油气井用隔板起爆器的起爆能力

为了提高油气井用隔板起爆器的起爆能力,在传统隔板起爆器的基础上,改变了其受主装药盲孔的几何结构和受主装药结构,设计出一种油气井用隔板起爆器,并对其进行了起爆能力的实验研究.实验结果显示,油气井用隔板起爆器起爆油气井耐温传爆管的最大空气隙距离为85 mm,而传统隔板起爆器和油气井耐温传爆管分别为20 mm和65 mm,因...     

磁悬浮系统过轨道错台算法

为降低轨道质量和精度,提高磁浮列车对轨道的抗干扰能力,以两点悬浮系统为研究对象,分析过轨道错台和外界干扰引发振动时传感器测得悬浮间隙信号和电磁铁垂向速度信号的变化情况,提出一种能正确识别轨道错台的方法。根据识别出来的轨道错台信息,对设定间隙进行相应的补偿。仿真结果表明,该方法能有效地抑制轨道错台的干扰。     

OBS网络中的最小间隙组调度算法

根据OBS网络的结构和特点,分析了OBS网络核心节点的数据信道调度算法,提出了一种新的数据信道调度算法--最小间隙组调度(SGGS)算法,并详细讨论了该算法的具体实现.该算法将到达核心节点的控制包分组,然后将这一组控制包按数据包到达先后的次序调度数据信道,从而达到合理调度和使用数据信道,最终实现改善整个OBS网络性能的目的.     

退火温度对电子束沉积Ag/TiO2薄膜光学性质和光催化性能的影响

研究了退火温度对电子束制备Ag/TiO₂薄膜光学 性质和光催化性能的影响。在石英玻璃、硅片 上沉积了Ag/TiO₂复合薄膜,在空气氛围下,进行了400℃, 500℃的退火一小时.用紫外-可见分光光度 计、X射线衍射仪(XRD) 、原子力显微镜(AFM)对沉积和退火后的薄膜分别进行光学、结构、 形貌分析。结 果表明:300℃下制备的Ag/TiO₂复合薄膜为无定形结构,400℃以上薄呈多晶态。吸光度和表面粗糙度 随退火温度的增加而增大,薄膜的光学带隙随退火温度的增加而减小。锐钛矿相表现出了更 好的光催化性能。     

强光离子渗金属

随着表面工程技术的发展,各种表面涂覆方法不断出现,我们研制的强光离子渗金属,已在耐磨,耐腐蚀,元器件软件焊性方面做了应用实验,取得了良好的效果。本文就其装置及放电特性等方面进行阐述。     

基于RFID的小型天线的设计

915 MHz频段是RFID常用的频段之一,本文设计了一款该频段下工作的RFID天线,并借助ANSOFT HFSS计算软件对天线系统进行了仿真分析,通过对贴片以及接地板开槽,使天线在保持高增益的情况下,在更宽的频带上具有更好的稳定性,同时也减小了天线的尺寸,使天线整体性能更加完善。     

莱钢热连轧中粗轧控制系统的研究

粗轧控制系统主要由电动压下、液压AGC、液压APC组合而成。电动压下用于长行程辊缝调节,液压AGC用于辊缝微调和轧制过程中的厚度控制,液压APC用于位置闭环和压力闭环的调节。     

Synthesis,characterization and photo-catalytic studies of mixed metal oxides of nano ZnO and SnOx

Novel mixed metal oxides of Zinc and Tin (MZOTO) were synthesized by a simple co-precipitation method. The effect of blending varying compositions of SnO_x (x=1, 2) to ZnO has been evaluated, and it was found that the crystal structure, morphology, optical properties and photo-catalytic behavior were dependent on the percentage of SnO_x. The obtained samples were characterized using XRD, EDAX, FESEM, UV–vis spectroscopy, Photoluminescence, etc. XRD data revealed that the ZnO and SnO_x co-exist as mixture and their structures were found as hexagonal and cubic/orthorhombic respectively. FESEM image intricate about the morphology of the MZOTO prepared in 1:0.5 ratio providing nano flower structures that resemble like Chrysanthemum species. The band gaps of all the obtained MZOTOs were determined from UV–vis reflectance spectra using Kubelka-Munk relation. Photoluminescence emission studies revealed that the recombination of excited e⁻ with the h⁺ of ZnO is greatly influenced by SnO_x nanoparticles. Visible light photo-catalytic activities of MZOTOs were followed spectrophotometrically against the degradation of crystal violet solution. MZOTO2 obtained in the ratio of 1:0.5 shows better catalytic efficiency compared to other samples, degrading crystal violet completely within 40 min. The reusability and free radical trapping experiments were performed to study the performance and mechanism of MZOTO2 as the photo-catalyst. The photo catalytic efficiency of 1:0.5 MZOTO was higher due to the presence of flower-like structures that effectively captivated more photons from the sunlight.     

Bipolar transport materials for electroluminescence applications

Benzofuranyl benzene incorporating naphthyl (phenothiazinyl or dimesitylboryl) entities via meta-conjugation have been synthesized. These compounds exhibit bipolar transport characteristic with mobilities in the range of 10⁻⁵ to 10⁻⁴ cm²/V s at an electric field of 4 × 10⁵ V/cm. The compounds with two naphthyl or dimesitylboryl substituents emit in the violet region with good solution quantum yields. The OLEDs fabricated from the benzofuranyl/dimethylboryl, benzofuranyl/naphthyl and benzofuranyl/dimethylboryl/phenathiazine derivatives have maximum external efficiencies of 1.01%, 1.41% and 3.14%, respectively.     

硅树脂调制的可调光子晶体

文章提出一种利用硅树脂调节光子晶体光子带隙的方法,光子晶体波导是通过往二维正方形光子晶体的介质柱之间填充硅树脂得到的,利用温度场改变硅树脂的折射率.数值模拟结果表明:通过温度场可对这种光子晶体的禁带结构进行调节.这种可调光子晶体可应用于制作新颖的偏光片和光开关.