Synthesis of Nearly Monodisperse Iron Oxide and Oxyhydroxide Nanocrystals

Uniform magnetite, hematite, and goethite nanocrystals were prepared through an attractive method based on an oleic acid/alcohol/water system. By adjusting the synthetic parameters (base concentration, alcohol content, categories of alcohols, etc.), the controlled synthesis of uniform magnetite, hematite, and goethite nanocrystals can be easily achieved. Detailed investigations on the effect of the experimental parameters on the morphology of the final products and the phase transitions among the magnetite, hematite, and goethite phases were carried out. Finally, a method of doping other metal ions into magnetite was developed and the magnetic properties of magnetite doped with different metal elements were studied.     

Prebiotic synthesis of sequential peptides on the Hadean beach by a molecular engine working with nitrogen oxides as energy sources

Addressing the still open question of the prebiotic origin of sequential macromolecules (peptides, nucleic acids) on the primitive Earth, we describe a molecular engine (the primary pump), which works at ambient temperature and continuously generates, elongates and complexifies sequential peptides. This new scenario is based on a cyclic reaction sequence, whose keystep is the activation of amino acids into their N‐carboxyanhydrides (NCA) through nitrosation by NOx. This process could have taken place on tidal beaches; it requires a buffered ocean, emerged land and a nitrosating atmosphere. With the help of geochemical studies and computer simulations of atmosphere photochemistry, we show that the primitive Earth during the Hadean may have satisfied all these requirements. © 2001 Society of Chemical Industry.     

Obtaining Characteristic 4f–4f Luminescence from Rare Earth Organic Chelates

We report a study of a series of heavy rare earth tris‐8‐hydroxyquinolines (REQ₃s), using UV‐visible absorption spectroscopy, infrared absorption spectroscopy, and photoluminescence (PL) measurements. We show that the heavy REQ₃s are all chemically similar to each other and to aluminium tris‐8‐hydroxyquinoline, at least in terms of the ligand behavior. Characteristic rare earth 4f–4f luminescence is only observed for ErQ₃ and YbQ₃ due to the relatively low energy of the ligand triplet state. We show that a triplet transfer mechanism cannot be responsible for the observed Yb 4f–4f luminescence observed in YbQ₃. Instead, an internal chemiluminescent process is shown to be energetically favorable. The thin film PL spectra of all the heavy REQ₃s are dominated by triplet emission, except for that of ErQ₃, for which transfer to the Er³⁺ ion represents an efficient alternative. The PL spectra of powder samples, which would be expected to consist of approximately equal amounts of both isomers, are dominated by singlet emission. This is in contrast to the results from the thin films, and suggests that the isomer which predominates in the thin films has a much higher intersystem crossing rate than the other isomer.     

High‐Tech‐Cellulose‐Funktionspolymere nach dem ALCERU®‐Verfahren

Functional High‐Tech‐Cellulose materials by the ALCERU® process Cellulose is one of the eldest materials of mankind. While the use of cellulose in former times was focused on application as a more construction or as a more textile material at present time the application profile turns to a more functional material using the ALCERU® process. Shaping of pure cellulose dissolution in NMMNO permits the manufacturing of materials for upholstery, filtration or biodegradable film strips having an uniform cross section. Fibreds, which can be applied in several packaging materials, are available using different techniques for regeneration cellulose. A great field of innovative functional cellulose materials is opened up by addition of several functional additives to cellulose dissolution. In this way piezo‐electrical conductive cellulose fibres (PZT) or high‐temperature filtration membranes are to be generated if one adds special types of ceramic powders. Above all PZT green fibres are applied in more recent uses as sensors or actuators. Electrically conductive cellulose fibres or filaments, which can be also used in the textile chain, can be prepared adding conductive carbon black to a cellulose dope on the same way, too. Cellulose material having adapted conductivity to different application is available by adding an exact defined amount of carbon black to cellulose dissolution. Finally cellulose beads can be manufactured by means of varied shaping technique. The beads are showing variable particle sizes and narrow pore size distribution. These properties open up very interesting application in the field of human blood purification or chromatography.     

Near‐Infrared Light‐Emitting Diodes (LEDs) Based on Poly(phenylene)/Yb‐tris(β‐Diketonate) Complexes

Near‐infrared‐emitting electroluminescent (EL) devices using blue‐light‐emitting polymers blended with the Yb complexes Yb(DBM)₃phen (DBM = dibenzoylmethane), Yb(DNM)₃phen (DNM = dinaphthoylmethane), and Yb(TPP)L(OEt) (L(OEt) = [(C₅H₅)Co{P(O)Et₂}₃]^–) have been studied. EL devices composed of Yb(DNM)₃phen blended with PPP‐OR11 showed enhanced near‐IR output at 977 nm when compared to those fabricated with Yb(DBM)₃phen/PPP‐OR11 blends. The maximum near‐IR external efficiencies of the devices with Yb(DBM)₃phen and Yb(DNM)₃phen are, respectively, 7 × 10^–5 (at 6 V and at 0.81 mA mm^–2) and 4 × 10^–4 (at 7 V, and 0.74 mA mm^–2). The optimal blend composition for EL device performance consisted of PPP‐OR11 blended with 10–20 mol‐% Yb(DNM)₃phen. A device fabricated using Yb‐(TPP)L(OEt)/PPP‐OR11 showed significantly enhanced near‐IR output efficiency, and future efforts will focus on devices fabricated using porphyrin‐based materials.     

High‐Tg Carbazole Derivatives as Blue‐Emitting Hole‐Transporting Materials for Electroluminescent Devices

A series of dicarbazolyl derivatives bridged by various aromatic spacers and decorated with peripheral diarylamines were synthesized using Ullmann and Pd‐catalyzed C–N coupling procedures. These derivatives emit blue light in solution. In general, they possess high glass‐transition temperatures (T_g > 125 °C) which vary with the bridging segment and methyl substitution on the peripheral amine. Double‐layer organic light‐emitting devices were successfully fabricated using these molecules as hole‐transporting and emitting materials. Devices of the configuration ITO/HTL/TPBI/Mg:Ag (ITO: indium tin oxide; HTL: hole‐transporting layer; TPBI: 1,3,5‐tris(N‐phenylbenzimidazol‐2‐yl)benzene) display blue emission from the HTL layer. The EL spectra of these devices appear slightly distorted due to the exciplex formation at the interfaces. However, for the devices of the configuration ITO/HTL/Alq₃/Mg:Ag (Alq₃ = tris(8‐hydroxyquinoline)aluminum) a bright green light from the Alq₃ layer was observed. This clearly demonstrates the facile hole‐transporting property of the materials described here.     

Eigensolution of specially structured matrices with hyper‐symmetry

Recently, four canonical forms have been developed and applied to the dynamics and stability analysis of symmetric frames. In this paper, hyper‐symmetric matrices and specially structured matrices are defined and efficient methods are proposed for the eigensolution of such matrices. Applications are extended to hyper‐graphs and specially structured graphs. Simple methods are developed for calculating the eigenvalues of the Laplacian matrices of such graphs. The developments presented in this paper can also be considered as generalization of Form II and Form III symmetry, previously defined by the authors. Copyright © 2006 John Wiley & Sons, Ltd.