油类对COD测定结果影响的探讨

本文通过对重油、15号机油、正已烷3种有机物质的加入实验,查明了以上物质在标准重铬酸钾法中的氧化情况,并得出在钢铁企业含油废水中,用重铬酸钾法所测得的COD值不能全部包括废水中油类(机油、重油)的有机物质的结论。     

Effects of Nd on microstructures and properties of extruded Mg-2Zn-0.46Y-xNd alloys for stent application

The microstructures, mechanical and corrosion properties of three extruded Mg-2Zn-0.46Y-xNd alloys (x = 0.0, 0.5, 1.0 wt%) were studied by optical microscopy, scanning electronic microscopy (SEM), electrochemical measurements and tensile tests. Microstructural observations indicated that Nd led to the uniformity and the variation of morphology of major second phase; tensile tests showed that Nd can improve the ductility at moderate amount (0.5 wt%) and will be detrimental up to 1.0%; Mg-2Zn-0.46Y-0.5Nd alloy exhibited excellent mechanical properties (σ_b, 269.0 MPa, σ_0.2, 165.6 MPa and elongation, 24%); electrochemical tests revealed that Nd can enhance the corrosion resistance and Mg-2Zn-0.46Y-1.0Nd alloy had lowest corrosion current density, which was reasoned that the line-shape and rodlike NdZn₂ phase might serve as corrosion barriers and the dissolved Nd can raise the electrode potential of the matrix.     

Modification of polylactide upon physical properties by solution-cast blends from polylactide and polylactide-grafted dextran

Polylactide (PLA)-grafted polysaccharides with various lengths and numbers of graft chains were synthesized using a trimethylsilyl protection method. The properties of the cast films prepared from graft-copolymers were investigated through thermal and dynamic mechanical analyses. The graft-copolymer films exhibited a lower glass transition temperature (T_g), melting temperature, and crystallinity, and higher viscosity properties compared to PLA films. Moreover, the usefulness of graft-copolymer as a plasticizer was investigated with 1:4 blend films prepared from the graft-copolymers and PLA. The blend films showed lower T_g and crystallinity, and higher viscosity properties compared to PLA films.     

Synthesis and characterization of biodegradable non-toxic poly(ester-urethane-urea)s based on poly(ε-caprolactone) and amino acid derivatives

Non-toxic biodegradable linear poly(ester-urethane-urea)s with different hydrophilic character were synthesized from poly(ε-caprolactone) as macrodiol, l-lysine diisocyanate (LDI) and ethyl ester l-lysine or l-ornithine as chain extenders. Linear segmented polymers were synthesized by the prepolymer method with a tertiary amine playing a critical role in the chain extension in heterogeneous conditions. The prepared segmented polymers were fully chemically and physically characterized, including water uptake and hydrolytic stability measurements. Depending on the poly(ε-caprolactone) length, the segmented polymers were amorphous or semicrystalline. The crystallinity degree strongly affected the mechanical properties and water uptake behaviour.     

全淀粉塑料流变性能的研究

对研制的全淀粉塑料的流变性能进行了研究，分析讨论了淀粉种类、增塑剂、基它助剂及熔融温度对全淀粉塑料流变行为的影响。     

稠油－碱水体系界面电性质研究

通过波长６００ｎｍ处透光率的测定研究了３种稠油在ＮａＯＨ水溶液中的乳化性能，测定了乳状液的ζ电位。透光率极小值和ζ电位极大值在同一碱浓度下出现。酸值较大的原油有较小的透光率和较大的ζ电位。在碱水中加入适量ＮａＣｌ可降低油水乳化所需的碱浓度，拓宽碱浓度范围。确定了ＮａＯＨ作为３种稠油驱替碱剂的最佳浓度和最佳含盐量。     

碱法造纸黑液在稠油开采中的应用研究

本文通过室内实验研究,证实碱法造纸黑液对稠油有明显的降粘作用,用降粘相图法考察了温度、稠油粘度、水的矿化度和不同来源的黑液对稠油降粘作用的影响,提出了用黑液使稠油降粘的工艺技术参数,作为油田试验的参考。由于不同造纸厂的黑液对不同油田的稠油都有好的降粘作用,因此黑液最好就近使用,以减少运输成本。     

Properties of biodegradable blend films based on fish myofibrillar protein and polyvinyl alcohol as influenced by blend composition and pH level

Effects of the ratios of fish myofibrillar protein (FMP) from bigeye snapper (Priacanthus tayenus) to polyvinyl alcohol (PVA) (FMP:PVA; 10:0, 8:2, 6:4, 5:5, 4:6, 2:8, 0:10) and pH levels (3 and 11) on the properties of resulting films were investigated. Both tensile strength (TS) and elongation at break (EAB) of films increased with increasing PVA content (p < 0.05). When PVA was incorporated up to 40%, films prepared at pH 11 had the higher TS than did those prepared at pH 3 (p < 0.05). However, as PVA content was greater than 40%, films prepared at pH 3 exhibited the higher TS than did those prepared at pH 11 (p < 0.05). Water vapor permeability (WVP) of the films prepared at pH 3 increased when PVA content increased up to 40% and decreased with further increases in PVA content (p < 0.05). PVA films had the higher TS, EAB and WVP than did FMP films and FMP/PVA blend films prepared at both pHs. Films exhibited the increased L∗ and a∗ values but decreased b∗ value with increasing PVA content at both pHs. Films prepared at pH 11 showed higher b∗ value than did those prepared at pH 3 when PVA content was greater than 40% (p < 0.05). FMP/PVA blend films exhibited the negligible transmission to the UV light. At pH 3, light transmission of the films increased as PVA content increased (p < 0.05). At all FMP/PVA ratios, films prepared at pH 11 were less transparent than those prepared at pH 3 (p < 0.05). Therefore, blend composition and pH level influenced the properties of FMP/PVA blend films.     

Natural antimicrobial ingredients incorporated in biodegradable films based on cassava starch

Biodegradable films based on cassava starch and with addition of natural antimicrobial ingredients were prepared using the casting technique. The tensile properties tensile strength (TS) [MPa] and percent elongation (E) at break [%] and the water vapor transmission (WVT) of the biodegradable films were evaluated and compared with the control (without antimicrobial ingredients). The evaluation of the Colony Forming Units per gram [CFU/g] of pan bread slices packed with the best biodegradable films, in terms of packaging performance, was also determined. The addition onto the matrix of only clove and cinnamon powders could reduce the films WVT when compared to the control, however TS and E were lower than the control and the effect of cinnamon was milder regarding this property. Since water activity of the pan bread slices packed with the biodegradable films increased considerably during the storage period, the antimicrobial effect could not be clearly determined.     

Property improvement of thermoplastic mung bean starch using cotton fiber and low‐density polyethylene

Due to high water uptake and low mechanical properties of biodegradable thermoplastic starch, thermoplastic starch prepared from mung bean starch (TPMBS) was modified by the incorporation of cotton fiber and low‐density polyethylene (LDPE). The effect of different ratios of cotton fiber/LDPE, i.e., 10:0, 7:3, 5:5, 3:7, and 0:10, on water uptake, mechanical, thermal, and biodegradable properties of TPMBS was examined. Different TPMBS samples were prepared using internal mixer for compounding and compression molding machine for shaping samples. It was found that the TPMBS incorporated with 10:0, 7:3, and 3:7 cotton fiber/LDPE showed an increase in the stress at maximum load and Young's modulus. Moreover, the water absorption of all of the modified TPMBS samples tended to decrease as compared to the pure TPMBS. Morphological, thermal, and biodegradable properties of different TPMBS samples were also investigated.