舞钢管线钢的开发与生产

系统介绍了舞钢开发的针状铁素体型X70宽厚板的设计思路、工艺特点和实物水平；采用电炉 炉外精炼 连铸 TMCP工艺生产的X70宽厚板满足西气东输专用技术条件的要求，并批量应用在西气东输主干线工程中。     

首钢“川气出川”工程用17.5mmX70管线钢的试制

介绍了首钢试制17.5mm规格高强度、高韧性X70管线钢的生产工艺（成分设计、炼钢和轧钢工艺）及产品的力学性能。在华油钢管厂完成制管（管径为1016mm）以及相应的检验后，所有性能指标全部达到“川气出川”管道工程的技术规范要求。     

基于BCM3540的高清晰度数字电视机顶盒的硬件设计

介绍一种基于BCM3540的高清晰度数字电视机顶盒的硬件设计方案,该方案采用1块主芯片BCM3540及1块协处理器BCM7411,能够处理MPEG-2高清、标清以及H.264高清、标清信号,可以直接支持PCMCIA接口实现机卡分离,并具有32位PCI总线,可以很方便地进行功能扩展。     

Synthesis and structural characterization of methacrylic acid/octadecyl acrylate‐graft‐poly(methylhydrosiloxane) by hydrosilylation

Methylmethacrylate (MMA) and octadecyl acrylate (OA) were grafted to poly(methylhydrosiloxane) (PMHS) by hydrosilylation, respectively, with hexachloroplatinic acid as catalyst, and the former was further hydrolyzed to prepare methacrylic acid (MAA)‐graft‐PMHS under the alkaline condition. Through orthogonal experiment, main factors affecting the graft reaction between OA and PMHS were discussed and arranged in a decreasing order according to their abilities of the effect on the hydrosilylation of OA with PMHS: catalyst dosage, reaction temperature, reaction time, material ratio, and solvent dosage. It was found that the hydrosilylation of OA with PMHS was easier to that of MMA with PMHS. Under optimal conditions, the grafting ratios of MMA with PMHS and OA with PMHS reached about 90 and 95%, respectively. FTIR and ¹H NMR spectra indicated that the hydrosilylation reactions followed the Markovnikov's rule and played a strong preference toward β‐1,2‐addition. The test of contact angle indicated that surface energy of a system was mainly dependent on the polar groups. The surface energy of OA‐graft‐PMHS (35.07 mN/m) was similar to those of PMHS (35.62 mN/m) and polyoctadecyl acrylate (36.57 mN/m), and lower than that of MAA‐graft‐PMHS (43.50 mN/m). © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Synthesis and characterization of polyaniline films using Fenton reagent

The chemical oxidation of aniline to form polyaniline (PANI) films and powder samples was made using Fenton reagent as an oxidizing agent in aqueous sulfuric acid medium. The PANI films were monitored by using the quartz crystal microbalance and the electronic absorption techniques. The optimum concentration was determined and the results were justified by measuring the UV–vis absorption spectra for the in situ PANI films. The conductivity for the PANI films and powder samples, prepared in different conditions, was measured. Also, the IR spectra, X‐ray and the thermogravimetric analysis for the PANI powder formed in the bulk were measured and compared with the polymer prepared using ammonium peroxydisulfate. A preliminary investigation to the dielectric properties of the polymer powder was measured and discussed. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Harold H. Kelley (1921-2003).

This obituary reports the death of Harold Harding Kelley, Professor Emeritus of Psychology at University of California (1921-2003). (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

T梁预制中需要注意的问题

为确保在T梁预制时 ,其内、外的质量和安全施工 ,介绍了四个需特别注意的问题。指出在T梁预制时 ,应把质量放在首位 ,进行具体、综合的分析和计算     

西气东输工程用X70热轧板卷屈服强度检测值波动大的探讨

对西气东输工程用X70热轧板卷检验过程中出的屈服强度σ0.5波动大的情况进行了分析，认为拉伸试样弯曲是主要原因。这一问题可通过反复压平试样，确保试样的平直度以及适当提高钢的强度的方法加以解决。     

EXPLO-500T型拖拉机式地震钻机

万程欣,EXPLO-500T型拖拉机式地震钻机．物探装备，2006，16（4）：314-316 EXPLO—500T型拖拉机式地震钻机采用大马力拖拉机底盘、全液压控制，结构紧凑、操作简单、可靠性强、钻井效率高，特别适合林带、丘陵地区施工。     

核磁共振测井在桩1区块底水稠油油藏开发中的应用

针对桩1区块特高含水期底水稠油油藏的开发特点,利用核磁共振测井资料定量评价其孔隙流体流动特性,准确划分产层,直接识别油、水层,准确地评价了区块剩余油分布情况.依此部署了水平井,取得了很好的开发效果.实践证明,核磁共振测井具备常规测井所不具备的某些技术优势,能解决一些特殊的地质问题,有广泛的应用前景.