Silver Electrodeposition from Photographic Processing Solutions

This paper describes the parameters that are important in the industrial practice of silver removal from photographic fixers. The experiments were performed under potentiostatic control using synthetic solutions. The current efficiency was analysed as a function of the cathodic potential taking into account the deposit quality. A cathodic potential of ?0.5 V against a saturated calomel electrode is recommended. The conditions to prevent the darkening of the electrodeposit were investigated. The determination of silver concentration in the solution was made by direct potentiometry. The results obtained with synthetic fixers were corroborated by making the silver deposition from commercial fixers in an electrochemical reactor with rotating cylinder electrode intercalated in an electrolytic flow circuit in order to simulate practical conditions.     

Experimental evaluation of the strength distribution of E-glass fibres at high strain rates

A bimodal Weibull distribution function was applied to analyse the strength distribution of glass fibre bundles under tensile impact. The simulation was performed using a one-dimensional damage constitutive model. The results show that there were two concurrent flaw populations in the fracture process. The regression analysis using the bimodal Weibull distribution function was in good agreement with experiment.     

提高K-9曲拐质量的热处理工艺

K-9曲拐质量不合格主要是由于热处理后，珠光体数量太少所引起。因此应用正交试验，合理地选择了热处理工艺参数，提高了出炉温度，增加了珠光体数量，解决了K-9曲拐的质量问题。     

淀粉液化液灭酶方法的研究

某些情况下淀粉液化液需要严格控制液化的程度 ,因此需要及时终止残余淀粉酶的活性。实验用降低液化液 pH值、升高温度、以及两者并用等 3种方法结束液化反应过程 ,实验结果可作为工业生产过程参考。     

Do changes in cognitive factors influence outcome following multidisciplinary treatment for chronic pain? A cross-lagged panel analysis.

Changes in maladaptive cognitions may constitute therapeutic processes of multidisciplinary pain programs. A cross-lagged panel design was used to determine whether (a) early-treatment cognitive change predicted late-treatment outcome index change, but not vice versa; and (b) these effects remained significant with depression change controlled. Ninety chronic pain patients, in a 4-week multidisciplinary program, completed measures of catastrophizing, pain helplessness, depression, pain, interference, and activity level at pre-, mid-, and posttreatment. With depression changes controlled, early-treatment catastrophizing and pain helplessness changes predicted late-treatment outcome index changes, but not vice versa; early-treatment depression changes predicted late-treatment activity changes, but not vice versa. Findings advance understanding of pain treatment process and suggest that negative cognition changes may indeed affect improvements in treatment outcome. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

四方连续式面料图案的自动生成算法

提出了自动合成四方连续面料图案的数学模型;介绍了人机交互色彩调配算法;从数学模型、色彩处理、应用前景库三方面对有关设计思想和实现方法作了详细说明.     

VCM生产过程中汞污染的防治

介绍了引进VCM生产技术中，有关含汞污水的处理方法及在生产工艺上所采取的减少汞污染的措施，解决了催化剂的汞污染问题。     

城市污水处理厂的施工监理

指出施工监理是一项细致而又责任重大的工作。把握好污水处理厂关键工序的施工及检查,才能对污水处理工程进行有效地控制和管理,使之发挥最大的经济和社会效益。     

An integrated system of biological and catalytic oxidation for the removal of o-xylene from exhaust

Biofiltration is an efficient technology for treatment of gaseous waste. Its disadvantages, however, include large volume of bioreactor and slow adaptation to fluctuating concentrations in waste gas. Catalytic oxidation offers a high destructive efficiency at relatively low operating temperature and small unit. A bench scale system integrated with a biofilter and a catalytic oxidation unit for the treatment of gases containing o-xylene was investigated in this study. The catalytic oxidation unit was packed with Cu/Al₂O₃ catalyst. The results showed that 90% of o-xylene could be removed in the biofilter at the load below 38.2 g m⁻³ h⁻¹. High o-xylene concentration in inlet gas resulted in an overload of the biofilter. Using the Cu/Al₂O₃ catalytic oxidation unit, the concentration of o-xylene could be reduced evidently. The combination of the chemical and microbial processes not only led to a high and stable efficiency of o-xylene conversion, but also improved capacity resisting the shock loads. The Cu/Al₂O₃ was studied for o-xylene oxidation in temperature range of 90–320 °C. The o-xylene conversion was improved correspondingly with the increasing of oxidation temperature. The reaction mechanism of o-xylene oxidation on Cu/Al₂O₃ was also investigated using diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS).