火星探测器转移轨道的自主导航方法

本文针对转移轨道火星探测器对自主导航的迫切需求,提出了一种基于小行星和X射线脉冲星交互观测的自主导航方法,并结合工程任务对上述量测信息的获取方式和获取条件进行了研究,仿真结果表明,与单独基于小行星或单独基于X射线脉冲星观测的自主导航系统相比,该方法不仅可获得更高的导航精度,为转移轨道中途修正提供准确的轨道信息,且工程实现简单,是一种可行的转移轨道火星探测器自主导航方案,可为我国火星探测器自主导航系统的设计提供参考.     

基于交流比例积分控制器的单相逆变器

提出一种电感电流、输出电压瞬时值反馈控制和负载电流前馈控制相结合的复合控制策略。在此基础上,研制了一台800W的单相逆变器。实验结果表明,提出的控制策略改善了逆变器输出电压的波形,提高了系统的暂态特性。     

A low power and small area all digital delay-locked loop based on ring oscillator architecture

A 133-500 MHz,5.2 mW @500 MHz,0.021 mm2 all digital delay-locked loop(ADDLL)is presented.The power and area reduction of the proposed ADDLL are achieved by implementing a high frequency ring oscillator(ROSC)to count the reference clocks such that the one-clock cycle delay chain and the phase detector in a conventional Master block are no longer needed.The proposed ADDLL has better immunity to PVT(process,voltage,and temperature)than most conventional DLLs,which do not update the control word signals after the locking process,since the control signals for slave delay line are updated in every 256 reference cycles.Fabricated in 0.13 um CMOS process,the measured RMS jitter is 10.83 ps at 500 MHz while the RMS jitter of the input signal is 9.97 ps.     

换位导线生产线电气控制系统

通过对换位导线生产线的研究,提出了采用数字轴和电子齿轮控制的换位导线生产线方案,给出了系统的软硬件设计,构成了分电机驱动的换位导线生产线及其控制系统。     

数字磁通门传感器的自动相位对准

三轴数字磁通门传感器信号处理电路的延时(相位延迟)及各轴延时不一致,影响数字滤波器的输出性能。提出了基于加权最小二乘法的互功率谱相位法计算延时的方法,针对该数字滤波器的特性,选择传感器的不同谐波信号对比分析相位延迟计算的精度,并设计了传感器的自动相位对准方法。实验结果表明:该计算方法精确有效,自动相位对准使滤波器输出性能提高25.89%。     

P2P网络中的超级节点选取算法研究

P2P系统在构建覆盖网络时未考虑到与物理网络的结合,导致逻辑拓扑结构与物理拓扑结构严重不匹配问题,增加P2P相邻节点间的延迟。本文提出一种基于区域划分的超级节点选取机制,将P2P网络中的节点按照物理位置划分成若干区域,保证区域内节点在物理位置上是相近的。利用MATLAB进行仿真实验,仿真实验表明使用这种机制能降低半分布式P2P网络的信息检索延迟,有效地提高检索的效率,并且具有较好的可扩展性。     

Effect of alloying on stability of grain boundary in γ phase of the U–Mo and U–Nb systems

U–Mo and U–Nb alloys are both extensively used in nuclear industry. γ phase in U–Mo or U–Nb alloy is a solid solution, being metastable in low temperature region. In this work, the effect of alloying on stability of grain boundary in meta-stable γ phase in U–Mo and U–Nb alloys are investigate through first-principles calculations. At first, crystal structure and elastic constants of Mo, Nb and γ-U metals are calculated and the obtain results show the mechanical unstable nature of γ phase at 0 K, no matter with GGA or GGA + U treatment, which agrees with most of the theoretical results in the literature. Furthermore, from the calculated symmetric tilt grain boundary (STGB) formation energies of Σ3[110]/(111) and Σ5[001]/(310) in Mo, Nb, and γ-U, it is found that due to the mechanical unstable character of the γ-U phase, negative GB formation energy is predicted at 0 K for Σ5[001]/(310) if the STGB model is relaxed with all degrees of freedom. Therefore, by using special quasirandom structure (SQS) method, Σ5[001]/(310) and Σ3[110]/(111) STGBs with different solute concentrations in U-rich side in U–Mo and U–Nb systems are further investigated. It is found that, when alloying with Mo or Nb, unlike Σ3[110]/(111), although the fixed-atom constraint is applied, the GB formation energy of Σ5[001]/(310) STGB is becoming negative when the solute concentration is in U-rich side. Only when the concentration of Mo or Nb is larger than 27 at.% or 30 at.%, respectively, or sufficient small, the GB formation energy is becoming positive, suggesting a cooperative effects of solute concentration, unstable character, and grain size on GB structures in γ phase. The predicted different stability of alloyed GB structures at 0 K suggest that although γ phase is metastable at low temperature, its metastability can be controlled through alloying with different solutes, or with different GBs. And grain refinement should be relatively easy in U-rich part than U-poor part of the U–Mo and U–Nb systems.     

Low‐voltage and high‐transmittance blue‐phase liquid‐crystal device with slanted electrodes

Abstract— A low‐voltage (～10 V_rms) and high‐transmittance (～90%) polymer‐stabilized blue‐phase liquid‐crystal (BPLC) device with a slanted‐electrodes structure is proposed. Unlike the vertical‐field‐switching (VFS) mode in which oblique incident light and a vertical field are employed, the proposed device utilizes normal incident light and an oblique field. The slanted electrodes generate a strong and uniform oblique electric field, which contributes in obtaining low voltage and high transmittance. Moreover, no couple films or prism sheets are needed, which helps to enhance the optical efficiency and simplify of the device structure. This device has great potential application for emerging BPLC displays and photonic devices.     

Blind estimation of the PN sequence in lower SNR DS-SS signals with residual carrier

This paper presents a method of singular value decomposition (SVD) plus digital phase lock loop (DPLL) to solve the difficult problem of blind pseudo-noise (PN) sequence estimation in low signal to noise ratios (SNR) direct sequence spread spectrum (DS-SS, DS) signals with residual carrier. Of course, the method needs to know the parameters of DS signal, such as the period and code rate of PN sequence. Firstly, the received signal is sampled and divided into non-overlapping signal vectors according to a temporal window, whose duration is two periods of PN sequence. Then, an autocorrelation matrix is computed and accumulated by the signal vectors one by one. The PN sequence with residual carrier can be estimated by the principal eigenvector of this autocorrelation matrix. Furthermore, a DPLL is used to deal with the estimated PN sequence with residual carrier, it estimates and tracks the residual carrier, removes the residual carrier in the end. Theory analysis and computer simulation results show that this method can effectively realize the PN sequence estimation from the input DS signals with residual carrier in lower SNR.     

Optimal Performance in Tracking Stochastic Signal Under Disturbance Rejection

The analysis method of optimal tracking performance is proposed for multiple‐input multiple‐output (MIMO) linear time‐invariant (LTI) systems under disturbance rejection. An H₂ criterion of the error signal between the output of the plant and the reference signal is used as a measure for the tracking performance. Spectral factorization is applied to obtain the optimal solution of the system tracking error. The explicit expressions are derived for this minimal tracking error with respect to random reference signals under disturbance rejection. It is shown that the nonminimum phase zeros, the zero direction, the unstable poles, the pole direction of a given plant, statistical characteristics of the reference input signal, and disturbance signal have a negative effect on a feedback system's ability to reduce the system error with disturbance rejection. The results show that the optimal tracking performance will further be damaged because of disturbance rejection. Some typical examples are given to illustrate the theoretical results.