Application of the blind source separation method to feature extraction of machine sound signals

As the result of vibration emission in air, a machine sound signal carries important information about the working condition of machinery. But in practice, the sound signal is typically received with a very low signal-to-noise ratio. To obtain features of the original sound signal, uncorrelated sound signals must be removed and the wavelet coefficients related to fault condition must be retrieved. In this paper, the blind source separation technique is used to recover the wavelet coefficients of a monitored source from complex observed signals. Since in the proposed blind source separation (BSS) algorithms it is generally assumed that the number of sources is known, the Gerschgorin disk estimator method is introduced to determine the number of sound sources before applying the BSS method. This method can estimate the number of sound sources under non-Gaussian and non-white noise conditions. Then, the partial singular value analysis method is used to select these significant observations for BSS analysis. This method ensures that signals are separated with the smallest distortion. Afterwards, the time-frequency separation algorithm, converted to a suitable BSS algorithm for the separation of a non-stationary signal, is introduced. The transfer channel between observations and sources and the wavelet coefficients of the source signals can be blindly identified via this algorithm. The reconstructed wavelet coefficients can be used for diagnosis. Finally, the separation results obtained from the observed signals recorded in a semi-anechoic chamber demonstrate the effectiveness of the presented methods .     

Efficient prolog programming

This paper presents some basic programming strategies for Prolog programmers. The strategies are based on knowledge about the operational behaviour of the Warren Abstract Machine (WAM). The aim is to provide simple principles for making programs both faster and less space-consuming. The programming hints given are mostly local, i.e. only a single clause or procedure need be considered at a time.     

GaAsP混晶中Fe杂质能级的无序分裂

GaAsP混晶中Fe杂质基态与激发态的光离化截面的幅度比S(x)随组分x有规律地变化,本文提出一种理论估算,认为它是Fe能级无序分裂的结果.     

从萨沃伊别墅探究勒·柯布西耶的机器美学

文章论述了萨沃伊别墅的机器美学思想,主要结合了勒·柯布西耶在1926年提出的"建筑新五点"来探讨他所主张的机器美学在萨沃伊别墅上是如何得以实现。     

Toward in-situ flaw detection in laser powder bed fusion additive manufacturing through layerwise imagery and machine learning

Process monitoring in additive manufacturing may allow components to be certified cheaply and rapidly and opens the possibility of healing defects, if detected. Here, neural networks (NNs) and convolutional neural networks (CNNs) are trained to detect flaws in layerwise images of a build, using labeled XCT data as a ground truth. Multiple images were recorded after each layer before and after recoating with various lighting conditions. Classifying networks were given a single image or multiple images of various lighting conditions for training and testing. CNNs demonstrated significantly better performance than NNs across all tasks. Furthermore, CNNs demonstrated improved generalizability, i.e., the ability to generalize to more diverse data than either the training or validation data sets. Specifically, CNNs trained on high-resolution layerwise images from one build showed minimal loss in performance when applied to data from an independent build, whereas the performance of the NNs degraded significantly. CNN accuracy was also demonstrated to be a function of flaw size, suggesting that smaller flaws may be produced by mechanisms that do not alter the surface morphology of the build plate. CNNs demonstrated accuracies of 93.5 % on large (>200 μm) flaws when testing and training on components from the same build and accuracies of 87.3 % when testing on a previously unseen build. Finally, evidence linking the formation of large lack-of-fusion defects to the presence of process ejecta is presented.     

Semantic analysis in XTRA,an English — Chinese machine translation system

This paper concerns the resolution of lexical ambiguity in a machine translation environment. We describe the integration of principles of selection restrictions. Preference Semantics, and intelligent relaxation of constraints in handling lexical ambiguity. The approach differs from many previous MT systems in that it is more powerful than brute force systems, while more realistic than systems that assume a large degree of coded encyclopedia information for full understanding.     

Teleoperation to robotics at Langley Research Center

A popular conception of the evolution of remote manipulation is a progression from teleoperation to telerobotics and then to robotics. This is logical because in going from teleoperation to robotics there would appear to be a continuous decrease in manned workload, an increase in system complexity, and an increase in the amount of intelligence in the automated system. During the past 10 years NASA Langley Research Center (LaRC) has been involved in all three areas. The decision on which system is most suitable for a task depends not only on the task, but on the allocation of responsibility for intelligence or high level control. The operator may be responsible for all intelligence and control functions, they may be shared between the operator and the automated system, or they may be performed by an autonomous system. This paper discusses some of the experiences in each area in applications related to possible space tasks and some of the lessons learned.     

Evaluation of hydraulic excavator Human–Machine Interface concepts using NASA TLX

This study evaluated newly proposed Human–Machine Interface (HMI) design concepts for improving the ergonomics of hydraulic excavators. The design concepts were based on an augmented interaction technique which involved the use of heads-up display (HUD) and coordinated control as HMI elements. Two alternative HMI designs were elaborated in order to separately evaluate the ergonomic impacts of the head-up display and the coordinated control by comparing them to the standard HMI design. The effectiveness of these three HMI designs in terms of the reduction of the operators' mental and physical workload were assessed by conducting experiments utilizing human subjects, ages 23–35 years. The National Aeronautics and Space Administration's Task Load Index (NASA TLX) method was used for collecting subjective workload scores based on a weighted average of ratings of six factors: Mental Demand, Physical Demand, Temporal Demand, Own Performance, Effort, and Frustration Level. The results showed that the type of HMI design affects different aspects of the operator's workload. Indeed, it showed how the proposed augmented interaction is an effective solution for reducing the ergonomic gaps in terms of mental workload, and to a lesser extent the physical workload, subjected by the standard HMI design.     

基于神经网络和支持向量机的电能质量组合评价

电能质量在当代越来越受到重视.根据电能质量的概述,提炼出电能质量评价指标体系,并基于组合评价的原理,运用BP神经网络和支持向量机对其进行评价,通过检验,证明了评价方法的有效性.     

Artificial intelligence for BIM content management and delivery: Case study of association rule mining for construction detailing

The proliferation of Building Information Modeling (BIM) applications, in tandem with the extensive variation of building products, pose new demands on design and engineering firms to efficiently manage and reuse BIM content (i.e., data-rich parametric model objects and assembly details). Tasks such as classifying BIM objects, indexing them with meta-data (e.g., category), and searching digital libraries to load objects into models still plague practice with inefficient manual workflows. This research aims to improve the productivity of BIM content management and retrieval by developing an AI-backed BIM content recommender system. Using data from a case-study firm, this research extracted content from over 30,000 technical BIM views (e.g., plans, sections, details) in historical projects to build an unsupervised machine-learning prototype with association rule mining. This prototype explicated the strength of relationships among co-occurring BIM objects. Using this prototype as the backbone AI-engine in live BIM sessions, this research developed a context-aware recommender system that dynamically provides BIM users with a set of objects associable with their modeling context (e.g., type of view, existing objects in the model) and human–computer interactions (e.g., objects selected by the user). By mining association data from hundreds of historical projects, this development marks a departure from the existing prototypes that rely on explicit coding, recurring user input, or subjective ratings to recommend BIM content to users. The simulation and experimental implementation of this recommender system yielded high efficacy in predicting content needs and achieved significant savings in the time spent on conventional BIM workflows.