Patterns of discrimination in hiring job applicants with disabilities: The role of disability type, job complexity, and public contact.

Objective: To evaluate the effects of disability type, job complexity, and public contact on hiring decisions. Design and Participants: An Americans With Disabilities Act (ADA; 1990) fact sheet and matched resumes with vocational and medical histories including chronic mental illness, developmental disability, closed head injury, and back injury were provided to 295 undergraduate business-related majors, who rated the applicants' suitability for 2 job positions and work shifts. Results: Findings indicated disparities in ratings of employability as a function of disability type. Paired comparisons yielded complementary findings, with effects of disability type and Disability Type × Job Complexity, but no effects of public contact. Conclusions: Stereotyping and discrimination in employment decisions apparently persist, more than 10 years after the ADA. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

油气集输管道最佳敷设方式的分析

根据大庆油田油气集输工艺设计的实践，分析了几种实用的油气集输管道敷设方式的优缺点。在对不同敷设方式的管道热耗做了较详细计算的基础上，进行了比较，提出了确定油气集输管道的最佳敷设方式：站外管道基本上采用埋地敷设；站内管道则应依据站址处的常年最高地下水位资料来确定，即在保证管道不长期受地下水浸泡的前提下，站内室外管道以埋地敷设为主，室内管道以架空与理地同时敷设为最佳；地下水位高的站内，以架空敷设最佳。     

数控加工的基本坐标系和对刀问题

数控加工中的对刀问题影响机械加工的各个方面。这里从介绍数控机床的基本坐标系出发，重点阐述了对刀的基本原理和方法以及常见数控机床对刀问题的处理。     

升深2-17井络合铝聚合物充气钻井液现场试验

为加快徐加固子深层天然气的勘探开发步伐，缩短深层气井的建井周期，在升深2-17井进行了充气钻井试验。介绍了络合铝聚合物充气钻井液技术的现场应用概况及效果以及井漏的发生与处理过程、钻井液起泡的解决措施。在现场试验过程中，络合铝聚合物钻井液性能稳定，具有较强的抑制性和较好的流变性能，流性指数控制在0．7左右，具有良好的携屑和稳定井壁能力，而且粘度较低，基本上控制在33～52s之间，满足了现场充气和脱气的需要；该钻井液抗温可达180℃，润滑性能较好，在钻井过程中无粘卡显示，在深井欠平衡井眼稳定方面取得了较好的效果；在不同的气液比条件下，可以在0．83～1．08g／cm。之间实现对当量密度的调节;与常规钻井工艺相比，充气钻井可以使机械钻速提高30％～50％；在钻进过程中实现了充气和点火同时进行，达到了欠平衡钻井工艺技术的要求，为进一步开展气体钻井打下了良好的基础。     

Experimental results of a low-power roadheader driving a gallery with different types of rock at the face

In this paper, the experimental results of a 45-kW and 15-t roadheader excavating a gallery with two different types of rock at the face using two different cutting heads are shown. It is proved that the roadheader works properly with both cutting heads. In comparison with other results in the literature, the principal parameters, i.e. specific energy, cutting rate and tool wear, are at a level that can be considered satisfactory taking into account the low power of the roadheader. On the other hand, the influence of the number of picks, which is the main difference between the two cutting heads, on the operational parameters is shown.     

铸造Ti—0.2Pd合金SF—1000双级风机叶轮的研制

Ｔｉ－０．２Ｐｄ合金ＳＦ－１０００双级风机叶轮是大型盐酸再生设备的主要部件，采用整体铸造方法制造，无论在技术上还是经济上都是十分有利的。本文主要介绍采用加工石墨，铸铁组合型，真空电弧凝壳熔炼铸造工艺，成功地研制出整体铸造风机叶轮。     

镀锌测厚仪

本文叙述了Ｘ射线荧光测厚仪的原理、特点及测量头的设计考虑原则。并以我们研制的两种镀锌测得仪为例作了详细说明。     

薄膜磁头磁轭制备工艺研究

本文重点讨论了用不同的工艺方法来制备薄膜磁头中的关键元件-磁轭。采用多次光刻的方法克服湿法工艺中磁性膜NiFe层的侧向钻蚀问题，从而实现对磁轭几何尺寸的精确控制，并对几种工艺方法的优缺点作了比较详细的分析。     

异形柱柱头混凝土连续托梁分次置换技术

通过某工程异形柱头混凝土置换实例,介绍了连续托梁分次置换技术的设计计算、施工方法和技术措施等。     

电解多功能天车打壳机构非正常失效的分析及解决方案

主要分析了电解多功能天车打壳机构中打击头、夹套、拉杆非正常失效的原因,并提出了解决的方案.