利用计算机进行油气资源评价和勘探决策

本文着重介绍了构成《现代勘探决策理论系统》的5个主要计算机模块,即:生油岩热演化处理、求任意曲边形面积、数学模拟预测资源量、勘探经济评价分析及决策、辅助处理等模块。该系统曾在塔里木盆地和准噶尔盆地的油气资源评价和勘探决策中发挥了作用,受到了专家和用户的好评。     

考虑环境影响的水电站水库模糊优化调度模型及其应用

本文在提出一种水电站水库优化调度准则的基础上,建立了考虑环境因素影响的水电站水库模糊优化调度模型,实例研究表明,所建模型是有效的、适用的。     

手写体汉字识别问题综论

本文在讨论了人对汉字的认知心理试验研究结果之后,认为人类的汉字识别是经由整字属性及分层结构的多种途径复合而成的。这些途径中的大多数都可以在手写体汉字的机器识别中模仿运用。由此可把汉字的机器识别方法归纳为整模式法和子模式法两个大类,对它们的有利方面和困难方面进行了讨论;对影响其性能的因素进行了分析;对识别率以及它与识别字集大小和后处理等的关系提出了评估的问题。     

A comparative study of color measurement lntstrumentation

A multiplant Quality Improvement Team [QIT] was firmed to develop and implement an evaluation program for various color measurement .systems as potential replacements for the then-current aging systems. The emphasis qf this article is the analytical methodology utilized to evaluate the various color systems. The evaluation program consisted cf two phases. Phase I was a general overview/review of several systems, while Phase II was an extensive internal comparative evaluation measurement systems. These were Milton-Roy's ColorMate HDS, HunterLab's Ultrascan, Datacolor's CS-5, and BYK-Gardner's The Color Sphere [TCS]. The main comparison criteria were interinstrument agreement [agreement between two instruments ofthe same system], user-friendly software and computer interface capability, vendor amenability to a long-term logistical and maintenance relationship, and price. All systems were evaluated by duplicate measurements on various color tiles, yarns, and polymer flakes-over 1600 measurements on each system. The systems were compared with an instrument matrix, a decision matrix, and a product matrix. The instrument matrix was a comparison qfinstrument parameters, software/math treatments, and economics. The decision matrix was a forced ranking of each system by each criteria category [1–4 scale, with 1 representing the best and 4 representing the worst]. The product matrix accentuated the relative importance ofone criterion category over another by multiplying the forced ranking by the criticality of the category. The criticality of a given category wus determined by consensus within the QIT. Thr combination qf the three matrices allowed the evaluator[.s] t o select the color rneasuremmt system that best satixfied the color measurement needs and requirements of their facility and their products. For this evaluation, all ofthe evaluated systems were superior to the then-current agingsystems. As a result of this methodology, one instrument emerged as clearly superior. © 1994 John Wrley & Sons, Inc.     

羊皮服装革的弯曲应力松弛性能及其与(手感)弹性之关系研究

本文研究了羊皮服装革的弯曲应力衰减性能。对应力衰减常数（αｂ）及其与羊皮服装革手感弹性的关系进行了讨论。结果表明：αｂ与革的手感弹性相关。αｂ值定量反映出革的手感弹性优劣。     

模糊综合评判方法在碳酸盐岩油气勘探中的应用

详细地阐述了模糊综合评判方法的数学原理及其在油气勘探开发中的应用.根据某油田的生产层参数资料,运用MICROSOFT EXCEL软件,在对各参数进行统计研究并了解它们分布规律的基础上,合理地构造出一系列隶属函数,通过编制相应的计算机程序,完成综合评判.评判结果与勘探实际吻合较好.该方法有效地适用于碳酸盐岩油气藏的勘探开发.     

激光器实用价值的评判

提出用于评价激光器产品实用价值的Q因子,它由激光器的亮度、脉冲宽度及价格确定。Q值大的激光器,开发及发展的潜力大。     

Nondestructive evaluation of pavements using spectral analysis of surface waves in the frequency wave-number domain

The potential of using Spectral analysis of surface waves (SASW) for nondestructive testing of pavement and soil sites has been demonstrated in several publications. The usual SASW field testing and data analysis procedures and the assumption of a single propagation mode yield accurate results when there are no sharp changes in the stiffness of the site with depth. When this is not the case, however, difficulties arise in the interpretation of experimental data due to the participation of more than one mode in the wave field. In an earlier study, the multiple filter/crosscorrelation technique was suggested for analyzing multi-mode SASW signals. This technique, however, may not yield accurate results when propagation modes are closely spaced. A more general method using spectral analysis in the frequency wave-number domain is presented in this paper. Formulas are presented for determining a reasonably small number of surface measurements, and the accuracy of this method in resolving experimental dispersion curves is demonstrated for a pavement site.     

数控机床交流伺服系统的复合控制研究

针对常规P-P与PPI控制存在的问题，提出了在数控机床交流伺服系统中，采用带速度和加速度作为前馈控制，模糊自校正PID控制作为位置反馈控制的复合控制器，实验证明可以显著提高控制系统的控制精度，大大降低跟踪误差，具有较强的鲁棒性。