（V30Ti35Cr25Fe10）97．5Si2．5合金的结构与吸放氢性能

采用XRD，SEM和PCT测试研究了（V30Ti35Cr25Fe10）97.5Si2.5（at％）合金的组织结构与吸放氢性能。结果表明：合金由BCC相和C14 Laves相组成，BCC相含量为75％，晶胞参数为α=0．3021nm，Laves相含量为25％，晶胞参数为α=0．4920nm和c=0．7996nm。由于含有大量的Laves相，合金具有良好的活化性能，室温下不需孕育期就可以快速吸氢，5min内达到吸氢饱和状态，饱和吸氢量达到2．98％（质量分数，下同）。在一定氢压下，合金的容量可由合金中BCC相和Laves相的容量按组分的含量进行线性组合而成。     

Thermal expansion anomaly and spontaneous magnetostriction of Dy2AlFe14Mn2 compound

The structure and magnetic properties of Dy₂AlFe₁₄Mn₂ compound were investigated by X-ray diffractometry and magnetization measurements. Dy₂AlFe₁₄Mn₂ compound has a hexagonal Th₂Ni₁₇-type structure. Zero thermal expansion and negative thermal expansion were found in Dy₂AlFe₁₄Mn₂ compound in the temperature range from 184 to 264 K, and from 264 to 383 K, respectively, by X-ray dilatometry. The spontaneous magnetostrictive deformations from 104 to 400 K were calculated. The results show that the spontaneous volume magnetostrictive deformation increases firstly with increasing temperature, and then decreases with further increasing temperature.     

Ti14钛合金半固态下的变形行为研究

研究了Ti14钛合金半固态条件下的变形行为。半固态变形后．由于液相的出现，加快了原子扩散的能力．其变形激活能明显高于钛合金固态变形时的激活能。结果表明，变形后，晶界、晶内液相长大，形成了宽化的晶界和网格状结构。     

放电等离子烧结Fe3B／（Pr,Tb）2Fe14B块体纳米晶双相复合永磁体的性能

采用放电等离子烧结技术将非晶Pr4.2Tb0.3Fe78B17.5薄带制备成块状纳米晶复合磁体。研究了烧结条件对磁体密度、微观结构和磁性能的影响。结果表明，烧结温度的升高可使磁体得到高致密度，但同时由于其晶粒长大，结果导致磁性能的恶化。在最佳烧结条件下得到磁体的磁性能为Br=1．02T，JHc=220kA／m。磁体具有较好的微观结构，平均晶粒尺寸为20nm。     

00Cr17Ni14Mo2不锈钢高压管道焊接工艺

通过对某项目00Cr17Ni14Mo2厚壁超低碳不锈钢高压管道化学成分分析,对管道进行焊接工艺评定从而制定了正确的焊接施工工艺,保证了该项目00Cr17Ni14Mo2超低碳不锈钢高压管道的焊接质量,为类似的管道焊接提供了技术工艺和参数.     

粉末烧结钕铁硼激光熔凝层的易磁化轴取向

研究当各向异性粉末烧结Nd15Fe77B8永磁体的磁化方向分别与x,y,z轴平行时,其上激光熔凝层中Nd2Fe14B胞柱晶的易磁化轴的取向特征.采用XRD,SEM,Bitter粉纹等实验方法对粉末烧结Nd15Fe77B8永磁体表面的激光熔凝层进行了分析.结果表明:当磁体的磁化方向分别与x,y轴平行时,其上激光熔凝层中Nd2Fe14B胞柱晶的易磁化轴具有与粉末烧结基体相同的取向;而当磁体的磁化方向与z轴平行时,其上激光熔凝层中的Nd2Fe14B胞柱晶的易磁化轴在xoy平面内随机分布.在激光快速熔凝条件下,磁体表面激光熔凝层中的胞状Nd2Fe14B的择优生长方向为[100]晶向.     

富钕相对烧结NdFeB磁体耐腐蚀性的影响

研究了Nd2Fe14B单晶、传统烧结NdFeB磁体和放电等离子烧结（简称SPS）NdFeB磁体在电解液溶液中的电化学特性。采用扫描电子显微镜和电子能谱分析了磁体的微观组织成分。结果表明在3．5％NaCI溶液的极化曲线中，Nd2Fe14B单晶具有最高的电化学腐蚀电位，放电等离子烧结NdFeB磁体的腐蚀电位高于传统烧结NdFeB磁体。与传统烧结NdFeB磁体相比，放电等离子烧结NdFeB磁体富Nd相具有独特的分布形态，主相Nd2Fe14B晶粒细小、均匀，富钕相在主相晶粒边界上分布较少，主要集中在三角晶界处。这种组织结构有效地抑制了磁体沿富钕相发生晶间腐蚀的过程，磁体因此具有良好的耐腐蚀性能。此外，从不同稀土含量的烧结NdFeB磁体的高压加速实验中可以看出磁体的腐蚀速度随稀土含量的增加而增大。以上结果表明富Nd相的化学特性及其分布状态和含量是决定合金耐蚀性能的关键，它在合金中以网络状分布在主相晶粒边界上，并决定了烧结NdFeB易于发生选择性晶间腐蚀，从而导致耐蚀性差。     

Temperature Dependence of the Magnetocrystalline Anisotropy in Nd_2Co_(14)B Compound

Easy and hard magnetization curves of Nd_2Co_(14)B compound have been measured withextracting-sample-magnetometer(μ_0H_(max)=6T)at 10～300 K.Magnetic anisotropy constants K_1 and K_2have been determined by fitting the hard magnetization curves,in which only K_1 ,K_2 and misalignment anglehave been taken as fitting parameters.The values of K_1 and K_2 at 4.2 K were derived by extrapolation.Anisotropy coefficients,x_2~° and x_4~°were derived from the anisotropy constants.The anisotropy constant K_2increases rapidly with increasing temperature when TT_(sr).The temperature depen-dence of the magnetic anisotropy coefficient x_2~° was fitted with the formula.The anisotropy coefficients x_2~°can be well described by the tenth-power law from 4.2 K to T_(sr)and by the sixth-power law from T_(sr_ to 300 K.     

MICROSTRUCTURE OF MARTENSITE IN Cu-14Al-4Ni ALLOY AGED FOR A PROLONGED TIME AT ROOM TEMPERATURE

The microstrueture in shape memory alloy Cu—14Al—4Ni aged for two years at room temper-ature has been studied,and the substructure slow change has been observed.The domains ofhighly ordered phase and the transition regions appear at grain boundaries,the twin bounda-ries damage.Furthermore,the microstructure also gives the appearance and growth ofantiphase domains like rectangular network.The long period antiphuse boundary structuresand the antiphase domains have bee.observed first at the single diffracted vector .The con-centration gradient of solute atom Al has heen found from the matrixes to the grain bounda-ries,the matrixe is poor in Al and the grain boundaries are rich in Al.     

An LMI approach to synthesis subject to almost asymptotic regulation constraints

A multi-objective controller synthesis problem is considered in which an output is to be regulated approximately by assuring a bound on the steady-state peak amplification in response to an infinite-energy disturbance, while also guaranteeing a desired level of performance measured in terms of the worst-case energy gain from a finite-energy input to a performance output. Relying on a characterization of the controllers with which almost asymptotic regulation is accomplished, the problem of guaranteeing the desired level of performance is reduced to solving a system of linear matrix inequalities subject to a set of linear equality constraints. Based on the solution of this system, a procedure is outlined for the construction of a suitable controller whose order is equal to the order of the plant plus the order of the exogenous system.