Discrete element approach for mine dump stability analysis

Mine overburden dumps have posed significant safety issues in the operations of various unit operations of open pit min-ing especially the external dumps. The external dumps are composed of a mixture of fragmented rocks and loose soil. Their charac-teristic is comparable to heavily discontinuous solid mass. The conventional approach of limit equilibrium methods provide safety factors for the slope but nothing about the stress-strain characteristics of the large dump mass. The designs of dump location and their respective geometry are integrated for the know-how of the stability characteristics of these dumps. The discrete element method uses a circular disk to represent the granular solid mass and their interactions are described by the Newton's third law of motion. The displacement is described by the sliding of the circular disk. This work is focused on the modeling efficiency of the discrete element methods to represent the behaviour of mine dump masses with the specified joint plane for the limit equilibrium method. The advantage of the work lies on the ease of information retrieval at any point at the dump mass concerning the stress and strain histories, displacement, failures etc. which when integrated produces a better understanding of the stability of the dump masses.     

GCr15轴承钢连铸过程中热物性参数的研究

借鉴前人实验数据,采用一定的数学方法,对轴承钢的热物性参数进行了研究.结果表明：GCr15轴承钢的液相线温度为1 465.7℃,固相线温度为1 328.4℃,零强度温度为1 380℃左右,零塑性温度为1 330℃左右;在固相区、液固两相区、液相区分别采用不同的公式进行处理,可使结果更加准确,还避免了奇异性.研究结果可为轴承钢连铸工艺有限元模拟提供基础.     

An improvement to the simulation of phase-change heat-transfer during soil freezing and thawing

A new variable time step method, which is called the backwards calculating time step method, is presented in this paper. It allows numerical simulation of soil freezing and thawing while avoiding "phase change missing and overflowing". A sensitive heat capacity model is introduced through which the calculation errors are analyzed. Then the equation using the self-adjusted time step is presented and solved using finite differences. Through this equation, the time needed for a space cell to reach the phase change point temperature is calculated. Using this time allows the time step to be adjusted so that errors caused by "phase change missing and overflowing" are successfully eliminated. Above all, the obvious features of this method are an accelerated rate for adjusting the time step and simplifing the computations. An actual example proves that this method can accurately calculate the temperature fields during soil freezing and thawing. It is an improvement over traditional methods and can be widely used on com- plicated multi-dimensional phase change problems.     

利用Liapanov直接方法判定差分方程稳定性

研究差分方程稳定性的强有力的方法是Liapanov直接方法,这一方法的核心思想是针对所研究的方程,构造出其相应的Liapanov函数,利用它来判定方程的稳定性．     

谈高职大学生职业素质教育

职业素质教育是高等职业教育以就业为导向教学改革的前提和保障,本文论述了高等职业院校实施职业素质教育的必然性、涵义、任务、内容、方法及现实意义进行了详细的阐述。     

因子分析法和熵值法在高校科技创新评价中的应用

在已有研究的基础上总结出了一套科学合理并具有可行性的高校科技创新评价指标体系,并把因子分析法和熵值法应用于高校科技创新评价.首先对高校科技创新评价体系的5个一级指标分别进行因子分析,然后运用熵值法对其确定权重.分析结果表明两种方法的结合使用能够简化分析对象的结构,使评价结果更具科学性、客观性.     

红外吸收法测硅铁中的超低硫

应用高频红外碳硫仪,建立了硅铁合金中超低硫测定方法,对选择适当的测定条件如助熔剂、分析时间等进行了探讨,最佳测定条件:最大工作电流为400～480 mA;载气纯度为99.99%;陶瓷坩埚需经1 100℃灼烧2 h后,可使空白降至最小;硫元素最短分析时间为40 s,比较水平为5.00.     

A/O法废水处理碱源的研究与实践

从理论到实践阐述了以具有价格优势的 Na OH替代 Na2 CO3做碱源 ,解决 A / O法运行成本高的问题。     

色谱顶空法测活度系数及对三元极性体系液液平衡预测

用气相色谱顶空分析法测定 18组部分互溶三元极性体系在完全互溶区的 3个组分活度系数 ,由此拟合出 U NIQU AC过量自由焓模型参数 ,再用 U NIQUAC方程预测液液平衡。这一方法曾很好地用在水-正烷烃 -醇体系。将此法拓展到含醇、酮、酯 ,醚、卤烷烃和水等多种极性组分的三元体系液液平衡的预测 ,其结果与文献的液液平衡数据比较 ,平均均方根误差 1.4 1% ,表明本法对含极性组分的体系仍然可行     

4－氨基安替比林比色法测定水中苯胺类

基于苯胺与４－氨基安替比林的显色反应提出一种新的苯胺测定方法。本方法可以测定浓度为０．０２～４０ｍｇ／ｌ的苯胺水样，方法的回收率为９５．９％～１０２％，相对标准偏差为０．６３％～１．９７％。