Application of annexation principle of thermodynamic property of In-Pb-Sb and In-Bi-Pb melts

Based on the principle of annexation and phase diagrams, the structural units of In-Pb-Sb and In-Bi-Pb melts were determined, and their calculating models of mass action concentrations were formulated. Calculated results agree well with practical values, which in turn show that the models deduced can reflect the structural realities of corresponding melts and the principle of annexation is applicable not only to some binary metallic melts, but also to ternary metallic melts.     

双轴晶体主平面上倍频的相位匹配

从折射率椭球方程和折射率椭球面出发，讨论光束在双轴晶体中传播及偏振的特性、主平面倍频共线相位匹配（PM）问题，得到了双轴晶体主平面内激光所有可能PM倍频的8种偏振组合及其相应的PM角公式、有效非线性（NL）系数deff的一般表达式。结果表明：得到的公式简单，可大大简化PM参数计算及优化设计；折射率椭球面是单层曲面，比双层的折射率面简单；基于折射率椭球面寻找所有可能PM的类型、偏振组合的方法物理图像简明，易于理解，大大降低了双轴晶体PM问题分析的难度。     

循环风与瓦斯浓度的关系

通过循环风时对瓦斯污染数学模型的建立 ,详细阐述了在各种情况下 ,瓦斯浓度的变化情况及治理措施。     

多输入单输出逆高斯分布流域汇流模型

本文将逆高斯分布应用于由水库和区间组成的复杂的流域汇流系统，并建立了多输入单输出逆高斯单位线模型。讨论了模型参数的估计方法，并对沾益流域的雨洪资料进行了实例分析。     

分段控温黄原胶发酵过程

温度是影响黄原胶发酵的重要因素之一。为了优化黄原胶发酵过程的温度控制,在5 L通气式搅拌发酵罐中,非溶氧限制的条件下,对恒温黄原胶发酵过程进行了研究。结果显示,发酵温度为28℃时,在发酵稳定期有较高的菌体浓度,所得黄原胶的丙酮酸含量与表观粘度较高,但有较长的发酵周期。而发酵温度为33℃时,有较短的发酵周期,在发酵稳定期有较高的比产胶速率,但所得黄原胶的丙酮酸含量与表观粘度较低。实验测定了控制黄原胶发酵生长期温度为28℃,稳定期温度为33℃的发酵过程数据。结果表明,与恒温发酵过程相比,通过温度的分段控制可以缩短发酵周期,提高产胶浓度及改善胶的品质,分段控温是黄原胶发酵的一种方便有效的调节手段。     

Effects of Surface Concentration on Drying Behavior of Carbohydrate Solutions

As the surface properties of the drying materials are very important not only for the drying rate but also for the quality change during drying, the effects of surface concentration on the drying behavior of liquid foods (sugar solutions) were investigated by isothermal drying experiments and by numerical calculation experiments. The isothermal drying experiments with gelled sugar solution systems (sucrose and maltodextrin) were carried out at various relative humidity (RH) values (RH = 0 to 84%). Separate experiments were carried out for determination of the desorption isotherms.

The isothermal drying curves of sugar solutions at RH = 0 to 51% were very similar. Numerical simulations also showed that the drying curves of these sugars at the surface concentration = 0 and 0.1 are almost the same, although the concentration distributions are different.

When a small amount of gelatin was added to sugar solutions, the drying rate decreased remarkably as the gelatin might form a thin film (skin) near the surface, and consequently the retention of ethanol increased.     

Understanding and Modeling the Effect of Surfactants in Enhanced Particle Removal from Surfaces in Aqueous Media

The removal of particulate contamination is a critical issue for many manufacturing processes. It is particularly critical to the electronics industry in which small pieces of microscopic debris remaining after chemical mechanical planarization (cmp) using submicron polishing particles can cause device failure. One way to enhance particle removal following the cmp process is to utilize surfactants. Recent research has shown ways to model the effect of surfactants on enhanced particle removal. However, previous research has not demonstrated the effect of ionic strength on enhanced particle removal associated with surfactant use. Past research has also not shown the combined effects of ionic strength and surfactant concentration on enhanced particle removal using surfactants. This article summarizes the parameters affecting particle removal, and it provides data and analysis on the effect of ionic strength as well as the combined effects of ionic strength and surfactant concentration on particle removal following cmp processing.     

Adaptive Edge Detectors for Piecewise Smooth Data Based on the minmod Limiter

We are concerned with the detection of edges—the location and amplitudes of jump discontinuities of piecewise smooth data realized in terms of its discrete grid values. We discuss the interplay between two approaches. One approach, realized in the physical space, is based on local differences and is typically limited to low-order of accuracy. An alternative approach developed in our previous work [Gelb and Tadmor, Appl. Comp. Harmonic Anal., 7, 101–135 (1999)] and realized in the dual Fourier space, is based on concentration factors; with a proper choice of concentration factors one can achieve higher-orders—in fact in [Gelb and Tadmor, SIAM J. Numer. Anal., 38, 1389–1408 (2001)] we constructed exponentially accurate edge detectors. Since the stencil of these highly-accurate detectors is global, an outside threshold parameter is required to avoid oscillations in the immediate neighborhood of discontinuities. In this paper we introduce an adaptive edge detection procedure based on a cross-breading between the local and global detectors. This is achieved by using the minmod limiter to suppress spurious oscillations near discontinuities while retaining high-order accuracy away from the jumps. The resulting method provides a family of robust, parameter-free edge-detectors for piecewise smooth data. We conclude with a series of one- and two-dimensional simulations.To David Gottlieb, on his 60th birthday, with friendship and appreciation.     

Density Measurement of Liquid Ni-Ta Alloys by a Modified Sessile Drop Method

The density of liquid Ni- Ta alloys was measured by using a modified sessile drop method. It is found that the density of the liquid Ni- Ta alloys decreases with the increasing temperature, but increases with the increase of tantalum concentration in the alloys. The molar volume of liquid Ni- Ta binary alloys increases with the increase of temperature ancl tantalum concentration.