GB5226.1-2008新版国家强制性标准综述

针对新版GB5226.1-2008国家强制性标准,本文介绍了该标准的基本情况、制修订背景、主要差异等方面内容,并讨论了标准的关键问题和使用指南等。     

A review of the accessibility of ACT COVID-19 information portals

Accessibility of public health websites allows important information to reach as many audiences as possible. This is vital during a public health crisis such as the current COVID-19 pandemic. This paper reviews public health information portals provided by the Australian Capital Territory local government against the Web Content Accessibility Guidelines.     

Performance of porous European mix (PEM) pavements added with crumb rubbers in dry process

Crumb rubber modifier, made from scrap tires, has been introduced into the production of different types of hot mix asphalt in either wet or dry process. To determine if the rubberised asphalt mix performs as well as polymer-modified asphalt cement (PMAC), test sections of rubberised and control PMAC porous European mix (PEM) in Georgia were examined through a visual inspection and laboratory testing. The results indicated that the performance of rubberised PEM pavements from visual inspection was almost equal to that of PMAC PEM (as the controls) with no rutting or cracking being found, except that the Cantabro test showed a higher mass loss after 3 years' service. After 5 years' service in I-75 Perry, the rubberised PEM still performed a little better rutting resistance, although the rubberised section experienced about twice cumulative traffic as compared to the control; the other visual inspections remained the same.     

Porous ceramics with tailored pore size and morphology as substrates for coral larval settlement

The growing demand for stony corals as ornamental aquarium animals requires defined aquacultural breeding strategies. For the sexual propagation of corals, material substrates are needed, that attract larvae and support their settlement and development. In this study, five types of highly porous ceramic materials were developed following the example of coral skeleton. The applicability of these settlement substrates was tested using larvae of the stony coral Pocillopora damicornis. Partial sintering of pressed clay pellets, freeze casting of clay and alumina-mullite based slurries and direct foaming of high alkane phase emulsified suspensions (HAPES) using alumina were employed. By the addition of mm-sized spherical polystyrene beads as sacrificial templates during freeze casting (alumina-mullite), superficial pores in the size of the larvae were created. The inorganic substrates featured open porosities between 35% (pressed clay) and 83% (foamed alumina), pore sizes ranging from nm to mm-scale and pore morphologies dominated by interparticle porosity (pressed), lamellar pores (freeze casting) and cellular pore types (direct foaming). The ceramic substrates were incubated in artificial sea water for 3 months to induce necessary biofilm formation and algae growth. Afterwards, individual substrates were exposed to 5 coral larvae, and their settlement behavior was monitored over 14 days. At the end of this period, all ceramic materials were successfully accepted as settlement substrates, with a mean settlement rate of 46.2%, and no significant differences between the substrate types. On samples with large surface superficial pores, a significantly reduced survival of settled larvae (79%) compared to the other porous materials (93–98%) was determined, suggesting a non-ideal surface topography. While alumina foam samples (HAPES) exhibit the most promising results in terms of settlement and survival of larvae, clay-based substrates provide a more economic solution for the sexual propagation of corals in aquaculture.     

Optimization of Improvable Flows by combining BAT Analysis and process simulation

This paper proposes a methodology to improve the sustainability of industrial processes combining two tools: BAT Analysis and process simulation. Both tools are jointly applied to identify the IF of the analyzed process, so that the most appropriate candidate techniques from an inventory can be selected. The selected alternatives are tested in different scenarios that are evaluated using simulation, which would determine the configuration that best improves the sustainability of the process. The combination of both tools in an integrated methodology will help decision makers to select the most sustainable configuration for a given process. The methodology is validated in a case study: a hydrogen production plant. After analysing several scenarios where different candidate techniques are implemented, results show that the IF identified can be highly improved when the appropriate combination of BAT is applied.     

Pragmatism or idealism? An urban perspective onto the politics of interurban cooperation for sustainability in the EU

European cities have been committed to achieve urban sustainability, participating in interurban networks dealing with socio-ecological issues. By examining the incentives derived by the involvement in these networks and the municipal political milieu where the decision about network participation is taken, this article seeks to understand the motivations for European cities to take part in sustainability networks. To do so, a small-N qualitative analysis was undertaken. The results show that cities’ participation in socio-ecological urban networks (SEUNs) is motivated by the economic, political and formative incentives that membership provides, and is influenced by institutionalised values, political agency and previous cooperative experience.     

电力变压器IEC国际标准最新进展

以电力变压器专业相关的国际标准为主线,提供了已发布实施的和正在制、修订标准的相关信息,重点介绍了IEC/TC 14各工作组目前正在开展的相关标准制、修订工作,同时给出了下一步将要开展的标准制、修订计划项目。     

基于改进KNN算法的AVS到H.264/AVC 快速转码方法

尽管音视频编码标准(Audio and Video Coding Standard,AVS)的编码性能可以与H.264相媲美,但是H.264的应用范围更加广泛,因此视频由AVS标准转码成H.264标准具有很大的应用前景.目前,主流的转码方法是将AVS的分块模式与H.264的分块模式映射的方式降低转码复杂度,但是技术之间的差异导致这两种标准之间的分块模式并不是一一映射的关系,因此会导致编码效率大幅度降低.提出一种基于改进KNN(K最邻近节点)算法的AVS到H.264/AVC快速转码方法.充分利用了AVS码流中的各种信息,通过改进的KNN算法建立了中间信息和H.264分块模式之间的映射模型.根据AVS中运动矢量信息的差异自适应确定H.264可能的分块模式,实验结果表明上述问题得到有效解决,该算法在保证H.264编码效率的前提下大幅降低了转码复杂度.     

Architectural Patents and Open-Source Architectures: The Globalisation of Spatial Design Innovations (or Learning from ‘E99’)

Patents are the strongest form of intellectual property rights available internationally, so far unbeaten by open source as a body of innovation and know-how. Mark Garcia , senior lecturer in the Department of Architecture & Landscape at the University of Greenwich, London, here considers the pros and cons of the patent system for architects in the digital age: from issues over patent categorisation by type, to possibilities of micro-royalties through the capacity of design software to track every stage of input from multiple contributors.     

Labelling accuracy in Tasmanian seafood: An investigation using DNA barcoding

Mislabelling of seafood products has been documented in numerous countries for over three-quarters of a century. With a trend towards increased consumption of seafood, the informed consumer demands accurately labelled products that provide full disclosure of composition. DNA barcoding can be used to accurately identify a seafood product to species based on its genetic signature, and so provides a means to test the authenticity and accuracy of seafood labelling. This can be especially useful for products such as fillets which have few or no unambiguous identifying characters, and can easily be mislabelled. We investigated labelling accuracy in seafood retailers in Tasmania, Australia. Thirty-eight seafood products were obtained from seafood retailers, sequenced for the barcoding gene region cytochrome oxidase subunit 1(CO1), and subsequently identified to species level by querying GenBank and Barcode of Life Data Systems (BOLD) DNA sequence records. Results were compared with standard fish names (SFN) prescribed under the Australian Fish Names Standard (AFNS) and FishBase. Of the 38 samples, none were deemed to have been mislabelled under Australian regulation, although in some cases naming discrepancies and ambiguity may cause confusion for some consumers. Our work, while reflecting high standards in Tasmanian seafood, highlights the need for mandatory standard labelling across all seafood products so as to eliminate any possible misrepresentation.