An automated patient monitoring using discrete‐time wireless sensor networks

In recent years, Internet of Things (IoT) devices are used for remote health monitoring. For remotely monitoring a patient, only the health information at different time points are not sufficient; predicted values of biomarkers (for some future time points) are also important. In this article, we propose a powerful statistical model for an efficient dynamic patient monitoring using wireless sensor nodes through Bayesian Learning (BL). We consider the setting where a set of correlated biomarkers are measured from a patient through wireless sensors, but the sensors only report the ordinal outcomes (say, good, fair, high, or very high) to the sink based on some prefixed thresholds. The challenge is to use the ordinal outcomes for monitoring and predicting the health status of the patient under consideration. We propose a linear mixed model where interbiomarker correlations and intrabiomarker dependence are modeled simultaneously. The estimated and the predicted values of the biomarkers are transferred over the internet so that health care providers and the family members of the patient can remotely monitor the patient. Extensive simulation studies are performed to assess practical usefulness of our proposed joint model, and the performance of the proposed joint model is compared to that of some other traditional models used in the literature.     

LTE系统多小区上行联合功控算法

针对传统的小区内开环功率控制算法通常以提升本小区的吞吐量性能为目标，忽略了当前小区用户对邻小区用户同频干扰的问题，为提升边缘用户性能的同时兼顾系统整体性能，提出了一种LTE系统小区间上行联合功率控制（UJPC）算法。该算法采用单基站三扇区为系统模型，以最优化系统吞吐量比例公平函数为目标，首先根据最小信干噪比（SINR）约束值和用户最大发射功率这两个约束条件得到相应的数学优化模型，然后采用连续凸近似的方法求解优化问题得出各个基站所管辖的小区内所有用户的最优发射功率。仿真结果表明，与基准的开环功控方案相比，联合功控方案在保证系统平均频谱利用率的情况下能够较大幅度地提高小区边缘频谱利用率，其最佳性能增益能达到50%。     

NSA-500-1型氩弧焊机VD9不同接法对引弧和稳弧的影响

从一起NSA－500－1型氩弧焊机故障，分析其高压脉冲旁路二极管VD9不同接法对引弧、稳弧及设备安全的影响。     

轧机主传动万向联轴器辊端接头结构探讨

分析了衬板槽平面与叉头十字轴孔轴线的相对位置对辊端接头应力的影响 ,研究了轧辊扁头与衬板之间间隙所产生的冲击和应力集中 ,讨论了辊端接头中部过渡段结构对应力分布和制造质量的影响。提出辊端接头结构设计的优化方案     

地源热泵——辐射地板联供试验

通过地源热泵－辐射地板系统冬夏联供试验，讨论了该系统作为新型环保节能空调方式的可行性及优越性，并对运行中出现的问题进行分析。     

区域防空联合预警体系探测效能分析

将联合预警体系划分为不同的子系统,按照系统集成的方法,分析和计算了区域防空条件下联合预警装备体系的探测效能;结合防空兵部队联合预警系统发展的需求,以定量的形式为联合预警体系的构建提供决策依据。     

浅谈门式刚架轻型钢结构厂房中抗风柱的设置

通过对抗风柱上下端的节点几种形式进行分析比较,提出建议性的节点连续方式。     

Life Calculations for Header – PGV-1000 Steam Generator Connector Weld Joints under NPP Service Conditions

The procedure for calculating the life of header – steam generator connector weld joints is proposed. It allows for running out the material plasticity reserve upon static cyclic elastoplastic loading as well as operating conditions, local stress concentrations, and residual stresses after welding.     

钻杆接头螺纹退刀尺寸对接头寿命的影响

钻杆接头螺纹退刀尺寸是指外螺纹接头的台肩面到螺纹消失前第一个完整螺纹之间的距离。GB9253．1－88规定退刀尺寸应小于或等于12．7mm内螺纹，钻杆接头内螺纹的锤孔尺寸为16±2mm，以保证内、外螺纹啮合良好。经检测发现，从日本NKK公司进口的所有φ127mm钻杆接头外螺纹退刀尺寸都大于12．7mm，镗孔尺寸为16～18mm。而APISpec7K规定钻杆接头内螺纹最小镗孔尺寸为15．9mm。鉴于此，建议对我国的有关标准作相应修改，与API标准保持一致。     

一种新的机器人手臂控制方法

从机器人手臂的关节电机力学出发，本文提出了一种独立于现行机器人关节控制器的离线补偿方法，通过对－２自由度机器人的数值研究，证明该法不仅能有效地克服由于惯性负载，关节间耦合与重力效应给控制系统带来的动态精度问题，而且还可以消除由于控制系统本身的固有特性所决定的系统的跟踪误差。