蒸发冷却水质问题的分析研究

蒸发冷却空调是以水作为制冷剂,通过在西北地区的实际工程应用,发现存在着蒸发冷却器表面结水垢以及细菌滋生等水质问题.本文针对这两大问题,从产生的原因、条件以及环境等方面进行了分析;阐述了导致上述两大问题的关键原因,提出从补水、流失水比例、水系统的软化以及抗菌剂的填加等几个环节加强水质管理的措施;通过全面的分析和研究,认为蒸发冷却器不会产生军团病.     

精馏意识在空分系统操作中的运用

介绍精馏意识在空分系统操作中运用 ,举例说明了一种从全局角度考虑问题的方法 ,使操作更有预见性 ,保持精馏工况的稳定性。     

Objective Information Theory Exemplified in Air Traffic Control System

Information is the core of Air traffic con-trol system (ATCS).In this paper,objective information theory is extended to depict,model and measure the information exemplified in ATCS.The sextuple model is presented with information ontology,state occurrence time,state set,carrier,reflection time,and reflection set.The metric system is given to quantitively measure the information with extensity,detailedness,continuity,richness,containability,delay,pervasiveness,authenticity,and adaptability.The results show that the proposed method is potential to find out actual indexes in ATCS for flight safety.     

浅谈地源热泵在医院建筑中的应用

随着人们保健意识的日益提高,人们自然对医疗环境的要求也相应提高,对于现代化医疗建筑建设者来讲,营造生态保健型绿色医院就成为我们的努力方向,在现代医院建筑中引入绿色节能的地源热泵技术,使医院真正成为人类和谐舒适,环境优美,绿色生态的现代化疗养场所。因此,地源热泵系统在现代医院建筑中具有很大的应用价值,它将成为我国医院建筑节能领域重点推广的技术之一。     

Evaluation of the Thermal Comfort of a Thermoelectric Ceiling Cooling Panel (TE-CCP) System

This present work evaluates the cooling performance and thermal comfort of a thermoelectric ceiling cooling panel (TE-CCP) system composed of 36 TE modules. The cold side of the TE modules was fixed to an aluminum ceiling panel to cool a test chamber of 4.5 m³ volume, while a copper heat exchanger with circulating cooling water at the hot side of the TE modules was used for heat release. Thermal acceptability assessment was performed to find out whether the indoor environment met the ASHRAE Standard-55's 80% acceptability criteria. The standard was met with the TE-CCP system operating at 1 A of current flow with a corresponding cooling capacity of 201.6 W, which gives the COP of 0.82 with an average indoor temperature of 27°C and 0.8 m/s indoor air velocity.     

Review of groundwater cooling systems in London

The environmental impact of the UK building stock has increased the pressure on architects, engineers and building operators to reduce the use of air conditioning in favour of more passive cooling solutions. Good progress has been made in this direction but many passive solutions are limited to new-build projects. For existing buildings, and those for which mechanical air conditioning cannot be avoided, low energy cooling capability can be incorporated to improve significantly overall efficiency. This paper focuses on one such low energy capability – cooling using groundwater, which has gained popularity in recent years in the London area. Among the reasons for this are the excellent energy efficiency and the increasing viability of water extraction systems. The paper shows that groundwater cooling technology can be incorporated into newly-build and existing buildings to help reduce the environmental impact of the UK building stock.     

Experimental investigations on solar chimney for room ventilation

Experimental investigations on a small size solar chimney show that the rate of ventilation increases with increase of the ratio between height of absorber and gap between glass and absorber. This finding is in agreement with results of the steady-state mathematical model developed for analysis of such systems. Nine different combination of absorber height and air gap have been investigated on the experimental set-up. Highest rate of ventilation induced with the help of solar energy was found to be 5.6 air change per hour in a room of 27 m³, at solar radiation 700 W/m² on vertical surface with the stack height-air gap ratio of 2.83 for a 1 m high chimney.     

Performance assessment of HCFC-22 window air conditioner retrofitted with R-407C

This paper presents the experimental performance analysis of a 1.5 TR window air-conditioner, retrofitted with R-407C, as a substitute to HCFC-22. Experimental results showed that R-407C, for the operating conditions covered in this study, had lower cooling capacity in the range 2.1–7.9% with respect to HCFC-22. The coefficient of performance for R-407C was lower in the range 7.9–13.5%. The power consumption of the unit with R-407C was higher in the range 6–7% than HCFC-22. The discharge pressures for R-407C were higher in the range 11–13% than HCFC-22.This paper also presents simulation results of heat exchangers of an HCFC-22 window air conditioner retrofitted with R-407C. The simulation has been carried out using EVAP-COND, a heat exchanger model developed by National Institute of Standards and Technology, U.S.A. The simulated evaporator capacities are within ±3% of the experimentally measured cooling capacities for both refrigerants. Simulation results for R-407C and HCFC-22 are compared. The exit temperatures of R-407C are lower by 1.9 °C to 5.2 °C in the condenser and are higher by 3.2 °C to 3.8 °C in the evaporator than HCFC-22. Evaporating pressures of R-407C are higher by 4.5–5.3% as compared to HCFC-22. The pressure drops of R-407C are lower in both the evaporator and the condenser as compared to HCFC-22. The outlet temperatures of air for HCFC-22 and R-407C in both heat exchangers are nearly the same.     

基于气体流动计算的摩托车净化系统设计

排气管内的流场和温度场分布对排气净化系统的性能具有很大的影响,因此弄清楚摩托车排气 管内流场的分布情况十分必要。本文利用FLUENT软件对152QMI摩托车排气管内的流场进行模拟计 算。根据得到的流场分布合理布置催化转化器和二次空气喷射的位置,从而获得比较好的催化净化效 果以降低有害物的排放。     

Air sampling of volatile sex pheromone components in a closed jar

A cotton wool plug, used as the source for pheromone release, was placed in closed 1-quart Mason jars, either at the mouth or at the rear of the jar. Air sampling of the two components of the sex pheromone (total 2.2 mg at the source) of the almond moth (Ephestia cautella) female showed that the saturation period near the source in still air was 20–22 hr and that far from the source was 40–50 hr, reaching a level of less than 1 ng/ml air. The ratio between the components (Z,E)-9,12-tetradecadienyl acetate, designated D, and (Z)-9-tetradecenyl acetate designated M, in the air was close to the original ratio for both sampling sites, albeit somewhat richer in the more volatile (Z)-9-tetradecenyl acetate (source 77.023.0 DM, air 73.0– 74.327.0–25.7; source 80.119.9, air 77.622.4; source 25.174.9, air 23.976. 1 DM). The total amount of pheromone per milliliter of air was two to three times larger near the source than far from it at the early stages of the evaporation and saturation process. When the amount of pheromone applied to the source was tripled (7 mg), the amount far from the source was almost tripled, or the saturation time was cut by factor of two to three.