变权组合预测模型在大坝安全监测中的应用

简要介绍了组合预测模型的基本原理，该模型改进了单一模型考虑因素的片面性，但常规的组合预测模型的权系数是固定的。考虑到各种模型的预测精度的变化，以及大坝安全监测数据存在的突变、时效等因素，固定权系数的组合预测模型有待进一步改进。文中提出了变权系数组合预测模型，并将其用于实际的大坝安全监测工程。结果表明，变权组合预测模型的预报精度高于其他模型。是一种值得推广的方法。     

Transformations in machining. Part 1. enhancement of wavelet transformation neural network (WT-NN) combination with a preprocessor

Properly selected transformation methods obtain the most significant characteristics of metal cutting data efficiently and simplify the classification. Wavelet Transformation (WT) and Neural Networks (NN) combination was used to classify the experimental cutting force data of milling operations previously. Preprocessing (PreP) of the approximation coefficients of the WT is proposed just before the classification by using the Adaptive Resonance Theory (ART2) type NNs. Genetic Algorithm (GA) was used to estimate the weights of each coefficient of the PreP. The WT-PreP-NN (ART2) combination worked at lower vigilances by creating only a few meaningful categories without any errors. The WT-NN (ART2) combination could obtain the same error rate only if very high vigilances are used and many categories are allowed.     

广西某矿区托帕石的宝石学特征

广西某矿区的脉石矿物——黄玉分三个世代,其中第三世代的黄玉晶体无色透明,重量大于0.9克拉,瑕疵不明显,密度(3.50)、硬度(7.8430)和折射率(1.6330)等特征均达宝石级,经系统研究测试,可以命名为托帕石(Topaz)。     

STM tunneling spectroscopy on high Tc superconductors

STM tunneling spectroscopy has been performed on the bulk single crystals of BiSrCaCuO (BSCCO) and the epitaxial thin films of YBaCuO (YBCO) at cryogenic temperatures. The STM images and tunneling spectra observed on the (001) surfaces can be classified into three cases; 1) Atomic image is visible. However, the tunneling spectrum shows semiconducting or smeared superconducting gap structures, depending on the tip-sample distance. 2) Clear atomic image can not be obtained. But, the tunneling spectrum shows flat bottom region with quite low zero bias conductance. 3) Tunneling spectra demonstrate gapless behavior, independent of the tip-sample separation. These observations support the quasi-2D electronic picture in whichs-wave like 2D superconducting layers are coupled with each other through the Josephson effect.     

Dynamics of Balancing Space and Time in Memory: Tau and Kappa Effects Revisited.

In 3 experiments, the authors studied the organization of spatiotemporal information in memory. Stimuli consisted of configurations of dots, presented sequentially. The stimuli were either proportional, with interdot distances corresponding to interdot durations, or not proportional, with interdol distances not corresponding to interdot durations. After a learning phase, participants reproduced the spatial (Experiment 1), temporal (Experiment 2), or spatial and temporal (Experiment 3) characteristics of the target 60 times in succession. In the nonproportional conditions, effects of variable interdot durations or distances on the reproduction of, respectively, constant distances (tau effect) or durations (kappa effect) were observed, whereas no such effects were observed when variable distances or durations were to be produced. Tau and kappa effects influenced the accuracy but not the variability of responses. The results are discussed in light of the distinction between properties of the stabilized mental image and the process of stabilization. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Material removal and surface damage in EDM of Ti3SiC2 ceramic

Material removal and surface damage of Ti₃SiC₂ ceramic during electrical discharge machining (EDM) were investigated. Melting and decomposition were found to be the main material removal mechanisms during the machining process. Material removal rate was enhanced acceleratively with increasing discharge current, i_e, working voltage, u_i, but increased deceleratively with pulse duration, t_e. Microcracks in the surface and loose grains in the subsurface resulted from thermal shock were confirmed, and the surface damage in Ti₃SiC₂ ceramic led to a degradation of both strength and reliability.     

贵冶动力中心二期反渗透系统改造

本文阐述对贵冶动力车间二期反渗透进行改造的成功实践 ,主要从反渗透系统设计、反渗透系统中容易出现的问题及解决方法等进行介绍。     

Optimization of anodic oxidation and Cu–Cr oxide catalyst preparation on structured aluminum plates processed by electro discharge machining

This paper describes the optimization of three processes applied in fabrication of a microstructured reactor for complete oxidation of volatile organic compounds. The first process involves the optimization of the electro discharge machining (EDM) method to produce a set of microchannels with a high length to diameter ratio of 100, with a standard deviation from the average diameter below 0.2%, and with a surface roughness not higher than 2.0 μm. To satisfy these criteria, fabrication of microchannels must be carried out with two machining passes in the Al51st alloy. Then, the effect of several parameters on the anodization current efficiency with respect to oxide formation was studied. The best process conditions to get a 30 μm porous alumina layer in a 0.4 M oxalic acid electrolyte, were found to be a temperature of 1 °C, an anodic current density of 5 mA/cm², and 23 h oxidation time. At last, the resulting coatings were impregnated with an aqueous solution of copper dichromate followed by drying and calcination at 450 °C to produce active catalysts. The effect of a copper dichromate concentration, number of impregnation cycles (1 or 2), and different after-treatments on catalytic activity and stability in complete oxidation of n-butane were studied. The catalytic activity of the obtained coatings is superior to that of alumina supported pelletized catalysts even at much lower loadings of active metals.     

Optimum thermoeconomic and thermodynamic performance characteristics of an irreversible three-heat-source heat pump

The coefficient of performance and specific heating load of an irreversible three-heat-source heat pump are given by using a general cycle model affected by the finite-rate heat transfer, heat leak and internal irreversibility of the cyclic working fluid. The heat pumping load divided by the total cost per unit time is taken as a new objective function and used to investigate the performance of the heat pump. The thermoeconomic and thermodynamic performance characteristics of the heat pump are discussed in detail. Some important performance parameters such as the thermoeconomic objective function and coefficient of performance are optimized. The optimally operating regions of the heat pump and the bounds of several performance parameters are determined. Finally, it is pointed out that the Carnot heat pump may be taken as a special case of a three-heat-source heat pump and consequently its optimal performance can be directly derived from the results obtained here.     

浅议斜坡稳定性计算中水压力的作用

理论推导证明了静水压力模式与动水压力模式下地下水作用效果的差异,并且结合前人的研究成果,提出要取得合理的稳定性计算结果,两种水压力模式下所选用的强度参数应有所区分,对于静水压力模式,应取快剪或不排水剪指标;对于动水压力模式,则应取用慢剪或排水剪指标。最后采用一个具体的工程实例验证了结论的合理性。