30～512MHz,100W线性功率放大器极间匹配设计

设计了一种独特的极间匹配网络,使驱动放大器的输出阻抗直接匹配到末级放大器的输入阻抗,而不通过极间50Ω匹配转换。应用这种极间匹配网络,提高了30～512 MHz,100 W功率放大器的线性输出功率和效率,同时简化了匹配网络,减少了匹配元件,缩小了功率放大器的体积。这种极间匹配网络是通过集中L、C匹配网络与宽带同轴传输线变压器相结合实现的。应用ADS软件模拟以及计算集中L、C元件的值和同轴电缆的长度,使设计的极间匹配网络在近十个倍频程的频带内获得最佳性能。     

Study on the HOMs coupler design of spoke cavity

The superconducting spoke cavity has been proposed to accelerate the proton in the low energy section of high power proton linac for an Accelerator Driven Sub-critical System （ADS）. Considering that the High Order Modes （HOMs） in the superconducting cavit     

50 MHz低噪声Colpitts石英晶体振荡器设计

该文在振荡器Leeson模型的基础上分析了有载品质因数（QL）对振荡器相位噪声的影响,且通过分析Colpitts振荡电路得到了其QL的表达式,明确了QL与电路参数的精确关系。并用安捷伦ADS软件对50 MHz Colpitts晶体振荡器的相位噪声进行了仿真,根据仿真结果在提高QL的基础上设计了一晶体振荡器样机,样机采用AT切三次泛音、49U电阻焊封装的晶体谐振器,其无载品质因数（Q0）为1.45×105。经测试得到其相位噪声指标优于-107 dBc/Hz@10Hz、-134 dBc/Hz@100 Hz和-152 dBc/Hz@1 kHz。实验结果表明,基于提高QL设计低相噪晶体振荡器的方法是可行的。     

一种基于ADS仿真的射频放大器设计方法

针对当前无线通信系统研发周期缩短、研发费用节省的需要,EDA设计工具越来越被电子技术研究的各领域所采用。以EDA中的ADS软件为设计工具,通过具体设计步骤的展示,描述了一种基于ADS仿真的射频放大器设计方法,具有积极的指导意义。在设计过程中,着重注意增益、三阶交调、稳定性等参数。最后列举了实例,说明了该设计方法的可行性。     

大型岩土体数值计算实施与autoCAD联接的主要途径

本文介绍了大型岩土体数值计算程序与autoCAD联接，实现其图形前后自动处理的命令组文件（SCR）、绘图交换文件（DXF）、autoLISP语言及C语言接口（ADS）等几种方法。     

阶跃阻抗带通微带滤波器的设计仿真与优化

介绍了阶跃阻抗谐振器(SIR)结构和原理,分析了这种结构谐振器的优越性,在此基础上结合平行耦合线滤波器设计原理设计了一个平行耦合SIR带通滤波器。结合射频和微波电路CAD软件——Angilent ADS2003对其参数进行了仿真和优化,大大提高了设计效率和质量。通过仿真结果表明,能够满足工程设计要求。     

基于TMS320F2812高速数据采集系统的设计与实现

为了实现高速同步数据采集,本文介绍了一种基于TMS320F2812 DSP芯片与AD转换芯片ADS8364构成的高速、并行高精度数据采集系统.主要包括硬件接口电路的设计、控制参数的设置以及部分关键的控制代码和实现AD采样的程序流程等.实践证明,本系统是一种比较新颖、采集精度高并且易于实现、配置灵活的数据采集系统.     

Oxygen concentration measurement and control of lead-bismuth eutectic in a small,static experimental facility

ABSTRACT

Oxygen measurement and control system is critical for minimizing corrosion in nuclear systems. Oxygen measurement and control tools use lead-bismuth eutectic (LBE) and pure lead as a coolant or as a spallation target. Oxygen can be supplied by either gas phase (H₂O or O₂) or solid phase (PbO dissolution); thus, oxygen control includes both gas phase and solid phase methods. This article focuses on oxygen concentration measurement and control of lead-bismuth eutectic in a small, static experimental facility. This facility was developed for oxygen sensor calibration and gas/solid phase control systems test programs. The oxygen sensor with Nano Cu/Cu₂O closely the Nernstian behavior down to 195°C; the oxygen sensor measurement accuracy satisfied the requirements of subsequent experiments. The gas phase control system (verified according to different type of mass transfer, such as air, H₂O, gas injection, and coverage) and the solid phase control system were very successful in small experimental devices. Accurate oxygen concentration control was achieved with both the gas and solid phase control systems.     

First nuclear transmutation of 237Np and 241Am by accelerator-driven system at Kyoto University Critical Assembly

This study demonstrates, for the first time, the principle of nuclear transmutation of minor actinide (MA) by the accelerator-driven system (ADS) through the injection of high-energy neutrons into the subcritical core at the Kyoto University Critical Assembly. The main objective of the experiments is to confirm fission reactions of neptunium-237 (²³⁷Np) and americium-241 (²⁴¹Am), and capture reactions of ²³⁷Np. Subcritical irradiation of ²³⁷Np and ²⁴¹Am foils is conducted in a hard spectrum core with the use of the back-to-back fission chamber that obtains simultaneously two signals from specially installed test (²³⁷Np or ²⁴¹Am) and reference (uranium-235) foils. The first nuclear transmutation of ²³⁷Np and ²⁴¹Am by ADS soundly implemented by combining the subcritical core and the 100 MeV proton accelerator, and the use of a lead-bismuth target, is conclusively demonstrated through the experimental results of fission and capture reaction events.     

多时空通道中子注量率密度数据采集系统方案设计

介绍了用在加速器驱动核能系统(ADS)次临界原理验证装置上的微机化多时空通道中子注量率密度数据采集系统设计方案．该数据采集系统用于采集多个空间位置的中子注量率密度水平随时间变化的数据。