Influence of Drying Conditions on Ascorbic Acid during Convective Drying of Whole Persimmons

Degradation kinetics of food constituents may be related to the matrix molecular mobility by glass transition temperature. Our objective was to test this approach to describe ascorbic acid degradation during drying of persimmons in an automatically controlled tray dryer with temperatures (40 to 70°C) and air velocities (0.8 to 2.0 m/s) varying according a second order central composite design. The Williams-Landel-Ferry model was satisfactorily adjusted to degradation curves for both control strategies adopted—constant air temperature and temperature fixed inside the fruit. Degradation rates were higher at higher drying temperatures, independent of the necessary time to attain the desired moisture content.     

超细分子筛材料的合成与应用研究进展

综述了近几年超细分子筛的合成与应用方面的研究进展,重点介绍了几种常用且研究较多的分子筛,主要包括Y,ZSM-5,β,Silicalite-1,ZSM-35,MCM-22等分子筛。对超细分子筛的合成方法及其在石化、环保和生物等领域的应用进行了介绍,并对分子筛复合材料的研究及应用的最新动态进行了评述,说明超细分子筛材料的应用领域仍在不断拓宽,超细分子筛复合材料的研究将会成为分子筛材料领域未来的重要发展方向。     

Application of degradation kinetics to the rheology of poly(hydroxyalkanoates)

The time‐dependent rheological behavior of a series of 3‐hydroxybuytrate‐based semicrystalline copolymers is employed to determine the expected rheological curves that would be generated in the absence of any polymer degradation. Both dynamic frequency sweep and shear rate sweep experiments were analyzed. A model for the degradation kinetics, coupled with standard rheological relationships, was employed to extrapolate the measured sweeps to predicted curves at time zero, prior to degradation. The model is broadly applicable over a wide range of frequencies or shear rates, and generates a single degradation rate constant k for each polymer studied. A similar, although ad hoc, procedure was applied to the dynamic storage and loss moduli. The model provides a method for determining the rheological behavior of degrading polymers over a time interval, typically found in processing applications. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102:1794–1802, 2006     

电荷灵敏放大器不用反馈高值电阻的新方法

本文提出了一种电荷灵敏放大器不用反馈高值电阻的新方法。对这种方法作了电路分析以及对实际电路的测量结果作了介绍。     

Preparations of nanosized TiO2 in reverse microemulsion and their photocatalytic activity

Nanosized titania sol has been produced by the controlled hydrolysis of titanium tetraisopropoxide (TTIP) in sodium bis(2-ethylhexyl)sulfosuccinate (AOT) reverse micelles. The physical properties, such as surface area, crystallite size and crystallinity according to R and W₀ ratio, have been investigated by TEM, XRD, BET, FT–IR, TGA and DTA. In addition, the photocatalytic decomposition of p-nitrophenol has been studied by using a batch reactor in the presence of UV light in order to compare the photocatalytic activity of prepared nanosized titania. It is shown that the anatase structure appears in the 300–600 °C calcination temperature range and the transformation of anatase into rutile starts above 700 °C. The crystallite size increases with increasing R and W₀ ratio but W₀ ratio shows a stronger effect on the crystallite size than R ratio. In the photocatalytic decomposition of p-nitrophenol, the photocatalytic activity is mainly determined by the crystallinity of titania. In addition, the titania calcined at 500 °C shows the highest activity on the photocatalytic decomposition of p-nitrophenol() and the pure anatase structure.     

Whey Drying on Porous Carriers

Whey is an undurable product. treated very often as a waste which pollutes the natural environment. Whey which is a valuable source of protein, lactose, vitamins and mineral salts should be utilized completely. The present paper is a proposal of whey drying on porous carriers. It is proved experimentally that the proposed drying method guarantees good product quality.     

高喷煤比操作对焦炭劣化的影响

为考查提高喷煤量对焦炭在炉内劣化的影响,在宝钢高炉上进行了风口取样研究.结果表明,喷煤量达到200 kg/t以上时焦炭劣化严重.高炉生产实绩回归显示,焦炭的热性能对高炉透气性的影响比冷强度显著.分析认为焦炭热性能指标CRI、CSR对高炉高煤比操作更重要.借此还提出了提高喷煤量和改善焦炭质量需加强研究的课题.     

Alkylated ureas: mineralization and evaluation as N sources

An incubation experiment was conducted for 11 weeks to study the mineralization of ten alkylated ureas and urea in soil. Six of the alkylated ureas viz. methylurea(MU), 1,3-dimethylurea(1,3DMU), 1,1-dimethylurea(1,1DMU), ethylurea(EU), 1,3-diethylurea(1,3DEU) and butylurea(BU) and urea mineralized during the experiment. Urea mineralized immediately, while alkylated ureas mineralized after an incubation period ranging from less than a week to four weeks (delay period of mineralization). The delay period increased in the following sequence MU < 1,3DMU < EU < BU < 1,1DMU < 1,3DEU, but after the delay period was over the compounds mineralized almost as rapidly as urea. The delay period varied according to the number of carbon atoms in the alkyl group and their position with respect to each other on the molecule. It appeared to be specific for each compound and was apparently not influenced by the presence of urea or other alkylated ureas. This character can be used to develop mixture of various alkylated ureas to obtain N mineralization at the desired time. Rapid evolution of CO₂ and N₂O was observed during the mineralization of urea as well as alkylated ureas. Increase in soil pH was also observed during this period. The simultaneous ocurrence of these events suggested the formation of urea as an intermediate during the mieralization of alkylated ureas. None of the alkylated ureas showed adverse affect on emergence of wheat seedlings and except DEU and BU at high concentration no other alkylated urea showed any adverse effect on initial growth of wheat seedlings.     

辐射化学基础理论研究现状 Ⅰ.初级辐解产物

本文着重于辐射作用于物质最初生成的产物,包括激发态的离子与分子,能量超过热能的次级电子等的反应以及电荷和激发能的转移,并试图论述它们的最新发展。     

A novel deep learning scheme for multi-condition remaining useful life prediction of rolling element bearings

The remaining useful life (RUL) prediction of a rolling element bearing is important for more reasonable maintenance of machinery and equipment. Generally, the information of a failure can hardly be acquired in advance while running and the degradation process varies in terms of different faults. Thus, fault identification is indispensable for a multi-condition RUL prediction, where, however, the fault identification and RUL prediction are separated in most studies. A new hybrid scheme is proposed in this paper for the multi-condition RUL prediction of rolling element bearings. The proposed scheme contains both classification and regression, where the 2D-DCNN based classifier and predictors are built concerning typical fault conditions of a bearing. For the online prediction, the raw signals are spanned in the time-frequency domain and then transferred into images as the input of the scheme. The classifier is used to monitor the vibration of rolling bearings for online fault recognition and excite the corresponding predictor for RUL prediction once a fault is detected. The output from the predictor is amended by the proposed adaptive delay correction method as the final prediction results. A demonstration is performed based on the XJTU-SY datasets and the results are compared with those from the state-of-the-art methods, which proves the superiority of the proposed scheme in improving the accuracy and linearity of RUL prediction. The time cost of the proposed online prediction scheme is also investigated and the results indicate high time effectiveness.