良庄煤矿发展煤炭加工与综合利用的有效途径

良庄煤矿在发展煤炭加工与综合利用方面探索了一些有效途径 ,在洗选加工方面采用重介选煤工艺代替跳汰选 ,运行效果良好 ,利用浮选精煤制备水煤浆及燃煤锅炉改烧水煤浆、压滤煤泥发电及矸石制砖等方面均有显著的经济和环保效益     

谈金州龙舞的品牌保护与发展

金州龙舞是国家级非物质文化遗产,是一种很具特色的民间艺术形式。文章追溯了金州龙舞的历史渊源,阐述了它的制作工艺,分析了它的品牌价值,提出了金州龙舞晶牌的保护与发展策略。     

粉尘含碳球团还原方式及气氛对其还原挥发性能的影响

在1150℃和1250℃、0．1L／min和10L／min的气量下，对通人含不同CO2量的氮气影响粉尘含碳球团还原速度的实验研究表明：以滚动方式所造球团中，氧化物的还原完全以间接还原的方式进行，气氛中非还原气体流速（或流量）的增加对粉尘含碳球团氧化铁还原速度有显著的降低作用，但还原温度提高则对气量增加造成的氧化铁还原速度降低有显著的抵消作用．气氛对球团中锌的挥发速度影响很小，对铅的挥发速度几乎不产生影响．     

基于二维码的录取通知书管理系统设计与实现

从高校录取通知书管理的需求出发,设计实现基于二维码的录取通知书管理系统。介绍了二维码的概念和运用,给出了基于Zxing库生成二维码具体实现过程。     

Oxygen enrichment from air through multilayer thin low‐density polyethylene films

Several multilayer thin low‐density polyethylene (LDPE) films were fabricated by blown thin film having a thickness of 7 μm and an area of 130 cm². They were characterized for their oxygen‐enrichment performance from air by a constant pressure–variable volume method in a round permeate cell with an effective area of 73.9 cm². The relationship between oxygen‐enrichment properties, including oxygen‐enriched air (OEA) flux, oxygen concentration, permeability coefficients of OEA, oxygen, nitrogen, as well as separation factor through the multilayer LDPE films, and operating parameters, including transfilm pressure difference, retentate/permeate flux ratio, temperature, as well as layer number, are all discussed in detail. It is found that all of the preceding oxygen‐enrichment parameters increase continuously with an increase of transfilm pressure difference from 0.1 to 0.65 MPa, especially for the trilayer and tetralayer LDPE films. The oxygen concentration and separation factor appear to rapidly increase within the retentate/permeate flux ratio below 200, and then become unchangeable beyond that, whereas the OEA flux and the permeability coefficients of OEA, oxygen, and nitrogen seem to remain nearly constant within the whole retentate/permeate flux ratio investigated, especially for the monolayer and bilayer LDPE films. The selectivity becomes inferior, whereas the permeability becomes superior, as the operating temperature increases from 23 to 31°C. The highest oxygen concentration was found to be 44.8% for monolayer LDPE film in a single step with air containing oxygen of 20.9% as a feed gas and operating pressure of 0.5 MPa at a retentate/permeate flux ratio of 340 and 23°C. The results demonstrate a possibility to prepare an oxygen‐enriching membrane directly from air, based on the easily obtained thin LDPE films. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 3013–3021, 2002; DOI 10.1002/app.2331     

On the examination of recycle on heat (and mass) transfer in concentric tubes

The effect of recycle on heat (and mass) transfer in concentric circular tubes has been investigated by finite difference methods. Theoretical results show that recycle can enhance the heat transfer rate for large Graetz numbers compared with that in an open tube (without an inner tube inserted and without recycle). Competition between a preheating effect and a residence-time effect can be used to explain the heat transfer behavior. The heat transfer rate can be further augmented, with nearly no increase in total pressure drop, by employing flow pattern B instead of flow pattern A.     

Rate of adsorption to and desorption from a langmuir surface: The case of zero activation barrier to adsorption without dissociation

Many rate constants of elementary steps on single crystals have been measured. Their pre-exponential factors can now be compared to those calculated by transition state theory. Such a calculation is presented in this Letter with due attention to microscopic reversibility, standard states, and configurational entropy.     

Crystal transformation from the α- to the β-form upon tensile drawing of poly(l-lactic acid)

A film of poly(l-lactic acid) (PLLA) consisting of highly oriented α crystals was uniaxially drawn by tensile force. The effects of the draw ratio (DR), draw temperature (T_d), and draw stress on the crystal/crystal transformation from the α- to the β-form crystals were studied. At the initial stage of drawing, the highly oriented α crystals of the starting film transformed into a broader orientation distribution, and significant crystal disorder was introduced. Upon further drawing, the α crystals steadily transformed into β crystals with increasing the DR. For the drawing at a constant T_d, the crystal transformation proceeded more efficiently at a higher draw rate and, hence, at a higher draw stress. Furthermore, for the drawing at a constant draw rate, the transformation proceeded with DR most efficiently for the tensile draw at a T_d around 140 °C, although the draw stress increased with decreasing the T_d. The present result combined with the previous finding in the drawing of PLLA by solid-state extrusion [Macromolecules 36 (2003) 3601] suggests that there is a T_d of around 140 °C at which the crystal transformation proceeds most efficiently with DR, suggesting that there are two factors that have opposite effects on the efficiency of the crystal transformation with increasing the T_d. However, as a result of the combined effects of the T_d and DR on the crystal transformation and the ductility increase with the T_d, an oriented film consisting predominantly of β crystals was obtained by tensile drawing at a T_d in the range of 140-170 °C to the highest DR achieved at each T_d.     

选磷厂废水电化学处理循环利用

简要介绍磷矿浮选厂废水（尾矿水）进行电化学处理的研究和处理后循环使用的浮选工艺试验以及含固废水电化学处理的理论基础。试验结果表明：经电化学处理后的废水达到工艺用水水质控制指标；反复循环使用于浮选工艺取得满意效果；电化学处理方法是实现工业废水循环利用的有效手段。     

Fatty acid esters with short‐chain alcohols in two‐phase olive pomace oils

Two‐phase decanter olive pomace (TPOP) is the by‐product of a centrifugation system, used to produce olive oil, that separates olive oil and moist pomace. The water content in these olive pomaces is about 70%, while it was 45‐50% in the olive pomace stemming from three‐phase systems (oil, water, and pomace) and 30% in the old press system. The aim of this work is focused on quantification and changes undergone during olive pomace storage in ponds of esters of fatty acids with short‐chain linear alcohols, which can be considered as a refining loss. The results indicate that oil deterioration increases very rapidly, in particular when oil is extracted from the TPOP surface. Special attention should be paid to the storage of TPOP, establishing a maximum of 2 months in all cases.