新型水力泵排液工艺

酸化或压裂是改造油气层措施中常规的也是最有效的方法之一。问题是酸化或压裂结束后,采取何种工艺及时返排出残酸,减少残液二次沉淀对油层的污染。同时常规TCP(油管传输负压射孔)+DST(地层测试器)二联作测试工艺在遇到低压、低渗等非自喷油层时,要想取准油层产能、压力,收集到有代表性产液样品资料,困难很大。针对以上问题,大港油田钻采院研制了新型水力喷射泵,该泵可与酸化、压裂及射孔+测试等工艺配套使用,在实现一趟施工管柱同时完成几项工作的同时,利用喷射泵深抽、连续强排的技术特点,取得了较好效果。     

浅谈水闸安全检测

通过对华东沿海地区80年代以前修建的一些在役水闸工程的系统安全检测和分析,发现了水闸工程存在的安全隐患,同时也了解水闸工程尚有的潜在能力。提醒水闸管理部门,在役水闸满足目前社会发展需要的同时,还必须高度重视水闸的安全生产运行和管理。水闸安全检测就是利用先进的检测手段,为业主及时、高效、经济和高质量地解决水闸工程存在的实际问题。     

基于LabWindows/CVI的某型飞机FBW飞行试验台设计与实现

主要阐述了某型飞机EBW飞行试验台的LabWindows／CVI实现。在分析EBW组成及信号交联关系的基础上，设计了PCI总线结构的系统硬件；提出了测试库与测试引擎相结合的编程方法，并着重阐述了测试引擎的实现方法。     

W‐band physical layer design issues in the context of the DAVID–DCE experiment

This paper aims at focusing on the aspects concerning the physical layer design for an innovative satellite communication experiment. Such an experiment, denoted by the acronym DAVID–DCE (Data and Video Interactive Distribution—Data Collection Experiment) is based on the exploitation of the W‐band (75–110 GHz) for high‐bit‐rate satellite transmission. The potential advantages of using of the W‐band are mainly related to the great bandwidth availability, and to the absence of interference. Moreover, an expected result of the experiment is a substantive improvement in the communication system's performances in the presence of meteorological phenomena (e.g. rain) as compared with the more conventional Ka‐band satellite transmission. On the other hand, problems to be faced concern the non‐ideal behaviours of hardware devices employed for high‐frequency digital transmission. In particular, carrier recovery and timing recovery are the most crucial signal‐processing tasks to be carefully considered in the design of the physical level of the system, because they considerably suffer from hardware impairments. The purpose of this work is to illustrate the proposed solutions in terms of the most critical modulation, demodulation and synchronization design issues, together with the effects of non‐ideal behaviours of hardware components on BER performances. Copyright © 2004 John Wiley & Sons, Ltd.     

银铜复合电触点复合强度检测方法的讨论

贵金属及其合金铆钉型复合电触点除了应考核其冷态复合强度之外，还必须增加在热态下复合强度的考核，只有这样才能满足用户在产际运行时对复合触点复合强度的要求。     

移动探针测试技术的运用及测试结果剖析

主要讨论印刷电路板(PCB)移动探针测试中软件及检测中遇到特殊情况的处理,并对造成通短路现象的原因进行了分析,以达到保证PCB产品质量的目的。     

Early detection of ageing in solder joints through laser probe thermal analysis of the peltier effect

We have recently developed an optical contactless method for testing the quality of solder joints during accelerated thermal cycling ageing processes.¹ The method was based upon the measurement of the dynamic thermal behaviour of the joint to short bursts of Joule heating. It has proved to be efficient in revealing the formation of cracks at the lead-solder interface. We present a method to evaluate ageing at a much earlier stage in the cycling process. We have observed in earlier work,¹ that before cracks appear, structural changes occur in the solder at the lead-solder interface. The thermal response of the solder joint is recorded over time to a Peltier heat perturbation produced by flowing a current pulse through the interface where structural changes occur. The key point in this method is to discriminate the Peltier effect from the Joule thermal response because both effects generate heat. The variation of the early Peltier response in the thermal cycling ageing tests is seen as a quantitative signature of the structural changes in the lead-solder interface.     

Novel miniature integrated optical goniometers

A new principle and arrangement for directly determining the angle of incidence of an optical beam on an object are proposed and demonstrated. The novelty of the approach lies in the realization of a ‘smart object’, which extracts a portion of the incident beam's power into an optical waveguide attached to the object's surface or embedded in its body for converting the angle of incidence into the position of a guided beam with finite lateral extent. This ‘integrated optical light pointer’ beam is accomplished by means of creating additional degrees of freedom on the target in two different ways. While a first type is based on introducing spatial variations of the waveguide thickness, a second type makes use of a chirp of the grating periodicity. The feasibility for practical applications has been experimentally demonstrated by a direct comparison with a commercial high-resolution encoder, resulting in an r.m.s. error of <30′'. Measurements have been performed for chips fabricated based on replicated polycarbonate substrates and with no external optics, showing the great potential of this approach for realizing low-cost yet high-performance miniature goniometers.     

Contemporary approaches to certification of measurement provision software

Contemporary approaches to the certification of measurement provision software are considered in domestic and overseas publications. Normative documentation is analyzed and a scheme is proposed for certification that takes account of the features of programs used for metrological purposes. __________ Translated from Izmeritel’naya Tekhnika, No. 5, pp. 65–68, May, 2007.     

振动采油工艺在稠油区的实验研究与应用

在天然地震的影响下,油井产量发生波动,使人们受到启示,从而引进了振动采油工艺技术。本文对振动增产的机理进行了探讨,指出振动增油机理在于加快地层中流体的流速;改变储集层内油、气、水的重新分布;改变岩石表面润湿性,有利于清除油层堵塞,提高渗透率。通过分析两个试验区的振动采油效果,总结出在不同扰动力、不同激振频率、不同振动周期下的增产效果和规律,对振动采油的实施具有一定的指导意义。