Process heat integration of a heavy crude hydrotreatment plant

The present paper focuses on the study of process alternatives for heat integration of a heavy crude oil hydrotreatment plant. Experimental information obtained from a pilot scale, kinetics and reactor modeling tools, and a commercial process simulator were employed to develop mass and energy balances. Four study cases, which employ a combination of quenching and heat exchangers, were identified and evaluated. The results indicated that the case with two quenches with hydrogen and three heat exchangers is the best process heat integration (PHI) option from an energetic point of view.     

Onr-partition designs in hamming spaces

The concept of the combinatorial matrix of an unrestricted code and the notion of anr-partition design admitted by a code are introduced and discussed in detail. The theory includes a characterization of completely regular codes, and a combinatorial interpretation of the fact that the distinct rows of the distance distribution matrix of a code are linearly independent. In general, it is possible to compute the distance distribution matrix of any code admitting a given partition design by solving a well-defined system of linear equations; this is an efficient technique provided the number of classes in the partition is relatively small.     

估计小波系数方差邻域大小的研究

利用小波变换去噪时小波系数方差的估计对去噪结果影响很大。自然图像小波分解后得到的系数在不同的分辨率中差异很大,所以利用邻域估计中心点方差时,不同分辨率应有不同大小的邻域。首先对在邻域中利用极大似然准则估计中心点方差进行分析,再结合自然图像小波分解后的系数在不同分辨率子带中,根据平稳性和重要性选择邻域的大小。最后进行去噪实验,并取得正交小波分解下理想的去噪性能。     

Thermal Generation of Residual Stress Fields for Purpose of Distortion Minimization

Thermal treatments of steel components with the goal of hardening often result in distortion by releasing the residual stresses which were brought into the specimen during the preceding processing steps. The goal of the presented work is the minimization of this distortion. By generating definite residual stress fields and investigating the resulting distortion, the distortion mechanism can be observed in detail. A flexible and reproducible way to generate such residual stress fields inside a specimen is by means of local thermal treatment with a laser beam. Computer simulations as well as experiments were carried out using an idealized tooth of a gearwheel (finger sample) as a model system. The deformation of the samples due to the laser heat treatment and the stress fields generated inside the samples were determined with respect to different process parameters.     

RESEARCH ON DESIGN METHOD OF A MULTIPLE DISC WET BRAKE IN LUBRICATED ENVIRONMENT

The rmomechnical phenomena occurring between friction pairs greatly change the distributions oflining pressure and friction surface temperature of a multiple disc wet brake. It has become one of the maincauses of brake failure. In order to understand these thermomechanical phenomena, several design and mate-rial factors tha have great influence on thermomechanical phenomena, such as heat transfer coefficient, fric-tion factor, sliding velocity initial lining pressure and so on, are analyzed. An isothermal design method isproposed for designing a multiple disc wet brake.     

Microstructural change of ultrafine-grained aluminum during high-speed plastic deformation

Effect of strain rate on microstructural change in deformation of the ultrafine grained (UFG) aluminum produced by severe plastic deformation (SPD) was studied. Commercial purity 1100 aluminum sheets were highly strained up to an equivalent strain of 4.8 by the Accumulative Roll-Bonding (ARB) process at ambient temperature. The ARB-processed sheets were found to be filled with pancake-shaped ultrafine grains surrounded by high-angle grain boundaries. The ultrafine grains had a mean grain thickness of 200 nm and a mean grain length of 1100 nm. The ultrafine-grained aluminum sheets were deformed at various strain rates ranging from 2 to 6.0×10⁴ s⁻¹ by conventional rolling, ultra-high-speed rolling, and impact compression. High-speed plastic deformation generates a large amount of heat, inducing coarsening of the ultrafine grains during and after deformation. On the other hand, it was also suggested that high-speed plastic deformation is effective for grain-subdivision, in other words, ultra-grain refinement, if the effect of heat generation is extracted.     

Heat transfer and flow of He II in narrow channels

Heat transfer and fluid flow of He II in a long, narrow channel connected to a bath that supplies a constant supply of heat have been investigated by numerical simulations by using the simplified model of Kitamura et al. [Cryogenics 37 (1) (1997) 1]. Such channels are used to cool compact, stable, low-temperature magnets. The fluid flow is driven by natural convection and the mutual friction between the normal fluid and the superfluid.In this model, the thermomechanical effect and the Goter-Mellink mutual friction balance each other. A consequence of this balance is that the velocity and temperature distributions of He II can be characterized by a dimensionless, dependent parameter equal to the ratio of the fluid speeds of internal convection to the total fluid flow. After a sudden application of heat flux, the internal convection dominates over the total fluid flow until the establishment of steady-state temperature gradients. This predicts that the time required to set up the steady-state total fluid flow is proportional to the total heat capacity in the channel.     

Restricted overlapping balancing domain decomposition methods and restricted coarse problems for the Helmholtz problem

Overlapping balancing domain decomposition methods and their combination with restricted additive Schwarz methods are proposed for the Helmholtz equation. These new methods also extend previous work on non-overlapping balancing domain decomposition methods toward simplifying their coarse problems and local solvers. They also extend restricted Schwarz methods, originally designed to overlapping domain decomposition and Dirichlet local solvers, to the case of non-overlapping domain decomposition and/or Neumann and Sommerfeld local solvers. Finally, we introduce coarse spaces based on partitions of unity and planes waves, and show how oblique projection coarse problems can be designed from restricted additive Schwarz methods. Numerical tests are presented.     

现场总线技术的特点及其在热电站的应用

阐述了现场总线技术的含义、主要特点和优点,对比了现场总线控制系统与DCS系统的区别,介绍了现场总线技术在洛阳石化分公司热电站的典型应用及其发展前景。     

��Ȼ��ѹ�����ӵļ������������

对三种天然气压缩因子计算方法：经典热力学法、SGERG-88法、SY／T6143—1996法进行了介绍并对计算结果进行了对比，第一种方法的计算精度远不能满足贸易结算的要求，我国现行的第二种计算方法与ISO标准方法相比，在10℃以上的温度范围内基本相符，但在10℃以下的低温段则偏差较大。由此说明，我国目前所实施的计量标准与国际上认可的ISO标准方法之间有较大的偏差；同时，对不需要在线计算的场合，提出了一套基于数据拟合的计算体积修正系数的高精度近似方法，可提高体积计量仪表的性价比。