Characterization of rheological properties of systems containing sugar substitutes and carrageenan

The effects of addition of κ-carrageenan to solutions containing 40% (w/w) sugar substitute on the rheological properties of these systems were investigated at 25 °C using a rotational viscometer at rotational speeds of 6, 12, 30, and 60 rev min⁻¹. The flow behaviour of the solutions was adequately described by the power law model with or without yield stress. The consistency index ( K ) and the flow behaviour index ( n ) were determined from shear stress vs. shear rate data. The flow parameters of the solutions depended on the carrageenan concentration. The apparent viscosities of the systems decreased with increasing shear rate, indicating pseudoplastic behaviour. The final carrageenan concentration was found to be an effective factor controlling the degree of sliminess of the model food systems studied.     

利用梯度方向信息的随机Hough变换

针对随机Ｈｏｕｇｈ变换（ＲＨＴ）在处理复杂图像随机采样造成的大量无效积累提出一种改进的用于直线检测的ＲＨＴ，较发地解决了无效果累积问题，并使改进后的算法具有计算速度更快，占用内存更少以及检测性能更好等优点。     

��Ȼ����������ϵͳ�ļ춨��У׼

当前我国管道天然气计量系以体积表示，就其计量器具而言，差压式流量计、容积式流量计和速变式流量计都有，但大流量计量大多仍采用标准孔板差压式流量计，其流量计量标准招待我国SY／T6143－1996《天然气流量的标准孔板计量方法》。文章介绍目前常用的三种流量计的优缺点比较；天然气标准孔板差压式流量计算机自动计量系统的检定，其中包括：标准孔板节流装置，静压、差压变送器、温度传感器、数据采集系统等组件的检定；以及计量器具的正确使用和维护。最后，文章指出目前流量计量的发展主要是二次仪表的发展，籍助应用计算机大大提高流量法的测量范围和准确度，但对用户来说，应选择性／价比合适的仪表，并要考虑所选用仪表要便于检定、维护，同时，计量检定部门则应跟上发展，为广大用户提供技术支持。     

基于空间矩的灰度边缘亚像元度量精度分析

灰度图像中边缘定位受采样密度限制，亚像元精度度量方法在需要高精度的应用中受到重视，要想知识到底需要多高的分辨率才能达到定精度指标，就有必要分析特征定位方法的最坏情况的精度，文中用分析和实验的方法给出了基于空间矩的边缘定位方法，对于边缘点，边缘直线以及直边缘区域的最坏情况定位精度分析。分析和讨论的结果不但可以用来确定已知形状位置估计的最大误差，而且还可用于对准的形状几何参数，以获得较高的精度。     

高功率激光焊接光致等离子体的检测

系统地归纳了高功率激光焊接过程中光致等离子体的声、光、电、热等四种特征信号，综述了国外在等离子体信号检测方面的试验方法及研究进展，分析了未来的发展趋势     

Vital-Fluorochromization of Microorganisms Using 3′,6′-Diacetylfluorescein to Determine Damages of Cell Membranes and Loss of Metabolic Activity by Ozonation

Cell suspensions of Escherichia coli as a model for bacterial populations in wastewaters were treated with ozone as a disinfectant in a continuously operated pilot plant with a plug flow reactor. Suspensions with an initial number of CFU (colony forming units) of 10⁸ mL^?1 were ozonized with ozone concentrations up to 12 mg/L. Metabolic activities and membrane functions break down with increasing ozone concentrations. The fluorochromization using 3′,6′-diacetylfluorescein (FDA) proved to be a suitable method for the detection of an alteration in permeability of the cell membranes and an inactivation of metabolic activity. By fluorescence microscopic and photometric investigations it could be clearly demonstrated that, in the case of disinfection with ozone, inactivation of the cells includes first of all a damage of the cell membranes. In contrast to the determination of the number of CFU, fluorochromization allows the detection of alteration in metabolic activities.     

一种基于Hough变换的声呐对目标航迹检测算法研究

为提高声呐对目标航迹的检测性能,从单部声呐时间融合的角度出发,提出了一种基于Hough变换的声呐信号检测算法。该算法把航迹上的观测点变换为参数空间的对应曲线,充分利用一段时间内的目标观测数据,在低信噪比下也能从背景噪声中提取目标的航迹特征,提高了声呐的检测概率,且对部分信息和数据的缺失不敏感。仿真试验证明了该算法的有效性。     

焦炭反应性试验影响因素分析

针对梅山自产焦炭，利用梅山焦炭反应性试验设备，通过改变焦炭块数、CO2流量和温度等控制参数，讨论了这些参数对焦炭反应性和反应后强度检测值的影响，以及保证测定可靠性应采取的控制措施。     

Axisymmetric extrusion through adaptable dies—Part 1: Flexible velocity fields and power terms

An adaptable die is one that not only produces the correct geometrical shape, but also is designed through an adaptable method to impart other desirable properties to the product or process. In this first part of a series of papers, six kinematically admissible velocity fields are developed for use in upper bound models for axisymmetric extrusion through various dies, including extrusion through adaptable dies. Three base velocity fields are presented:

(1) assuming proportional angles in the deformation zone,

(2) assuming proportional areas in the deformation zone, or

(3) assuming proportional distances from the centerline in the deformation zone.

The base velocity is modified by an additional term comprised of two functions. One function allows extra flexibility in the radial direction, and the second function allows extra flexibility in the angular direction. There are two forms of the second function, which meet the required boundary conditions. The flexibility function in the radial direction is represented by a series of Legendre polynomials, which are orthogonal over the deformation region. The power terms derived for these velocity fields for use in upper bound models are also presented.Part 2 of this series compares the results obtained in upper bound models for the six velocity fields for a spherical extrusion die. In Part 3, the use of the best velocity field for extrusion through streamlined dies is developed to determine the adaptable die shape, which minimizes the required extrusion pressure. Additionally, the adaptable die shape is compared with results from Yang and Han for arbitrarily curved and streamlined dies.     

双辊薄带钢连铸在线自动检测系统

介绍了双辊薄带钢连铸工艺,设计了双辊连铸机的计算机在线自动检测系统,通过采取正确的抗干扰措施提高了检测的精度,系统在双辊薄带钢连铸试验中应用效果良好.