石英砂的相变与换向器套筒铸件的变形

用呋喃树脂石英砂工艺生产牵引电机换向器套筒出现变形、裂纹等铸造缺陷,是由石英砂相变膨胀引起,后用高铬刚玉砂代替石英砂得到解决.     

连轧管生产工艺的演变与选择

介绍了浮动芯棒、限动芯棒和三辊式限动芯棒连轧管工艺的发展历程。分析了各种型式连轧管机的适用条件；并认为，各种机型装备的发展与市场需求紧密相关，单纯从技术上考虑，而追求同一机型不能带来良好的经济效益     

Ink‐eliminated waste paper sludge flour‐filled polypropylene composites with different coupling agent treatments

Ink‐eliminated sludge flour (IESF), waste residue from the recycling treatments of waste paper, was utilized as a new kind of filler to reinforce polypropylene (PP) in this research work. Different coupling agents, including maleated anhydride grafted PP (MAPP), stearic acid (SA), and titanate (NDZ‐101), were used to increase the compatibility between IESF and PP. By using different measurements, the microstructure, morphology, thermal behaviors, and mechanical properties of the IESF/PP composites were investigated in detail. It was found that IESF, as a nucleation agent, not only induced the crystallization orientation of PP but also accelerate the crystallization rate of PP. Just as indicated in the experiments, the presence of IESF has shown the advantages of increasing the dimensional stability, the hardness and the flexural property, and the presence of coupling agents has a favorable effect on the improvement of dimensional stability. Moreover, the coupling agent has minor influence on the mechanical property, even causes some decrease in the impact strength. Among these three coupling agents, MAPP is found to be the best coupling agent for increasing the interfacial adhesion between IESF and PP, and the MAPP addition makes the PP composite possess the quickest crystallization rate and greatest tensile strength. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 513–520, 2003     

搅拌设备设计的几点体会

从搅拌轴的支承条件、轴承间最佳距离的确定以及搅拌轴的稳定器等几个方面讨论 ,分析了其对搅拌设备设计的影响 ,并提出了相应的措施和方法。     

Thermal error measurement and modelling in machine tools.: Part I. Influence of varying operating conditions

Thermal error in machine tools has been observed to be closely linked to the temperature of critical elements of the machine. It was found, in the experiments conducted herein, that there was a significant increase in the axis positioning error on account of an increase in the temperature of the machine elements due to continuous operation. However, it was also observed that the specific operating parameters of the test cycles carried out also significantly affected the positioning error. Different sets of operating parameters generated significantly different error values even though the temperature of the machine elements generated by those operating conditions was similar. As such, this observation forms a very important consideration in the development of a generic thermal error compensation system. It appears to indicate that such a system needs to be capable of evaluating the compensation depending upon the temperature values of the machine elements as well as account for the effect that different operating parameters induce upon the positioning error under the same thermal condition of the machine. This paper attempts to analyse the thermal behaviour of a three-axis vertical machining centre under the influence of various operating parameters and, through the experimental results obtained, point out and explain the effect of these parameters on the axis positioning error. This behaviour forms the basis of an improved modelling methodology that is presented separately in Part II of this paper.     

Stress－rupture Property and Microstructure of Yttria Dispersion Strengthened Alloy MA956

Ｓｔｒｅｓｓ－ｒｕｐｔｕｒｅＰｒｏｐｅｒｔｙａｎｄＭｉｃｒｏｓｔｒｕｃｔｕｒｅｏｆＹｔｔｒｉａＤｉｓｐｅｒｓｉｏｎＳｔｒｅｎｇｔｈｅｎｅｄＡｌｌｏｙＭＡ９５６ＳｈａＷｅｉ（沙维）（ＤｅｐａｒｔｍｅｎｔｏｆＣｉｖｉｌＦｎｇｉｎｅｅｒｉｎｇ，ＴｈｅＱｗｅ...     

模拟时滞化学反应系统中的DK-Leap算法

最近发展的可精确模拟时滞化学反应系统的动力学状态的时滞随机模拟算法(delay stochastic simulation algorithm,DSSA)的模拟效率很低。本文提出了一个模拟时滞化学反应系统的加速DK-Leap(Delay K-Leap)算法。DK-Leap算法首先确定满足Leap条件的总反应次数K,然后利用得到τ的概率密度函数随机确定时间区间[t,t τ)。由于每个反应通道的反应次数由K确定,该算法可得到较好的模拟精度。数值试验表明DK-Leap算法在模拟时滞化学反应系统时能取得很好的性能。     

数字测控系统电磁兼容性设计技术

从模块化的角度,系统、全面地探讨了数字测控系统电磁干扰的来源及机理,并依据所建立的干扰模型和设计不等式,给出了丰富的设计对策。     

基于组态王6.5的离心泵微机在线监控系统

离心输油泵是石油化工产品输送的主要设备,微机在线监控系统主要用于炼油厂、乙烯厂、油库、输油管道等油气输送领域离心输油泵运行状态的监测、控制以及检修的预报等。本设计采用操作指导控制系统以及工厂的分布式层次化结构思想,以离心输油泵输入输出轴的振动参数为主要测试参数,并辅以离心输油泵油温、轴瓦温度监测,同时采用ADAM4000智能模块和RS—485网络,通过监控控制仪转换成RS—232信号给计算机,实现所需参数的显示与控制和计算机对离心输油泵的快速启停控制。系统软件基于Windows XP平台,运用北京亚控组态王6.5版开发而成,具有实用、实时、可靠与友好等特点。     

基于SQL的多条件选择智能实现算法

B/S架构的信息系统开发中,一般情况下,根据用户的选择,n个条件的输入组合数是2n个。但是,该文中提出的算法,其组合数仅为n到n(n+1)/2,大大简化了编程。