武钢热轧厂层流冷却系统改造及节能效果

针对武钢热轧厂层流冷却系统能耗高，水压不稳，系统反应慢，供水泵工作效率低等缺陷，进行系统改造。提高了系统的控制精度和产品质量，节能降耗取得了明显的效果。     

佛山市中心组团桥梁群对河道影响的数值分析

在不同频率流量和阻水程度条件下,采用一维明渠非恒定流网河数学模型,分析规划中的佛山市桥梁群对区间河道洪季行洪、枯季水环境的影响,计算洪季不同频率洪峰流量下规划桥梁群对区间河道行洪洪水位、分流比的影响,枯季时规划桥梁群对区间河道过流量、分流比的影响,结果表明,利用一维网河数学模型计算佛山市中心组团规划桥梁群对区间河道断面平均水位、流量和流速的影响,结果有足够的数值精度,是可信的。     

Motion and structure interpretation of an optical switch

This paper focuses on tracking, reconstruction and motion estimation of a well-defined MEMS optical switch from a microscopic view. For out-of-view reconstruction, a homography capable of transforming feature points and feature lines between a microscopic image and a CAD model of the switch is implemented. The homography between two sequential microscopic images is decomposed and factorized for motion estimation. Optical flow has also been explored to provide rough estimations of rotation centre and angle. The paper also illustrates motion parameter optimization principles to deal with uncertainty inherent in micro world. After non-linear optimization, estimation accuracy for rotation angle and rotation centre can reach 0.06° and pixel level, respectively.     

Salt-water up-coning during extraction of fresh water from a tropical island

Rainwater can collect in a lens-shaped region within the rock of a tropical island, and may be separated from the underlying salt water by a sharp interface. This paper presents a nonlinear theory for determining the shape of this interface. The island is assumed to be saturated with rain, and provision is made for the outflow of rain-water through the sides of the island. The effect of a bore well on the shape of the interface is investigated, and the problem is solved using a spectral method. An integral-equation method is also presented for the case when the island has infinite width.     

Effect of flow on solutions of rod-coil block co-polymers

An elongational flow field is imposed on a solution of block copolymers consisting of semirigid macromolecules with rigid, rodlike sequences of units in combination with random coil (flexible) units. The problem is formulated according to the lattice treatment of Matheson and Flory. In this formulation, the system consists of rigid blocks whose lengths and locations are fixed by the structure within each macromolecule. These blocks are separated by random coiled units. An excess free energy other than the equilibrium Gibbs free energy of the quiescent solution has to be considered due to the flow field that tends to align the rods. This excess free energy is calculated from the potential energy of rods when a steady-state, homogeneous and irrotational flow field is applied to the solution. The effects of composition, polymer-solvent interaction, size of the co-polymer and flow rates are investigated. Depending on the size and number of rods, some of the chains studied exhibit a biphasic region at equilibrium that shifts to lower concentrations with increasing flow. Longer chains with shorter rods that are isotropic at equilibrium, exhibit a biphasic region at finite values of flow. The degree of orientation increases sharply when the system is biphasic. For larger flows, the orientation function is very close to unity which is perfect orientation.     

摩擦焊在钢制实心抽油杆修复中的应用

通过对焊接工艺及焊后热处理工艺优化，采用摩擦焊接技术对报废抽油杆中仍有使用寿命的杆头与杆体进行了拼接，获得了性能达标的抽油杆。从而提高了旧杆的修复率．降低了采油成本。该技术可在抽油杆修复及相关行业进行推广应用。     

植筋施工工艺

以某网球馆改造工程为例 ,就植筋技术的概念及所用材料进行了介绍 ,详细阐述了其施工工艺流程及措施 ,指出植筋技术具有工艺简单、操作方便、造价相对较低等优点     

Study of hot air generator with quasi-uniform temperature using concentrated solar radiation: Influence of the shape parameters

The non-uniformity of the air temperatures and the slow flow rate at the plane collector exit constitute the main cause of the limitations of the solar drying systems. In order to obtain an uniform and a variable flow rate for different uses, a hot air generator using concentrated solar radiation is proposed. To improve the thermal efficiency of the generator, a study of the influence of different shape parameters is realized. The generator is simulated in the laboratory while investigating the flow induced by a circular disc heated uniformly by Joule effect at constant temperature. This disc is placed at the entrance of an open ended vertical cylinder of a larger diameter. Thermal radiation emitted by the hot disc heats the cylinder wall. The heating of the fluid at the cylinder-inlet generates a thermosiphon flow around the one created by the hot disc. The comparison of the velocity and the temperature profiles of the resulting flow permits to determine the influence of the cylinder height, the vertical source-cylinder spacing and the radius ratio, on the resulting flow at the system exit. Thus, a judicious choice of the shape parameters entails an improvement of the flow rate as well as the thermal flux absorbed by the air and a good homogenization of the air temperature at the generator exit.     

A new adaptation of mapping method to study mixing of multiphase flows in mixers with complex geometries

The main objective of the present work is to modify the traditional mapping method for the simulation of distributive mixing of multiphase flows in geometries involving moving parts such as, internal mixers or twin-screw extruders without a limitation on their geometrical periodicity. The periodicity condition, limits the results of traditional mapping method to tracking mapping mesh between specific discrete time intervals or distances for that geometry is repeated, hence, result is only for fixed orientation of rotors. Imaginary domain method is introduced to track mapping mesh from one state to the next free of geometrical periodicity limitations. In this work the method is introduced and its applicability and accuracy is discussed in details. A two-dimensional (2D) simulation of mixing of two Newtonian fluids with different viscosities in an intermeshing internal mixer is used as a test case study. In this example the key issues of ability to predict mixing state in details for all orientations of rotors is presented. To reduce diffusion errors of mapping method in the boundaries of the rotors, mapping mesh refinement technique that relies upon one single reference mesh is also presented.