制备工艺和添加剂对TiO2体系陶瓷的复合功能特性的影响

TiO2体系复合功能陶瓷是一种兼有压敏功能和介电性能的新型功能陶瓷材料,具有压敏电压低、非线性系数高、介电常数大等优点,在微小型电子设备与器件中有广泛的用途。本文从制备工艺、添加改性等方面分析了TiO2体系复合功能陶瓷的研究现状,并对其发展方向进行了展望。     

对二甲苯直接电解氧化反应的研究

研究了在有机溶剂、支持电解质和碳棒存在下，对二甲苯的直接电解氧化反应，使用GC－MS方法分析鉴定了主要电解氧化产物，讨论了电解氧化产物成分随电解时间的变化规律，提出了对二甲苯的直接电解氧化反应过程。     

金红石与磷灰石浮选分离中硫酸铝的作用研究

研究表明．在FL108作捕收剂条件下，硫酸铝强烈抑制金红石而使磷灰石上浮，采用“FL108＋Al2（SO4）3”的浮选药剂制度，可实现两矿物的分离。通过分析Al3＋和金红石表面Ti4＋、磷灰石表面Ca2＋的水解特性，还阐述了Al2（SO4）3的选择抑制机理。     

The role of Al in C-S-H: NMR, XRD, and compositional results for precipitated samples

X-ray diffraction, compositional analysis, and ²⁹Si and ²⁷Al MAS NMR spectroscopy of Al-substituted tobermorite-type C-S-H made by precipitation from solution provide significant new insight into the structural mechanisms of Al-substitution in this important and complicated phase. Al occurs in 4-, 5-, and 6-coordination (Al[4], Al[5], and Al[6]) and plays multiple structural roles. Al[4] occurs on the bridging tetrahedra of the drierkette Al-silicate chains, and Al[5] and Al[6] occur in the interlayer and perhaps on particle surfaces. Al does not enter either the central Ca-O sheet or the pairing tetrahedra of the tobermorite-type layers. Al[4] occurs on three types of bridging sites, Q³ sites that bridge across the interlayer; Q² sites that are charge balanced by interlayer Ca⁺², Na⁺, or H⁺; and Q² sites that are most likely charge balanced by interlayer or surface Al[5] and Al[6] through Al[4]-O-Al[5,6] linkages. Although the data presented here are for relatively well-crystallized tobermorite-type C-S-H with C/S ratios ≤ 1.2, comparable spectral features for hydrated white cement pastes in previously published papers[30], [31] and [32] [M.D. Andersen, H.J. Jakobsen, J. Skibsted, Incorporation of aluminum in the calcium silicate hydrate (C-S-H) of hydrated Portland cements: a high-field ²⁷Al and ²⁹Si MAS NMR investigation Inorg. Chem. 42 (2003) 2280-2287; M.D. Andersen, H.J. Jakobsen, J. Skibsted, Characterization of white Portland cement hydration and the C-S-H structure in the presence of sodium aliminate by ²⁷Al and ²⁹Si MAS NMR spectroscopy, Cem. Concr. Res. 43 (2004) 857-868; M.D. Andersen, H. J. Jakobsen, J. Skibsted, A new aluminum-hydrate phase in hydrated Portland cements characterized by ²⁷Al and ²⁹Si MAS NMR spectroscopy, Cem. Concr. Res., submitted for publication.] indicate the presence of similar structural environments in the C-S-H of such pastes, and by implication OPC pastes.     

Electrochemical formation of AlN in molten LiCl-KCl-Li3N systems

Electrochemical formation of aluminum nitride was investigated in molten LiCl-KCl-Li₃N systems at 723 K. When Al was anodically polarized at 1.0 V (versus Li⁺/Li), oxidation of nitride ions proceeded to form adsorbed nitrogen atoms, which reacted with the surface to form AlN film. The obtained nitrided film had a thickness of sub-micron order. The obtained nitrided layer consisted of two regions; the outer layer involving AlN and aluminum oxynitride and the inner layer involving metallic Al and AlN. When Al electrode was anodically polarized at 2.0 V, anodic dissolution of Al electrode occurred to give aluminum ions, which reacted with nitride ions in the melt to produce AlN particles (1-5 μm of diameter) of wurtzite structure.     

AlN陶瓷的烧结致密化与导热性能

氮化铝陶瓷具有高热导率、低介电常数、与硅相匹配的热膨胀系数等优良特性,应用领域非常广泛。对A l N粉体的合成、烧结工艺、助烧结剂及其应用等方面进行了介绍,并对A l N未来的发展趋势进行了展望。     

电解法处理利福霉素SV钠废渣分离液的研究

根据电化学原理，采用电解法，利用铁屑与炭粒作电极，处理利福霉素SV钠药渣分离液，讨论各种因素对分离液污染物作效果的影响，COD去除率可达91．8％左右，脱色率可达95％左右。     

基于粒子群算法的轨道电路补偿电容故障诊断方法

为了延长轨道电路传输距离,改善传输效果。本文提出一种机车信号感应电压幅值包络仿真模型,它是基于均匀传输线理论,通过补偿电容对机车信号感应电压幅值包络的影响规律,使用改进粒子群算法得到当前状态下补偿电容的最优值,进而对补偿电容的故障进行诊断。仿真结果表明,这种诊断方法是可行和有效的,能快速准确地定位故障补偿电容,替补偿电容的故障诊断提供了新的有效手段。     

CMOS图像传感器中分段电容DAC非理想因素研究

CMOS图像传感器信号处理中通常采用分段电容DAC产生斜坡参考电压。研究了分段电容DAC精确的电容失配及寄生与其转换精度的关系式。基于对分段电容DAC工作原理的研究,导出了电容失配及寄生模型;针对其分数桥接电容失配、各二进制电容间的失配及寄生电容问题进行了理论分析;对分段电容DAC进行非理想因素仿真,设计了一个采用分段电容DAC的10位单斜ADC并对其进行测试,仿真和测试结果均验证了理论分析的正确性。上述理论分析结果可作为分段电容DAC的设计指导。