Low Temperature Elastic Constants of Polycrystalline MgB2

We have used a resonant ultrasound spectroscopy technique to measure the bulk and shear modulus of fully dense, polycrystalline MgB₂ between 4 and 300 K. Both moduli show good agreement with published first principle calculations. The internal friction shows a broad maximum around 40 K.     

液态挤压在铝合金减震筒上的应用：液态挤压比压值对制件性能影响的分析

指出了压力铸造及热挤压工艺生产铝合金减震筒的缺点，阐述了液态挤压的特征，介绍了液态挤压在减震筒上的应用，分析了比压值对制件性能的影响。     

Thermal Shock Behavior of Porous Silicon Carbide Ceramics

Using the water-quenching technique, the thermal shock behavior of porous silicon carbide (SiC) ceramics was evaluated as a function of quenching temperature, quenching cycles, and specimen thickness. It is shown that the residual strength of the quenched specimens decreases gradually with increases in the quenching temperature and specimen thickness. Moreover, it was found that the fracture strength of the quenched specimens was not affected by the increase of quenching cycles. This suggests a potential advantage of porous SiC ceramics for cyclic thermal-shock applications.     

用超声处理在石墨表面形成梯度孔洞

研究了超声处理对石墨表面状况的影响。超声处理初期，增加超声处理时间使石墨显气孔率增加，表面孔洞数量增多，尺寸变大；超声处理5min后，超声处理时间增加，显气孔率和孔洞状态基本不变。用超声处理能在石墨表面内层附近形成比较理想的梯度分布孔洞。     

UL简介与CCL认可

本文从六个方面对UL的基本知识作了一个简要的概述及CCL认可过程的介绍,希望能为业界同仁提供一个参考方向。     

纳米镓/聚甲基丙烯酸甲酯复合材料的原位超声合成与表征

超声作用于低熔点金属镓,使其超细化为纳米级的镓粒子,并采用无引发剂的乳液聚合方法制备出GA/聚甲基丙烯酸甲酯(PMMA)纳米复合粒子,并分析了其微观结构。结果表明纳米镓的形态和结构因有无表面改性剂而不同;乳液聚合得到的纳米镓复合粒子是核壳结构型,粒子大小为50~80 NM,内核金属镓粒径为30~50 NM,与聚合物存在一定的化学作用。     

应变式压力传感器特性补偿和应用

讨论了用动态补偿数字滤器对应变压力传感器的动态特性进行补偿，使之提高测量精度并能用于爆炸冲击波测量的一种方法。实验结果与经验值比较，补偿前．后对比、测量精度有明显提高，说明在一定条件在变式测压系统也可用于爆压的测试。     

半导体元件清洗技术浅谈

随着社会的进步和科学技术的迅猛发展,对洗净技术的要求也越来越高。清洗方式多种多样,但最主要的是突出在喷射清洗和超声波清洗两大方面,应用于全国各行各业,并且也得到了明显进步。     

Application of ultrasonic waves in activation of microcrystalline cellulose

In this work, microcrystalline cellulose (MCC) was activated with ultrasonic waves. The influences of ultrasonic treatment on the changes of supramolecular structures and morphology structure were studied by WAXS and SEM. The accessibility of the MCC was characterized by water retention value (WRV) and specific surficial area. The influence of ultrasonic treatment on the reactivity of MCC was investigated through the reaction of MCC being oxidized into 2,3‐diadehyde cellulose (DAC) by periodate sodium. The mechanism of the reactivity change of ultrasonically treated MCC was examined. The results showed that the degree of crystallinity of MCC decreased and the degree of polymerization showed little change after treatment with ultrasonic waves. The morphologial variation of the treated MCC was significant when compared with the untreated MCC, which contribute to the improvement of accessibility. The aldehyde content of DAC prepared from ultrasonically treated MCC was improved from 64.19 to 85.00%, indicating that the regioselective oxidation reactivity of MCC was significantly improved. The aldehyde content was found to first increase with time of ultrasonic treatment to a point, and then decrease as time progressed. In addition, the aldehyde content was found to increase with an increase in ultrasonic power. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

含有复合阻尼结构的压力波制冷机振荡管内流动分析

通过对含有复合阻尼结构的压力波制冷机振荡管内的流场分析，详细讨论了激波在接受管内的行为，数值计算同时表明：含有两道复合阻尼结构加上激波吸收腔完全可以将激波降低到工程上可以接受的程度。