ZSM-5型沸石催化剂的结焦与失活

本文对ZSM-5型沸石催化剂结焦与失活的关系进行了系统的评述.探讨了ZSM-5沸石的酸度和微孔结构对结焦过程的影响.     

裂解C_5馏分综合利用的对策

探讨了裂解C_5馏分就近集中分离综合利用和分散直接利用,以及建设单独分离双环戊二烯装置发展下游精细化工产品的综合利用策略。     

The determinants of heat-shock element-directed lacZ expression in Saccharomyces cerevisiae.

Heat-shock induction of heat-shock protein genes is due to a specific promoter element (the heat-shock element, HSE). This study used lacZ under HSE control (HSE-lacZ) to characterize HSE activity in Saccharomyces cerevisiae cells of different physiological states and differing genetic backgrounds. In batch fermentations HSE-lacZ induction by heat shock was maximal in exponential growth, and showed marked decline with the approach to stationary phase. Expression in the absence of heat shock was unaffected by growth phase, indicating that the growth-dependent expression of many yeast heat-shock genes uses promoter elements in addition to the HSE. Heat-induced expression was strongly influenced by the temperature at which cultures were grown. While basal, uninduced expression was constant during growth at different temperatures to 30 degrees C, induction by transfer to 39 degrees C was reduced by increases in growth temperature as low as 18-24 degrees C. Maximal HSE-lacZ induction (30- to 50-fold) was in cultures grown at low temperatures (18-24 degrees C), then heat shocked at 39 degrees C. Ethanol was a poor inducer. Mutations having little effect on HSE-lacZ expression included a respiratory petite; ubi4 (which inactivates the poly-ubiquitin gene); also ubc4 and ubc5 (which each inactivate one of the ubiquitin ligases involved in degradation of aberrant protein). pep4-3 increased both basal and induced beta-galactosidase about two-fold, probably because of slower turnover of this enzyme in pep4-3 strains.     

离子液体催化C_5馏分中二烯烃的聚合反应

合成了多种基于1-丁基-3-甲基咪唑阳离子的离子液体,并作为裂解C5馏分中混合二烯烃聚合反应的介质。考察了离子液体种类、反应温度、反应时间和添加Lew is酸对混合二烯烃聚合反应的影响。实验结果表明,以硝酸根为阴离子的离子液体对混合二烯烃的聚合反应具有一定的阻聚作用;以六氟磷酸根为阴离子的离子液体能明显促进混合二烯烃的聚合反应,提高二聚物的含量;添加Lew is酸(质量分数为1%的ZnCl2)的离子液体对混合二烯烃的聚合反应具有更明显的促进作用,其效果仅次于酸性氯铝酸类离子液体,反应温度以30℃以下为宜,温度过高将促使二聚物进一步聚合,形成三聚物乃至多聚物,降低二聚物的含量。     

Coupling of reaction and separation at the microscopic level: esterification processes in a H-ZSM-5 membrane reactor

A catalytically active zeolite membrane has been used to displace equilibrium by selective water permeation during ethanol esterification. Unlike previous works in which water separation was carried out by zeolitic membranes that did not take part in the reaction, the H-ZSM-5 membrane used in this work had sufficient catalytic activity to carry out the esterification of ethanol with acetic acid, and at the same time was selective for water permeation. As a consequence, the reaction and separation functions could be coupled very efficiently, and the conversion obtained at the same feed rate and catalyst loading was greater than in conventional fixed bed reactors, or in reactors where the zeolite membrane was kept separated from the catalyst.     

RELAP5程序与三维时空中子动力学模型的耦合以及改进研究

引入堆芯物理计算的两群三维时空中子动力学模型,对RELAP5程序的点堆中子动力学模型进行了改进,同时设计了可视化界面,可方便地实现人.机交互操作.计算结果与实际应用表明,改进后的RELAP5程序计算功能和精度得到提高,使用更加方便,在核动力装置的仿真方面有很好的应用前景.     

Influence of washing and of heat-treatment conditions on the thermal stability of VPI-5

Thorough washing of a VPI-5 synthesized with n-dipropylamine as template improves greatly its thermal stability while no major change is observed in the template content. A detailed study of the influence of the pretreatment conditions shows that in order to obtain a high thermal stability (up to at least 960 °C) two parameters are of importance. The removal of both the template and the adsorbed water requires either a low heating rate at atmospheric pressure or a low pressure (less than 3 Torr) when the heating rate is 300 ° per hour.     

Electrical and optical properties of MoO3-V2O5 mixed oxide films

Vacuum deposited MoO₃-V₂O₅ films of different molar concentrations have been used for DC electrical conductivity studies at different temperatures. The optical absorption spectra of MoO₃-V₂O₅ films of different molar concentrations have been measured. From these measurements it is found that optical band gap and activation energy vary with molar concentration of MoO₃-V₂O₅ films.     

An infrared spectroscopic study of the mechanism of chloromethane conversion to higher hydrocarbons on HZSM5 catalyst

Investigation of the reaction mechanism of chloromethane on ZSM5 is a new topic. In this work an in situ FTIR technique was employed to study the conversion processes of chloromethane, the active sites on HZSM5, and the desorption state of surface species. The catalytic conversion of chloromethane to higher hydrocarbons was also studied. It is demonstrated that chloromethane can be reversibly adsorbed on acidic sites of HZSM5 at room temperature. At 100°C chloromethane is irreversibly and dissociatively adsorbed on the strong acidic sites of HZSM5, on which surface methoxyl is formed as proved by infrared characteristic C-H stretchings of-CH₃ at 2960 and 2870 cm^–1. Alkoxyls are produced and adsorbed on the catalyst surface as characterized by the infrared absorption bands of -CH₂-groups at 1460 and 2930 cm^–1. At 100°C the adsorbed methoxyl and alkoxyls are the main surface species, and a small amount of aromatics might exist as detected by a characteristic absorption band at 1510 cm^–1. Between 100 and 200°C the adsorbed surface methoxyl and alkoxyls are converted to aromatics, and the occupied OH groups partially appear. At temperature higher than 300°C the adsorbed aromatics are thermally desorbed into the gas phase. Aromatics and alkanes are the main products in catalytic conversion. These results reveal that the formation of aromatics from methoxyl and alkoxyls is easier than the desorption of aromatics from HZSM5 catalyst. An alkoxyl mechanism is proposed for the conversion of chloromethane on HZSM5 based upon the experimental results and the three assumptions: (a) The primary C-C bond is formed from surface methoxyl groups via the methoxyl group polarization and C-H bond weakening, (b) The adsorbed alkoxyls are converted to aromatics via hydrogen transfer and bond rearrangement similar to the conventional carbenium ion mechanism for the aromatization of olefins and alkanes on HZSM5. The hydrogen atoms from the aromatization stimulate the desorption of alkoxyls to alkanes. (c) At temperature higher than 300°C surface reactions and desorption of adsorbed species take place simultaneously, determining the product distribution in the catalytic conversion.