Discrimination for ablative control mechanism in solid-propellant rocket nozzle

The ablation in solid-propellant rocket nozzle is a coupling process resulted by chemistry, heat and mass transfer. Based on the heat and mass transfer theory, the aero-thermo-dynamic, and thermo-chemical kinetics, the thermal-chemical ablation model is established. Simulations are completed on the heat flow field and chemical ablation in the nozzle with different concentrations, frequency factors and activation energy of H2. The calculation results show that the concentration and the activation energy of H...     

因子分析法和熵值法在高校科技创新评价中的应用

在已有研究的基础上总结出了一套科学合理并具有可行性的高校科技创新评价指标体系,并把因子分析法和熵值法应用于高校科技创新评价.首先对高校科技创新评价体系的5个一级指标分别进行因子分析,然后运用熵值法对其确定权重.分析结果表明两种方法的结合使用能够简化分析对象的结构,使评价结果更具科学性、客观性.     

无机纳米-聚酰亚胺复合薄膜介电性研究

测试了纳米Al2O3-聚酰亚胺(PI)复合薄膜和纳米SiO2-聚酰亚胺复合薄膜的介电常数、介质损耗角正切和电导电流特性.结果表明,随着无机物含量的增加,两种复合薄膜的相对介电常数和介质损耗角正切增大,电老化阈值减小;无机物含量相同时,Al2O3-聚酰亚胺复合薄膜的相对介电常数和介质损耗角正切比SiO2-聚酰亚胺复合薄膜大,电导电流大,电老化阈值小.     

RP/RE技术与比例式设计

RP/RE制造技术与设计美学的有机结合,形成了具有竞争力和规模化的设计业,提高了企业创新设计和产品市场开发的能力.运用RP/RE技术得到实体模型,再以设计美学原则对其进行分析、数据处理、美化形态,促进产品开发、研制和销售.工业产品的形态比例关系,受诸多因素的制约.分析了传统的比例设计方法的缺陷与不足,介绍比例式设计的原理、方法及其具体应用.表明比例式设计具有数理性强,计算方便、简捷,容易掌握的特点.而且能根据功能要求、技术参数和使用对象等因素,迅速找出产品的最佳比例值,有效地解决功能和形式之间的协调关系.     

矿用产品金属外壳的电磁屏蔽效能分析

对采用单层不锈钢外壳的矿用产品的电磁屏蔽效能进行了分析与计算,得出产品金属外壳的电磁屏蔽效能与采用的金属材质、厚度以及因加工工艺形成的隙缝、开孔有关,为提高矿用产品的电磁屏蔽性能提供了工程经验。     

PWM整流器保持高功率因数运行的方法研究

针对煤矿井下电压波动严重时影响稳压电源的单位功率因数等问题,提出采用可变输出直流电压法来控制PWM整流器的直流侧电压,以保证PWM整流器处于高功率因数运行的工作状态;详细分析了直流侧电压的选取及交流侧输入电压大范围波动对交流侧输入电流及功率因数的影响,介绍了可变输出直流电压法的控制原则及软件实现。试验结果表明,在电压波动情况下,可变输出直流电压法不仅可使PWM整流器系统稳定,而且可以保持整流器的高功率因数运行状态。     

供配电系统无功补偿方案的选择

介绍无功补偿的作用、方法及原则,分析炼钢供配电系统负荷性质及无功补偿的必要性,并提出各供配电系统的无功补偿方案。     

Loss of Curing Agent During Thin Film (Droplet) Curing of Thermoset Material

Recently, it has been reported by our group and others^1.2 that loss of curing agent is encountered during the curing of small droplets or thin films of amine cured epoxies. In our earlier study³ results were reported on loss of curing agent in small droplets used in conducting the rnicrobond, single fiber test for determination of interfacial shear strength (ISS). It was reported that use of a volatile curing agent (meta-phenylene diamine (m-PDA) with DGEBA resin) resulted in increasing amounts of curing agent being lost (as measured by T₈ of the cured droplets) with decreasing droplet size during the processing procedure. Droplets smaller than 150 micrometers were seen to lose up to 40% of the curing agent leading to alteration of the mechanical properties of the droplet and, therefore, causing measured values of ISS to be exceedingly low. Use of a less volatile curing agent (Jeffamine 700, a polyether diamine, Texaco Specialty Chemicals) in combination with DGEBA resin produced results which indicated that loss of curing agent was not occuring. This study was undertaken to show the relationships between film (or droplet) size and the amount of curing agent lost (during the processing) for three different aminecured epoxy systems.     

氨水脱硫液质量对H2S吸收的影响

研究了H2S吸收液中酸性杂质对吸收平衡的影响，研究表明，H2S在脱硫液中的溶解量随着活性氨的增加而提高，随杂质含量的增加而减少，对于酸性物较多的吸收液，应相应提高总氨量，以提高脱硫液中的活性氨含量。     

一种求解命题公式骨干集的警示传播算法

警示传播WP算法是一类重要的信息传播算法,在命题公式的可满足性判定中非常有效。通过对WP算法的数学原理分析发现,当算法收敛时以高概率固定部分变元的赋值,可以对公式进行化简。基于这样的特征修改WP算法的迭代方程和变元赋值条件,设计了一种求解命题公式骨干集的信息传播算法。当变元数目超过400时,与经典骨干集求解算法对比,效率提高了40%,与目前常用算法对比也有10%的提高。结果表明,所提算法求解命题公式骨干集时非常有效。