高温预析出对Al-Zn-Mg系铝合金时效硬化和应力腐蚀的影响

研究了高温固溶后降温处理工艺对中强可使预析出LC52和7039铝合金的组织、时效硬化和应力腐蚀的影响。金相观察发现,高温预析出可优先在晶界处产生,并提高随后时效状态下晶界析出相的不连续分布程度,温度降低到一定程度晶内和晶界产生大量析出。合金拉伸性能和应力腐蚀结果表明,预析出在保持强度和塑性的同时,可提高抗应力腐蚀性能。而预析出温度降低,合金强度呈下降趋势。     

中国石化福建炼油化工有限公司

福建炼油化工有限公司（简称“福建炼化公司”），是中国石化和福建省合资建设的石油加工企业。     

卫生陶瓷贴牌（OEM）加工问题的探讨

前言 近20年来,随着改革开放和国民经济的飞速发展,我国建筑卫生陶瓷行业也得到快速发展,产量连年增长,成为世界上建筑卫生陶瓷的最大生产国和消费国,也是出口大国.2007年全国卫生陶瓷的产量达到15 000万件,占世界产量的40%,出口量达到5 525万件,占产量的40%.     

飞机用钛合金的加工

近年来，对汽车和飞机零件高强度化和轻量化的要求越来越高。因此，这些零件所使用材料中的钛、镍合金等也在不断增加。这种材料一般称为切削加工性差的“难切削材料”。加工此类材料的切削刀具也必须能够适应难切削材料特有的加工条件和加工方法。     

Corrosion Inhibition Mechanism with Spilt Cell Technique of Rare Earth Metal on LC4 Al Alloy

A new method of studying the corrosion inhibition mechanism of rare earth metal(REM) on LC4 Al alloy with the spilt cell technique was studied. The principle and experimental method of the spilt cell technique were analyzed. By measuring the change of net-electric current between the two electrodes caused by the change of the amount of oxygen in the solution and the addition of CeCl₃, the influence of corrosive performance of CeCl₃ on LC4 super-power aluminum alloy in the 0.1 mol·L⁻¹ NaCl solution was investigated. Meanwhile, the conditional changes of pH values, CeCl₃ solution, additire and time of performance were also studied. Finally, the features of electrode surface were revealed by using SEM and X-ray energy-dispersive spectrometry (EDS). By combining these with other electric chemical techniques, such as potential-time curve, polarization curve et al.     

橡胶管总成接头的设计

近几年来，随着我国加工制造业的迅速发展，液压软管总成的使用范围也在不断扩大，除机械工业外，汽车行业、综合设备上的液压软管总成需求量大增。由于国外对总成软管的接头研究制造工作起步早、规模大，其软管的品种、管接头的型式均已形成系列化和国际标准化，所以在结合自身实际经验的基础上借鉴国外先进技术和方法显得尤为重要。