火灾自动报警与PLC自动控制相结合在油库消防系统中的应用

为了加强对油库消防监控,更好地保护油库的消防安全,宁波镇海国家储备油库的消防监控系统尝试了火灾自动报警与PLC自动控制相结合的监控模式,并取得了良好效果,使系统监控的智能化程度大为提高,其报警及灭火控制功能更为先进。文章主要阐述了该系统的特点、结构及功能,并结合实际工程应用介绍了该系统的工作流程,为该技术在其他类似工程的应用提供了有益的借鉴。     

莲花水电站外部变形自动监测系统改造

介绍莲花水电站大坝面板及溢洪道外部变形自动化监测系统设计、测量精度分析及运行情况.     

浮体门设计的探索与实践

水电站泄水道破坏修复工程,是一项风险高、难度大、前景广阔的系统工程。刘家峡水电站泄水道2号孔破坏修复的关键,是采用人工深水软导向浮体闸门封堵孔口,形成门后洞内旱地施工条件;龚嘴水电站10号冲砂底孔破坏修复的关键,增设浮体闸门采用自动潜行式浮体闸门封堵孔口,形成门后洞内旱地施工条件;哈萨克斯坦CHARDARA水电站SYNAS项目泄水底孔修复的关键,采用分次降水安装浮体闸门侧支承的方法,挡住引水发电机组的下游尾水,在泄水道进口检修门和流道出口之间形成门旱地施工。此3项泄水道修复工程在行业内没有先例,难度很大。整体方案具有创新性,并且均已高质量竣工并投入正常运行。     

Theoretical Investigation of Time Suboptimal Control of Industrial Manipulators Along Specified Paths

A method for the time suboptimal control of an industrial manipulator from an initial position and orientation to a final position and orientation as it moves along a specified path is proposed. Nonlinear system equations that describe the manipulator motion are linearized at each time step along the path. A method which gives the control inputs (joint angular velocities) for time suboptimal control of the manipulator is developed. In the formulation, joint angular velocity and acceleration limitations are also taken into consideration. A six degree of freedom elbow type manipulator is used in numerical examples to verify the method developed.     

Evaluation of a proper controller performance for maximum-power point tracking of a stand-alone PV system

In this paper the implementation of a suggested stand-alone PV system, for maximum-power point tracking (MPPT), is carried out. Also, this paper presents a comparative study, through experimental work, between the conventional PI controller and the fuzzy logic controller (FLC) under different atmospheric conditions. The implemented system with both the PI controller and the FLC gives a good maximum-power operation of the PV array, but the tracking capability for different optimum operating points is better and faster for the case of using the FLC compared to the case of using the PI controller.     

分子筛吸附器自动再生系统在DCS中实现

介绍了空分装置的分子筛吸附器再生系统的自动控制原理，选用集散控制(DCS)系统实现控制过程，解决了原仪表控制系统的设计、操作和运行上存在问题。新系统更合理、更安全可靠、操作更方便、直观，同时提高了净化工艺的自动化水平。     

单片机自控系统在NS0631型轨道起重机上的应用

单片机自控系统在大型工程机械中得到了越来越广泛的使用，从而使设备的安全性、可靠性大为提高。文章着重分析了NS0631型轨道起重机中自控系统的结构、使用中存在的问题，提出了解决的方法及今后的改进设想。     

道路与匝道中线自动绘制的算法与实现

道路与立交匝道平面中线的计算机自动绘制是道路路线CAD软件的核心功能之一,在道路工程计算机动态交互式设计、计算机辅助成图方面具有基础性作用.依据道路中线线形的曲率变化特点,推导了道路中线坐标计算的通用数学模型,并根据一个工程实例在通用图形系统AutoCAD环境下实现了道路与匝道中线的自动绘制.     

Individual differences in self-assessed health: An information-processing investigation of health and illness cognition.

In 2 studies, the relation between measures of self-assessed health (SAH) and automatic processing of health-relevant information was investigated. In Study 1, 84 male and 86 female undergraduate students completed a modified Stroop task. Results indicated that participants with poorer SAH showed enhanced interference effects for illness versus non-illness words. In Study 2, 27 male and 30 female undergraduate students completed a self-referent encoding task. Results offered a conceptual replication and extension of Study 1 by confirming the specificity of the relation between SAH measures and automatic processing of health (vs negative or positive general trait) information. These studies provide evidence that individual differences in SAH are reflected in schematic processing of health-relevant information. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Robust图像跟踪：强度—特征混合式目标定位

在像平面上确定目标的位置(由它的瞄准点位置表示)是图像跟踪技术的核心.目前研究的目标是图像定位方法多偏重于单一的工作模式,因而难以适应变化较大的使用环境.本文提出一种旨在综合利用强度相关和特征匹配的混合式目标图像定位方法.假定当前帧图像已经过预处理并完成分割,首先通过一种自适应门限SSDA并辅之以投影排序搜索,尽可能快速地剔除与参考图差别较大的子区;再用一种简便可靠并可具一定记忆能力的特征匹配法,在保留的子区集内,为目标精确定位——宣布瞄准点位置.利用实际序列图像所作实验表明:上述方法较之通常采用的单一工作模式的定位方法,有明显增强的Robust性以及更广的适应性,而增加的计算代价不大.