Asbestos replacement aspects: Modification of the fibre-matrix interphase in lonomer based composites

Asbestos fibres, of the chrysotile variety, and chopped carbon fibres were pretreated by an in-situ polycondensation technique eventually resulting in a polyamide coating on the fibre surface. Ionomer based composites containing either carbon or asbestos fibres in random in plane fibre orientation were prepared, and the influence of this coating process on the tensile properties was investigated. It was found that for the asbestos-filled composites the presence of the nylon 6,6 interlayer improves the tensile performance, especially at moderate polyamide depositions. This is not the case with the pretreated carbon-filled composites for which carbon fibres with higher polyamide contents are preferred. Combinations of the treated asbestos fibres with carbon and/or aramid fibres may be used to reduce the asbestos content in asbestos-only based engineering plastics.     

复合材料压缩破坏模式的缺陷敏感性

本文基于弹塑性分叉理论研究单向纤维增强复合材料的压缩破坏模式和压缩强度对缺陷的敏感性问题。对于常见复合材料,所得结论是:无缺陷或者小缺陷情况的破坏模式为倾斜破坏带;大缺陷情况的破坏模式为水平破坏带;形成水平破坏带的压力值小于形成倾斜破坏带的压力。     

Bruchanalyse an Hohlgläsern

Failure analysis of hollow glasses The failure analysis is very important to clarify damages of hollow glasses. Damages of glass bottle through over pressure are very often linked with damages to persons. This is the reason why the causal research is from particular importance. Different surface characteristics of glass fragments as well as the fracture pattern give hints to the direction of the crack, the stress just before breakage and the reason of stress. A reconstruction of the bottle is a further helpful instrument for cause studies. The difference of the various characteristics of the surface will be explained. Further on there will be discussed different reasons and mechanism of fracture.     

Methacrylic acid–acrylamide-g-poly(ethyleneterephthalate) fibres for urea hydrolysis

This paper presents the results of urease immobilization onto methacrylic acid–acrylamide grafted poly(ethyleneterephthalate) fibres. The graft yield strongly affected the maximum activity of the immobilized enzyme up to a value of 70·2%. Higher grafting caused a decline in urease activity and led to the degradation of the fibres. The minor changes observed in K_m and V_max demonstrated that the conformational changes existed during immobilization were not extensive. However, 70·2% methacrylic acid–acrylamide-g-fibres containing urease were more stable towards acidic and alkaline pH, high temperature and storage conditions compared with free enzyme. Apart from the increase in stability to heat inactivation, the initial enzymatic activity of the urease–fibre system remained almost unchanged even after 40 repeated assays corresponding to 10 h of operation in 4 months, indicating the excellent durability of the system.     

Influence of Drying Conditions on Ascorbic Acid during Convective Drying of Whole Persimmons

Degradation kinetics of food constituents may be related to the matrix molecular mobility by glass transition temperature. Our objective was to test this approach to describe ascorbic acid degradation during drying of persimmons in an automatically controlled tray dryer with temperatures (40 to 70°C) and air velocities (0.8 to 2.0 m/s) varying according a second order central composite design. The Williams-Landel-Ferry model was satisfactorily adjusted to degradation curves for both control strategies adopted—constant air temperature and temperature fixed inside the fruit. Degradation rates were higher at higher drying temperatures, independent of the necessary time to attain the desired moisture content.     

Atomic force microscopic analysis of hydrogen peroxide bleached kraft northern black spruce fibres

Hydrogen peroxide is a potent, relatively inexpensive oxidant that chemically degrades chromophoric components in pulps and textiles. Oxidation of cellulose is a byproduct of this process step that decreases the tensile strength of individual fibres. The residence time of pulp in the bleaching reactor must be optimized to achieve the desired brightness and minimizing fibre degradation. To evaluate the impact of peroxide bleaching at the microfibrillar level, a single black spruce tree was chosen and kraft pulped. Peroxide bleaching was conducted via benchtop polyethylene bag bleaching in a temperature-controlled waterbath. Atomic force microscopy (AFM) topographical images acquired before and after the bleaching step show dramatic changes in fibre structure consistent with delignification and defects in the surface topography. This was further verified by X-ray work at Brookhaven National Laboratory, NY, U.S.A.     

Dielectric behaviour of glasses and glass ceramics in the system BaO-PbO-TiO2-B2O3-SiO2

Glasses with varying molar ratios of PbO/BaO in the system BaO-PbO-TiO₂-B₂O₃-SiO₂ were prepared keeping (BaO + PbO)/TiO₂ ratio equal to one. The glasses were ceramized by two-stage heat treatment. X-ray diffraction indicates that PbTiO₃ crystallizes in lead-rich glasses while BaTiO₃ precipitates in barium-rich compositions. Solid solution (Ba, Pb)TiO₃ does not seem to crystallize over the entire range of compositions. Simultaneous presence of PbO and BaO in the initial glass composition reduces the yield of ferroelectric phase. Dielectric properties have been interpreted in terms of microstructural features.     

A scheduling decision aid in glass fiber manufacturing

A decision aid for scheduling production in glass fiber manufacturing industry is described. The methodology combines a linear programming (LP) optimization model with a heuristic model. The LP model determines production goals; the heuristic model then uses the LP output to incorporate system-specific constraints in developing processing sequences.     

Surface treatment for adhesive-bonded joints by excimer laser

In this work a treatment for surface preparation to improve mechanical resistance in adhesive bonding of plastic composites reinforced with fibres and metallic material, has been performed using an excimer laser. The following couplings have been selected to reproduce joints commonly used in the aerospace and automotive industry: CFC (carbon fibre composite) with CFC, CFC with Al 2024T3, Al 99% with Al 99%, GFC (glass fibre composite) with zinc-coated sheet in low carbon steel FeP01. The surfaces have been prepared using an excimer laser, adopting several values of laser parameters. The obtained surfaces have been examined by optical and scanning electron microscope: comparative measures of wetting and roughness have been performed to obtain an accurate characterisation and to select the proper finishes suitable to improve the mechanical resistance of the joints. The results obtained show that laser treatment always improves the final resistance of the joint; notable increases, and no significant surface damages have been highlighted. Better results have been obtained with the Al 99% with Al 99% joints which, with a low number of pulses treatment, have shown an increase of mechanical resistance up to the 70%.     

丝绸之路与中国早期玻璃艺术

我国在商、周之交,就开始了早期的中西交流,而张骞西行后又开辟了新的中外来往的交通路线。我国的玻璃业尽管没能发展为重要的手工业门类,但它始终在持续而缓慢的发展,更重要的是,正是由于玻璃业的非主流,在发展过程中凸显了外部因素的重要性。丝绸之路在中国古代玻璃艺术的发展过程中起到了重要作用。