水泥一次不留管柱堵水工具,并形成了水泥堵水新工艺。该工具的核心为封堵注水泥装置,由打压坐封总成、胶塞座丢手总成、注水泥器本体总成和单流定压器总成等4部分组成,具有打压坐封、注水泥、投胶塞和丢手等一次性功能。经过现场6口井的施工,无一口井发生卡井事故,施工有效率100%,成功率100%。     

Modeling of Material Deformation Kinetics in the Prefracture Zone

Based on the concept of complete stress–strain diagrams, we propose a new model describing the law of stress distribution in the prefracture zone in plastic materials in view of the type of the stressed state.     

Synthesis and luminescence of Sr2CeO4 fine particles

Fine particles of a blue emission phosphor Sr₂CeO₄ have been synthesized using a chemical co-precipitation technique, and the textual and luminescent properties were compared with the one synthesized by the conventional solid-state reaction method. Particle size and distribution of the Sr₂CeO₄ fine powder prepared by the co-precipitation process were smaller and narrower than those obtained by the samples prepared from the conventional one. The emission intensity of the fine particles was equal to that of the larger particles prepared from the solid-state reaction, on the contrary to the general tendency that emission intensity decrease with particle size reduction. Although no Ce³⁺ peaks were observed in EPR measurements, X-ray photoelectron spectra of the samples clearly elucidated the existence of Ce³⁺ only on the surface of Sr₂CeO₄.     

Failure analysis of a broken tooth

Several days after heart surgery, a patient discovered his upper right canine tooth had broken at the root. Such tooth damage, recognized post-operatively, is usually assumed to be caused by blunt mechanical force from an instrument used by the anesthesiologist during placement of a breathing tube at the start of surgery. In this case, the patient had saved the crown portion of the broken tooth, and it was possible to examine the root fracture characteristics. The curvature and direction of the crack path and natural tooth situation suggested that failure could be described through a cantilever beam model. This was confirmed when a whole extracted sample tooth was embedded and broken by a measured force in a manner consistent with the model. The resulting fracture surface matched that of the patient’s broken canine tooth. However, the high load and force direction necessary to fracture the root was inconsistent with forces applied during the anesthesia procedure. The failure analysis and further investigation indicated tooth clenching on the breathing tube during recovery was the likely cause of fracture. This paper presents an alternate explanation for intubation-related dental injury, demonstrates the practicality of fractographic analysis of biological materials, and introduces a methodology for simulating in vitro tooth settings for mechanical testing.     

The magnetic structure of TbNiSiD1.78

TbNiSiD_1.78 has been studied by powder neutron diffraction below 100 K. The compound takes the hexagonal room temperature structure at 100 and 50 K (P6₃/mmc). At 2 K, below the antiferromagnetic ordering temperature of 10 K, there is a small orthorhombic distortion of the lattice. The refined unit-cell dimensions at 2 K (space group Pnma) are a=7.9505(2), b=4.02502(14), c=6.9823(2) Å. The magnetic moments of Tb are 8.71(6) μ_B, and are ordered antiferromagnetically along a.     

欧洲轿车新战略决策——电压、阻燃材料与工作温度一并提高——兼论Synolite5001-T-1牌聚酯树脂的阻燃防火性能优于酚醛树脂

本文介绍了欧洲轿车新战略决策，也即：将要提高轿车的电池电压，，阻燃材料的比率和工作温度；Synolite5001-T-1牌聚酯树脂的阻燃防炎性能优于酚醛树脂。     

金属/Al2O3基纳米复合材料研究最新进展

金属／Al2O3纳米复合材料在保持原有金属的功能特性时，还可以获得 很好的力学性能，是有良好发展前景的一种纳米复合材料。本文回顾了近年来金属／Al2O3基纳米复合材料在制备工艺，微观结构和力学性能，增韧强化机理方面的最新进展，并指出了今后的研究方向。     

Oleuropein Inhibits LDL Oxidation Induced by Cooking Oil Frying By-products and Platelet Aggregation Induced by Platelet-Activating Factor

Oleuropein, a polyphenolic glucoside, constituent of olive fruit and oil, has been previously shown to exhibit, in vitro, potent properties as a biological antioxidant. In the present paper, two new properties are demonstrated in vitro as well, concerning its vascular protection activity, against the atheromatic lesion formation and its blood antithrombotic effect. Firstly, it was found that the oxidation of low-density lipoproteins (LDL), induced by different quantities of total polar materials (TPM), was inhibited by 10 μ M (final concentration) of oleuropein, revealing approx. 50% protection. Secondly, platelet-rich human plasma aggregation, induced by either the platelet-activating factor or adenosine diphospate or arachidonic acid, was inhibited by oleuropein. The 10 μ M (final concentration) of oleuropein was proven to be the most effective among the tested concentrations against LDL oxidation, while an IC₅₀=0.41 mM was calculated for its inhibitory activity against platelet aggregation induced by 0.7 μ M platelet-activating factor.