非调质钢的合金设计与热加工工艺及性能

论述了非调质钢的性能特点，分析了V、Nb、Ti、Mn、Cr、Si等常用合金元素对非调质钢组织和力学性能的影响，并对热加工工艺、热处理等因素个性能的影响作了分析和讨论。     

堆焊技术在板带热连轧机支承辊上的应用

本文介绍堆焊技术在热连轧机支承辊再利用方面的试验和应用,叙述了堆焊材料的选择,堆焊工艺以及取得的效果和经济效益。     

B 炸药中绝热剪切带形成机理的细观研究

通过对快速加载后Ｃｏｍｐ．药柱剖面的扫描电镜和光学显微镜观察分析，对Ｃｏｍｐ．Ｂ炸药在快速加载下剪切带形成机理的微观机制有了初步的认识。文中采用形变试样的剖面观察分析方法，针对固体药柱这种比较软的材料，如何进行磨样、抛光、浸蚀，作了一些尝试和探索，总结出一套有效的实施办法。对不同加载速率条件下受压缩的药柱中细观组织进行了观察、分析、比较，首次给出国产Ｃｏｍｐ．Ｂ炸药装药的原始细观组织形貌，以及快速加载后药柱中细观组织形貌。经过分析，得到冲击载荷下炸药装药中绝热剪切带形成、发展的定性认识，为分析Ｃｏｍｐ．Ｂ炸药装药受冲击载荷时热点形成机理提供了一些有益的实验依据。     

BOPP珠光膜及其生产工艺

详细介绍了BOPP珠光膜的特性和生产工艺,特别指出了BOPP珠光膜生产中的难点和排除方法,对实际生产有相当的价值.     

Artificial neural network application for modeling the rail rolling process

Rail rolling process is one of the most complicated hot rolling processes. Evaluating the effects of parametric values on this complex process is only possible through modeling. In this study, the production parameters of different types of rails in the rail rolling processes were modeled with an artificial neural network (ANN), and it was aimed to obtain optimum parameter values for a different type of rail. For this purpose, the data from the Rail and Profile Rolling Mill in Kardemir Iron & Steel Works Co. (Karabük, Turkey) were used. BD1, BD2, and Tandem are three main parts of the rolling mill, and in order to obtain the force values of the 49 kg/m rail in each pass for the BD1 and BD2 sections, the force and torque values for the Tandem section, parameter values of 60, 54, 46, and 33 kg/m type rails were used. Comparing the results obtained from the ANN model and the actual field data demonstrated that force and torque values were obtained with acceptable error rates. The results of the present study demonstrated that ANN is an effective and reliable method to acquire data required for producing a new rail, and concerning the rail production process, it provides a productive way for accurate and fast decision making.     

Cu2O-CuAlO2-Cu基金属陶瓷导电性能研究

通过热压技术制备Cu2O-10CuAlO2-xCu金属陶瓷材料，并对其导电性能进行了研究。结果表明，Cu2O-10CuAlO2-xCu在Cu含量超过15wt．％后呈金属导电性。材料的微观结构观察及物理性能测试表明，金属陶瓷材料的电导率不仅取决于材料的金属相含量，还取决于金属相颗粒尺寸和孔隙率的大小。材料中金属相的颗粒尺寸取决于热压工艺参数，随着热压温度的升高而增大，但随热压压力的升高而减小。     

Self-propagating high-temperature synthesis of advanced ceramics MoSi2–HfB2–MoB

This study focuses on the investigation of the macrokinetic features of SHS (combustion synthesis) of elemental mixtures Mo–Hf–Si–B, in particular the mechanisms of structure and phase formation in the combustion front as well as the structure and properties of consolidated ceramics. Two routes for the fabrication of the composite SHS powder in system MoSi₂–HfB₂–MoB were used: (1) synthesis using Mo–Si–B and Hf–B mixtures followed by mixing of the combustion products and (2) synthesis using the four-component Mo–Hf–Si–B mixture. Dense ceramic samples with a homogeneous structure and low residual porosity (0.8–3.6%) were prepared by hot pressing of SHS powders. Although the particles size distribution and phase composition of SHS powders are similar for both synthesis routes, the structure and properties of both the composite SHS powders and hot-pressed ceramics differ considerably. Synthesis using the four-component Mo–Hf–Si–B mixture allows one to produce hierarchically ordered nanocomposite material with improved mechanical properties: hardness up to 17.6?GPa and fracture toughness up to 7.16?MPa?m^1/2.     

Resistance to sulfur poisoning of hot gas cleaning catalysts for the removal of tar from the pyrolysis of cedar wood

In the partial oxidation of tar derived from the pyrolysis of cedar wood, the effect of H₂S addition was investigated over non-catalyst, steam reforming Ni catalyst, and Rh/CeO₂/SiO₂ using a fluidized bed reactor. In the non-catalytic gasification, the product distribution was not influenced by the presence of H₂S. Steam reforming Ni catalyst was effective for the tar removal without H₂S addition, however, the addition of H₂S deactivated drastically. In contrast, Rh/CeO₂/SiO₂ exhibited higher and more stable activity than the Ni catalyst even under the presence of high concentration of H₂S (280 ppm). On the Ni catalyst, the adsorption of sulfur was observed by XPS and Ni species was oxidized during the partial oxidation of tar. In the case of Rh/CeO₂/SiO₂, the adsorption of sulfur was below the detection limit of XPS. This can be related to the self-cleaning of catalyst surface during the circulation in the fluidized bed reactor for the partial oxidation of tar derived from cedar pyrolysis.     

支持依赖修复的热部署技术

热部署机制是主流应用服务器的典型功能之一。但是目前的应用服务器仅仅支持独立应用的热部署,并不能满足具有依赖注入的复杂企业级应用在线更新的需求。如果在线更新部分模块,会出现程序调用失效的问题,并会导致整个应用平台的失效。为了解决这个问题,介绍一种支持依赖修复的热部署技术。在首次部署应用的各模块时,用该技术建立模块之间的依赖关系。而在其更新时,通过查找依赖关系,找出受到更新影响的模块,修复依赖并进行局部的热部署,避免重启应用服务器的代价。最后通过实验表明,该热部署技术可以保证依赖注入下的应用正确性;在实际工程应用的场景下,该技术也能够大幅度提升应用服务器的性能和运行效率。     

无线通信技术的热点及发展趋向探析

随着经济的发展和社会的进步,特别是随着信息化时代的到来,人们对无线通信工具的应用已经达到了一个新的层次.从国内外的发展历程和现状看,无线通信领域在当前具有两个最突出的特点：一是无线通信的用户数量虽然在各个国家和地区呈现出不均衡的状态,但是总体上仍然保持着强劲的增长趋势;二是这一领域的技术热点层出不穷,在科学研究和应用中都保持了非常活跃的姿态.本文通过对当前几种热点技术的介绍进一步探析无线通信技术的发展趋向.