1991—1992国外工程塑料进展

介绍了1991～1992年国外工程塑料研究和生产概况。论述了通用工程塑料、特种工程塑料和聚合物合金的研究开发、改性和应用方面的进展。且指出工程塑料发展趋势和特点;对复合材料技术进展作了较详尽的分析与阐述。     

EVA／EPDM／PVC三元聚合物合金软质泡沫体的制备及其在复合衬垫中的应用

采用物理共混以及化学交联模压发泡成型工艺制备聚乙烯－醋酸乙烯酯（ＥＶＡ）／乙丙橡胶（ＥＰＤＭ）／聚氯乙烯（ＰＶＣ）三元聚合物合金软泡沫体，并制成贴布复合衬垫。讨论了该体系的相容性，动态共交联与发泡的适配，以及贴布复合，造型等问题，结果表明，该衬垫可完合替代国外同类先进产品。     

PPTA／尼龙1010分子复合材料流变行为的研究

本文采用共沉淀法制备了聚对苯二甲酰对苯二胺(PPTA)/尼龙1010分子复合材料。测定了PPTA/尼龙1010分子复合材料的流变行为,发现PPTA使尼龙1010的表观熔体粘度变大,且PPTA/尼龙1010分子复合材料的表观熔体粘度对温度的敏感性不象尼龙1010那样突出。     

Lithium/V6O13 cells using silica nanoparticle-based composite electrolyte

The electrochemical behavior of Li/V₆O₁₃ cells is investigated at room temperature (22 °C) both in liquid electrolyte consisting of oligomeric poly(ethyleneglycol)dimethylether+lithium bis(trifluoromethylsulfonylimide) and composite electrolytes formed by blending the liquid electrolyte with silica nanoparticles (fumed silica). The addition of fumed silica yields a gel-like electrolyte that demonstrates the desirable property of suppressing lithium dendrite growth due to the rigidity and immobility of the electrolyte structure. The lithium/electrolyte interfacial resistance for composite gel electrolytes is less than that for the corresponding base-liquid electrolyte, and the charge-discharge cycle performance and electrochemical efficiency for the Li/V₆O₁₃ cell is significantly improved. The effect of fumed silica surface group on the electrochemical performance is discussed; the native hydrophilic silanol surface group appears better than fumed silica that is modified with a hydrophobic octyl surface moiety.     

合成绝缘子内部缺陷的超声检测

针对合成绝缘子挂网运行后出现的界面击穿、芯棒脆断问题，研究了组成合成绝缘子各材料的声学特点及用超声波进行检测的可行性，采用的方法可实现对界面φ0.5mm圆孔气隙的检测；还研究芯棒机械强度下降与其声速变化的关系，得出了超声可以应用到实际的绝缘子检测工作中的结论。     

高耐蚀性热镀锌板的钝化处理工艺探讨

介绍了热镀锌板钝化膜的形成机理 ;针对攀钢热镀锌板出现白锈、黑斑等问题 ,分析了钝化液pH值、添加剂及操作条件对钝化膜质量的影响 ,同时提出了改进热镀锌板耐蚀性能的措施     

第62届世界铸造会议宣读论文综述(有色金属部分)

详细介绍了第 62届世界铸造会议中有关有色合金铸造的 6篇宣读论文。“铝合金压铸的压力传递与铸件质量的关系”一文提出一种新的测量铝合金压铸型腔中压力传递的方法 ,搞清了压力传递、流速与铸件质量之间的关系 ,获得了本届会议的优秀论文奖。“挤压压铸和半固态铸造生产高质量、复杂的铸件”一文展示了应用压铸高技术 ,生产出力学性能极高的汽车用复杂压铸件。“监控金属型、压铸模温度的智能系统”一文提出的智能控温系统 ,测温可靠 ,能自动控制铸型温度 ,铸型中不需开冷却水孔道。“制造金属基复合材料的复合铸造工艺 (Hybrid)”一文介绍了一种挤压铸造和熔模铸造相结合生产金属基复合材料的新工艺。“喷铸法制取铝基SiCp增强复合材料的微观组织和磨耗特性”一文指出用喷铸法制取的铝基SiCp增强复合材料 ,具有很高的耐磨性能。“不同凝固条件下 ,Na ,Ca含量对加Sb变质的 3 5 6合金力学性能的影响”一文的作者通过大量试验 ,搞清了Na ,Ca的有害作用 ,指出 3 5 6合金的σb 与δ之间存在下列关系 :σb(MPa) =2 5 .87lgδ( % ) 12 8.85。     

Al_2O_3/SiC_w陶瓷材料中晶须的极限和最佳含量探讨

从Al2O3与SiC晶须热胀失配分析入手，分析了Al2O3／SiCw陶瓷材料中晶须的极限含量，得出了晶须的极限含量为43vol％。研究表明：晶须含量超过极限值时，Al2O3／SiCw强度大幅下降的主要原因有二个，即1．材料的致密度急剧降低，气孔率增大；2．由于热胀失配所产生的残余张应力导致基体材料的开裂。通过实验证明，当晶须含量为20～30vol％时，Al2O3／SiCw陶瓷材料能获得最佳增韧补强效果。     

Automatic generation algorithm of expected results for testing of component-based software system

ContextA component-based software (CBS) system is a typical example of a composite component, which is composed of two or more atomic components. In the test of a CBS system, it is necessary to automatically generate expected results because they are compared with the actual results.ObjectiveThis paper proposes an automatic generation algorithm of expected results for the testing of a CBS system.MethodThe algorithm analyzes Input/Output (I/O) relationships of a CBS system to identify inputs that influence its outputs. Then, the algorithm uses test cases of atomic components for each input and automatically generates expected results. To evaluate the proposed approach, we compare the proposed approach with the other I/O relationship based approach via two case studies which are the CBS systems for guide robot. The comparison shows the effectiveness of our approach.ResultsTo verify effectiveness of the proposed approach, we measure the cost of manual generation of expected results for each case study. The costs are from 0.001 to 0.015 in the first case study, and are from 0.590 to 0.998 in the second case study.ConclusionThis proposed approach reduces the time-consuming and error-prone task which manually generates expected results for the testing of a CBS system.