交变光源型位敏器件应用技术

在利用直流光源型半导体位敏器件（ＰＳＤ）进行测量时，常因环境光强的改变而引起误差。本文介绍的交变调制光源及其相应的ＰＳＤ光电信号处理电路，可大大地降低和消除杂散光对测量的影响。     

单麦克风和双麦克风语音增强系统的研究

本文对采用减谱法和箱关法的语音增强系统进行了研究，系统的噪声为白噪声和普通机房噪声。减谱法采用单麦克风输入，试验中发现语音的分帧方法对消噪影响很大，通过比较得到了一种具有明显消噪效果的分帧方法，在相关法中采用双麦克风输入，对两个输入信号之间的时延差进行了补偿，在求维纳滤波器系数时，对信号谱进行统计平均，从而使消噪后的语音信号具有较好的自然度。在研究以上两种方法的基础上，我们提出了一种混合消噪系统，     

相关双取样电路在降低CCD噪声中的应用

CCD器件已经广泛地应用于各个研究领域中 ,对其信号的具体处理方法是各种各样的。我们针对所研究的对象采取了一定的降低噪声的措施 ,取得了较好的结果 ,本文将对此进行阐述     

光纤模式噪声的研究

综述了光纤模式噪声的产生、计算，并介绍了减小它的一些方法。     

Integrating neural network technology and noise analysis

The integrated use of neural network and noise analysis technologies offers advantages not available by the use of either technology alone. The application of neural network technology to noise analysis offers an opportunity to expand the scope of problems where noise analysis is useful and unique ways in which the integration of these technologies can be used productively. The two-sensor technique, in which the responses of two sensors to an unknown driving source are related, is used to demonstration such integration. The relationship between power spectral densities (PSDs) of accelerometer signals is derived theoretically using noise analysis to demonstrate its uniqueness. This relationship is modeled from experimental data using a neural network when the system is working properly, and the actual PSD of one sensor is compared with the PSD of that sensor predicted by the neural network using the PSD of the other sensor as an input. A significant deviation between the actual and predicted PSDs indicate that system is changing (i.e., failing). Experiments carried out on check valves and bearings illustrate the usefulness of the methodology developed.     

自身相位噪声测量的分析

本文分析一种不需要参考（标准）信号源的相位噪声测量系统，该系统在被测通道里插入窄带晶体滤波器滤除被测信号的大部分噪声，作为参考信号再与被测信号进行比较，实现了信号源自身相位噪声的测量．本文还介绍一种自动相位噪声谱测量装置     

'PURIFYING' NOISY SIGNALS

Abstract. A method is presented for obtaining the set of all possible pure origins of a given noisy ARMA(2,2) signal. By a transformation to a new set of variables the locus of this set becomes a straight line.     

一例风机高噪声及轴瓦烧毁的原因剖析

阐述了西林钢厂 Ｃ４００──２．１５型电动鼓风机组发生的一起高噪声及轴瓦烧毁事故、经过、现象及原因分析，并提出了对策。     

Analysis of the detectivity for triple-layer heterojunction GaSb/GaInAsSb infrared detectors

In this paper, the detectivity is calculated and analyzed with the front-or backside illuminated case for both N-GaSb/p₂-Ga_0.8In_0.2As_0.19Sb_0.81/p₁-Ga_0.9In_0.1As_0.09Sb_0.91 and N₁-GaSb/n₂-Ga_0.9In_0.1As_0.09Sb_0.91/p-Ga_0.8In_0.2As_0.19Sb_0.81 infrared photovoltaic detectors, respectively. The analysis results show that the main absorption appears in the p-type Ga_0.8In_0.2As_0.19Sb_0.81 material with either front- or backside illuminated case for above two structures. In each structure, the carrier concentration obviously affects the detectivity. The carrier concentration in the wide-bandgap material for the isotype heterojunction should be reduced as low as possible to reduce the tunneling rate at the isotype heterointerface. Moreover, the change of the detectivity with the p-side surface recombination velocity for the N₁-n₂-p structure is more sensitive than that with the p₁-side surface recombination velocity for the N-p₂-p₁ structure. In the N-p₂-p₁ structure with the incident light from the p₁-side surface, two-color detection is achieved.