Thin conducting polypyrrole film on insulating surface and its applications

An electrically conductive plastic material was obtained by the polymerization of pyrrole on insulating polymeric materials and nylon cloth impregnated with the oxidant by vapour phase technique, resulting in a uniform, smooth and adherent coating of conducting polymer having a surface resistance ranging from 200 Ω/□ to 20 kΩ/□, which makes it suitable for applications as an antistatic material.     

多孔材料气体流量的简便计算

采用简便方法计算气体通过多孔材料的流量。当层流时，流量与压差按线性关系计算；紊流时，应按幂函数关系计算。本文提出了计算公式。     

济钢第一炼钢厂降低钢铁料消耗实践

济钢第一炼钢厂通过优化入炉原料结构,改进冶炼工艺,实施少渣炼钢,有效减少了转炉吹损,降低了钢铁料消耗成本,2002年增加炼钢综合经济效益3100多万元。     

Void formation and growth in a class of compressible solids

A new class of compressible elastic solids, which includes the Blatz-Ko material as a special case, is proposed. A closed-form solution is constructed and studied for a bifurcation problem modeling void formation in this class of compressible elastic solids. The relation between the void-formation condition and the material parameters is obtained analytically. An energy comparison of the void-formation deformation and the homogeneous expansion deformation is carried out.     

Dealing with software viruses: A biological paradigm

We introduce a probability model for populations of cells and viruses that interact in the presence of an anti-viral agent. Cells can be infected by viruses, and their longevity and ability to avoid infection are modified if they survive successive attacks by viruses. Viruses that survive the effect of the anti-viral agent may find that their ability to survive a future encounter with molecules of the anti-viral agent is modified, as is their ability to infect a healthy cell. Additionally, we assume that the anti-viral agents can be a cocktail with different proportions of agents that target different strains of the virus. In this paper, we give the state equations for the model and derive its analytical solution in steady state. The solution then provides insight into the appropriate mix or “cocktail” of anti-viral agents that can be designed to deal with the virus' ability to mutate. In particular, the analysis shows that the concentration of anti-viral agent by itself does not suffice to ultimately control the infection, and that it is important to dose a mix of anti-viral agents so as to target each strain of virus in a specific manner, taking into account the ability of each virus strain to survive in the presence of the anti-viral agents. Models of this kind may eventually lead to the computer aided design of therapeutic protocols or drug design.     

Monolithic Catalysts with Low Noble-Metal Content for Exhaust Purification of Small Gasoline Engines

A series of low noble-metal coment monolithic catalysts for exhaust purification of small gasoline engines was investigated, and it was found that the Pt/Rh-OSM/Al2O3 （where OSM was oxygen storage material） catalyst with Ce0.5Zr0.5-MnOx（3%MnOx） OSM held low light-off temperature for CO, HC, and NO; quite wide three-way window, and outstanding thermal stability. The catalyst could efficiently comrol exhaust emission of small gasoline engines.     

高炉加入含钛物料护炉的方法探讨

比较分析了目前高炉所采用的两种加入含钛物料护炉的方法，长期少量均匀加入法和间断大量加入法，并结合梅山１号高炉折护炉实践和停炉后的破坏调查结果，提出了第三种加入含钛物料的方法，即长期适量加入法。     

ZT3钛合金标准物质均匀性的检验

本文采用方差分析法和平均值一致性检验法来检验钛合金标准物质的均匀性,通过铝和硅两个元素的计算,证明该标准物质均匀度良好,数理统计在分析化学中逐步在应用,这将为今后标准物质的研制开辟新的途径。     

碳/环氧复合材料的冲击拉伸

该文研究了T300碳纤维单向增强的环氧复合材料,在应变率从10~(-3)/s到10~3/s范围内的冲击拉伸行为.通过对实验数据进行拟合,得出该范围内材料对应变率具有弱的敏感性,表现在破坏强度及破坏应变随应变率增加不显著变化,平均模量几乎不受应变率的影响.分析了试件的几何尺寸效应,讨论了应力波作用对破坏形态的影响以及实验中观察到的拔出现象.从应变率在10~2～10~3/s附近材料行为某些非确定性,指出在更宽范围内了解其性能的必要性.     

飞行器火工装置的冲击隔离结构方案实验研究

飞行器由于采用了××炸药索作为级间分离及壁板减重的火工装置，当火工品引炸时，对周围的仪器支架和脱拔插头产生高达３００００ｇ的冲击加速度。为保护仪器支架和脱拔插头，本文，总结了多种隔冲击结构方案的试验结果，选出了一种最佳方案，即二级硅橡胶缓冲器与阻尼复合结构的结合形式。该方案可使冲击加速度衰减至１６０ｇ以下。测的是周向过载。４结语粘弹阻尼复合结构用于高频响、高过载的冲击衰减系统尚是一种新的尝试。由于本课题所设计的缓冲支架采用了多级隔冲方式，冲击载荷传递的环节多，而且是三维冲击响应，载荷的波形复杂，不确定因素多，无法采用理论分析的方法进行研究。虽然如此，缓冲器的隔冲特性以及粘弹阻尼复合结构的减振性能还是可以估算的。这方面的理论问题有待于进一步研究。从试验角度而言，本次试验已解决了飞行器的仪器盒及脱拔插头的隔冲击振动问题，证明所设计的隔冲击支架满足使用要求。通过对不同支承界面联接方式的研究，选出了较佳的支承结构形式，即文中的标准状态。该结构形式隔冲击性能好，衰减倍数大，安装和更换方便，防热性能好。试验数据表明，仪器架的衰减倍数大于４００倍，脱拔插头支架大于２９０倍；在最大过载约３００００ｇ，最大响应频率约２２．４