Effect of mineral matter on coal self-heating rate

Adiabatic self-heating tests have been conducted on subbituminous coal cores from the same seam profile, which cover a mineral matter content range of 11.2-71.1%. In all cases the heat release rate does not conform to an Arrhenius kinetic model, but can best be described by a third order polynomial. Assessment of the theoretical heat sink effect of the mineral matter in each of the tests reveals that the coal is less reactive than predicted using a simple energy conservation equation. There is an additional effect of the mineral matter in these cases that cannot be explained by heat sink alone. The disseminated mineral matter in the coal is therefore inhibiting the oxidation reaction due to physicochemical effects.     

Composition and morphology of char particles of fly ashes from industrial burning of high-ash coals with different reactivity

A comparative investigation of the composition and the morphology of char particles was conducted: char particles were recovered from fly ashes of two power stations in Russia from burning of high- and low-reactivity high-ash coals; the known results of studies of char particles generated in laboratory conditions from coals characterized according to the ASTM D388-98a standard were also used. The composition of organic and mineral components of different fraction char particles was studied. An inverse correlation between the content of the organic substance and the iron content in char particles was identified. The morphology of the char particles for the three main types (Cenospheric, Network and Solid) and the influence of coal reactivity and temperature on char morphology were investigated. The morphology of the mineral component of char particles of the two varieties of coals was also studied. It was shown that the high-temperature of industrial burning of Ekibastuz coal results in melting of the mineral substance and forming of micron-scale microspheres located in the lamellar porous structure of the carbon matrix.     

Characterization of sintered coal fly ashes

Çan, Çatala?z?, Seyitömer and Af?in-Elbistan thermal power plant fly ashes were used to investigate the sintering behavior of fly ashes. For this purpose, coal fly ash samples were sintered to form ceramic materials without the addition of any inorganic additives or organic binders. In sample preparation, 1.5 g of fly ash was mixed in a mortar with water. Fly ash samples were uniaxially pressed at 40 MPa to achieve a reasonable strength. The powder compacts were sintered in air. X-ray diffraction analysis revealed that quartz (SiO₂), mullite (Al₆Si₂O₁₃), anorthite (CaAl₂Si₂O₈), gehlenite (Ca₂Al₂SiO₇) and wollastonite (CaSiO₃) phases occurred in the sintered samples. Scanning electron microscopy investigations were conducted on the sintered coal fly ash samples to investigate the microstructural evolution of the samples. Different crystalline structures were observed in the sintered samples. The sintered samples were obtained having high density, low water adsorption and porosity values. Higher Al₂O₃ + SiO₂ contents caused to better properties in the sintered materials.     

ԥ�������С��¶���ͳ��������

豫西地区中、下二叠统太原组、山西组、上石盒子组及下石盒子组煤成气资源丰富，但成煤环境纵向发育与横向变化较大，规律难于把握。因此，开展煤成气源岩沉积环境研究有利于该区煤成气资源的勘探与开发及合理的利用。通过露头、钻井、地震资料及分析、测试资料的综合研究认为：本区中、下二叠统主要沉积了一套浅海碳酸盐岩，海湾-泻湖、潮坪、沼泽、障壁岛(砂质滩、坝)及三角洲相陆源碎屑岩和煤层。从总的沉积特征来看，下二叠统太原组、山西组基本上发育滨、浅海相碳酸盐岩、陆源碎屑岩和煤的混合沉积。上二叠统上、下石盒子组则以海陆交互相陆源碎屑沉积为主，三角洲及三角洲平原沼泽十分发育；沉积环境具有自下而上，自南东向北西方向由海相逐步过渡为陆相的基本特点。其煤成气源岩沉积环境以早二叠世山西期潮坪、泻湖过渡带之滨岸沼泽环境为最佳，其次为中二叠世下石盒子期三角洲平原沉积之平原沼泽环境。     

A source apportioned mercury mass balance across a coal-based petrochemical complex

Coal-fired power generation facilities are the largest single anthropogenic source of mercury to the atmosphere. Global mapping of anthropogenic emissions has previously estimated the mercury emission from stationary combustion from South Africa at being 82.6 tonnes per annum, but preliminary in-house calculations have placed this at a significantly lower amount. A petrochemical facility in South Africa, utilising a significant amount of coal in its gasification and steam generation processes, undertook a project to determine a mercury mass balance across the complex, and to apportion the Hg emissions from the facility.     

Investigation on interior moisture distribution inducing dielectric anisotropy of coals

Dielectric anisotropy phenomenon of coal was detectable by many dielectric measurements. The paper presented that it was attributed to coal interior moisture distribution. A new model describing interior moisture distribution was developed basing on microstructure observation of coal. In the model, coal interior moisture distribution was analyzed and simulated numerically, the relationship between interior moisture distribution and coal dielectric property was constructed, the character of the permittivity varying with moisture content had also been studied and coal dielectric anisotropy was deduced. Corresponding experiment results were well satisfied with the model analysis, demonstrating that the interior moisture content could cause coal dielectric anisotropy.     

Study of the effect of ultrasonic treatment on the surface composition and the flotation performance of high-sulfur coal

This paper highlighted the use of X-ray diffraction, scanning electron microscopy and X-ray fluorescence spectroscopy to investigate the changes on the surface composition of high-sulfur coal and pyrite before and after ultrasonic conditioning. The results showed that ultrasonic conditioning resulted in a decrease in the contents of iron and sulfur in coal, an increase in the content of element carbon, and an increase in the purity of the coal. Conversely, ultrasonic conditioning led to an increase in the content of iron and sulfur in pyrite, a decrease in the impure content of calcium, and a relative increase in the purity of the pyrite after ultrasonic conditioning. This study verified that on the one hand, ultrasonic conditioning can promote the pyrite separation from the high-sulfur coal, with the separated pyrite taking the form of FeS; on the other hand, it can produce a cleaning effect on the surface of coal and pyrite with the consequent increase both in hydrophobicity of coal and hydrophilicity of pyrite. The paper introduced ultrasonic pre-treatment of the slurry and stepped froth removal tests of high-sulfur coal and the study on the yield, ash and sulfur content of clean coal in different phases. The results gave further evidence of the increases both in the rate and the selectivity of flotation. This study shows that ultrasonic conditioning can enhance the performance of de-sulphurization of high-sulfur coal flotation.     

FAST MEASUREMENT OF ASH CONTENT IN COAL WASHING PLANT

The coal filter cake is a product of fine coal after floatation which has an ash content of 7-13%, water content of 30±2%, and a particle size of less than 1 mm. The ash content was measured by the intensity of the single backscattered gamma-ray, and its accuracy is mainly dependent on the energy of the gamma-ray. The 238Pu low energy photon source is selected in this work. The energy of its gamma-ray is 15 keV, which can result not only in the best sensitivity, but also in the lowest contribution to the environment radiation. The root mean square deviation of the ash measurement is±0.33% (±1σ).     

变频器在链条炉系统中的应用

本文介绍了链条炉的定义，链条炉应用变频调速的意义，链条炉控制系统的原理，锅炉采用变频调速控制的优点，变频调速的控制方法和逻辑，链条炉采用变频调速装置的节能分析。     

CONDITIONING COAL GAS WITH REFRIGERATED METHANOL IN A SYSTEM OF PACKED COLUMNS

Experience with the operation of a pilot-scale unit is used to outline potential difficulties in the operation of acid gas removal systems on gases produced from coal. The pilot plant has been used to condition gases produced from subbituminous coal, devolatilized char, peat and lignite. The solvent used in the acid gas removal system has been refrigerated methyl alcohol. Data from this study document accumulation of hydrocarbons, sulfur and nitrogen compounds, and mercury in the circulating solvent.