基于GA-SA混合寻优算法的CAPP与PPC集成原理研究

评述了CAPP和PPC集成原理,在统一资源库的约束条件下,提出了基于GA-SA混合优化策略的CAPP和PPC的集成方法;建立了基于GA-SA算法的算法基本框架、算法模型;通过实例仿真表明,GA-SA混合寻优算法较单一的GA算法具有更好的应用效果。     

装配工艺规划后处理的研究与应用

装配工艺规划是产品装配活动中的一个关键环节 ,直接影响着产品的质量和装配费用。计算机辅助装配工艺规划 (CAAPP ,ComputerAidedAssemblyProcessPlanning)在一定程度上提高了装配工艺规划的效率 ,然而它并不能完成装配工艺规划中的所有活动。装配工艺规划后处理是装配工艺规划的重要组成部分 ,它作为CAAPP的有效补充 ,利用计算机辅助手段进一步提高了装配工艺规划的自动化水平。本文提出了装配工艺规划后处理的体系结构 ,并从装配信息建模、装配工艺文件的生成和装配资源共享与信息转换三个方面对其关键技术进行了较为系统的研究     

基于Pro/E的曲轴连杆组虚拟装配技术的研究

为了实现曲轴连杆组的参数化设计和制造,提出了应用Pro-E进行三维虚拟装配模型的方法,该方法是在零件造型完成以后,根据设计意图将不同零件组装在一起,形成与实际产品相一致的装配结构以供设计者分析评估.     

运动链拓扑胚图的同构判断

平面并联机构基于胚图的综合方法中,拓扑胚图的同构判断是关键的环节。针对不含二元杆的运动链拓扑胚图,解决它们之间的同构判断问题。运动链的拓扑胚图与拓扑图相比有着独特的个性,由于在支链上没有二元点,所以图的顶点之间的关系主要是顶点之间的相对位置。根据拓扑胚图的特性,从关于图的邻接矩阵的经典理论出发,建立图的任意顶点之间的路径数矩阵,将路径数矩阵的元素按照一定规则排列成路径数组。论证了拓扑胚图同构的条件。在度序列和一阶路径数组相等的前提下,利用二阶路径数组来判断拓扑胚图是否同构。举实例说明判断过程及具体应用。拓扑胚图同构判断问题的解决不仅为基于胚图的型综合奠定了基础,而且对于某些运动链拓扑图的同构判断也具有普遍意义。     

螺栓法兰连接静密封系统中图形自动生成方法的研制与开发

本文介绍了螺栓法兰连接系统中通过对图元对象的数据封装来实现零件图参数化绘制，通过参数化装配特征点和线等方法来自动生成装配图，同时对零件图和装配图的管理方法进行了简单的阐述。实践证明，这些方法对处理结构比较简单的图形是非常有效的。     

装配体断层图像边界轮廓的提取和内外环识别

研究装配体断层图像边界轮廓的提取,提出通过构造轮廓包含树及其变形处理来识别装配体断层图像的内、外边界的方法。     

一种基于子装配体识别的装配顺序生成

装配体表达为装配连接图，在识别子装配的基础上，给出了简化装配体装配顺序的确定方法。文中对子装配的识别原则和装配顺序、装配方向的确定等问题进行了详细的阐述。     

An investigation into design and manufacturing of mechanical conveyors systems for food processing

This paper presents the results of a research investigation undertaken to develop methodologies and techniques that will reduce the cost and time of the design, manufacturing and assembly of mechanical conveyor systems used in the food and beverage industry. The improved methodology for design and production of conveyor components is based on the minimisation of materials, parts and costs, using the rules of design for manufacture and design for assembly. Results obtained on a test conveyor system verify the benefits of using the improved techniques. The overall material cost was reduced by 19% and the overall assembly cost was reduced by 20% compared to conventional methods.     

Enhancement of the critical heat flux by using heat spreader

Direct immersion cooling has been considered as one of the promising methods to cool high power density chips. A fluorocarbon liquid such as FC-72, which is chemically and electrically compatible with microelectronic components, is known to be a proper coolant for direct immersion cooling. However, boiling in this dielectric fluid is characterized by its small value of the critical heat flux. In this experimental study, we tried to enhance the critical heat flux by increasing the nucleate boiling area in the heat spreader (Conductive Immersion Cooling Module). Heat flux of 2 MW/m² was successfully removed at the heat source temperature below 78°C in FC-72. Some modified boiling curves at high heat flux were obtained from these modules. Also, the concept of conduction path length is very important in enhancing the critical heat flux by increasing the heat spreader surface area where nucleate boiling occurs.     

数控雕刻加工刀具轨迹自动生成方法

提出了基于特征的雕刻轨迹自动生成方法，分别讨论了基于谐分析特征向量组及基于分菜技术的雕刻轨迹生成过程，以及等步长法，等步长细分法，等偏差法等三种雕刻轨迹步长确定方法。