卧螺离心机共直流母线双电机双变频驱动

介绍了卧螺离心机差转速自动控制共直流母线变频调速系统的结构,分析了工作原理和节能效果,介绍了直流母线的两种并接方法。     

Measurement of AC conductivity and dielectric properties of flexible conductive styrene–butadiene rubber‐carbon black composites

Flexible conductive polymer composites were prepared using styrene–butadiene rubber (SBR) as a matrix and conductive carbon black as filler. The filler loading was varied from 10 to 60 phr. The effect of frequency, filler loading, temperature, and applied pressure on the AC conductivity, permittivity, and loss factor of the composites was studied. The AC conductivity of low and high loaded composites was found to be frequency dependent and independent respectively. The permittivity and the loss factor were continuously decreasing with increasing frequency. The increase in filler loading increased the AC conductivity, dielectric constant, and loss factor of the composites. Increase in temperature imposed increase in conductivity and permittivity of the composites. With increasing applied pressure the properties showed exponential increase. The effect of time under a constant compressive stress was studied and dielectric relaxation times were evaluated. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 986–995, 2007     

Dynamic equivalent method of interconnected power systems with consideration of motor loads

The existing equivalent methods usually only deal with static load models and neglect the dynamic characteristics of loads such as induction motors.This paper presents a dynamic equivalent method which considers motor dynamics.At first,the clustering criterion of motor loads is given.The motors with similar dynamic characteristics are classified into one group.Then,reduction of motors in the same group is carried out.Finally,parameters of the equivalent motor are calculated and the equivalent system is thus...     

省级机动车排气检测监管系统应用研究

为解决当前我国省级环保部门对机动车排气检测监管的实际困难,提高机动车排气污染监管能力,介绍了省级机动车排气检测监管信息系统的构建方法,提出了系统的整体技术框架、网络架构和功能模块组成,并阐述了基于Web services的省—市数据交换技术和自定义统计报表技术的实现方法。以广东省为例开发了原型系统,试运行结果初步显示了系统的实际运行能力。该系统方案能有效解决当前省级环保部门机动车监管所面临的实际问题。     

基于PLC的步进电机转速控制方法研究

概述了PLC控制的优点、步进电机的工作原理。提出了一种基于PLC的四相步进电机控制方法,介绍了系统的硬件组成以及相应的I/O分配。软件设计包括脉冲产生和控制、脉冲分配及步数设定三大模块,用软件完成脉冲分配功能,可以减少硬件资源,控制参数改变方便灵活,提高了系统控制的可靠性和灵活性。     

基于PLC的内壁自动喷涂机控制系统设计

设计了一种适合于圆形内表面喷涂的数控喷涂机的控制系统,采用PLC可编程序控制实现了对喷涂电流、电压、涂层温度等工艺参数实时监测和控制。该控制系统具有结构紧凑、运动灵活、占用空间少、工作可靠、节能、装卸料容易等优点,适用于小型圆形工件内壁喷涂生产。     

基于力矩电机的复合材料缠绕机构张力控制系统

介绍了一个复合材料缠绕机构的张力控制系统,该系统研究了一种新的执行机构一力矩电机的工作特性和驱动电路,采用电阻应变式张力传感器结合三辊式结构测定张力,以力矩电机为执行机构,利用单片机实现对张力的PID控制,实验结果表明,该系统在各种缠绕过程中都具有较好的控制效果和鲁棒性。     

单片机控制的开环NC加、减速方法的实现

介绍了指数加、减速法,并采用等幅均匀的离散型,将指数形式离散化处理来实现步进电动机升、降速控制,给出了程序流程图和相关代码.     

矿井通风机西门子无刷同步机电控系统分析

给出了矿井通风机西门子无刷同步电动机电控系统的硬件设备的结构图和基于功率因数cosφ、励磁电流if双闭环统计系统的控制结构图,分析了在恒功率因数控制时励磁电流随负载变化的调节过程;论述了本电控系统的风机准备启动、定子电源合闸、亚同步投励、停车等控制程序和风机运行参数检测、故障报警、故障保护的程序。本系统具有技术性能好、可靠性与可维性高的显著优点。对从事此类技术工作的人员具有参考意义。     

具有逆变器死区补偿的永磁同步电动机滑模控制

为削弱空间矢量脉宽调制死区效应对永磁同步电动机调速控制系统的影响,建立了逆变器的非线性模型和整个控制系统的模型。结合模型参考控制方法和滑模变结构控制方法,提出一种基于电压模型参考的双闭环二阶滑模控制方法,削弱了传统滑模控制固有的抖振现象,不需要测量逆变器参数而能自动补偿其非线性扰动。仿真结果表明,所提控制方法实现了系统全局稳定性控制,鲁棒性强、转速跟踪速度快、无超调量,电流谐波和转矩脉动明显减小。