双极性步进电机细分驱动器的设计与实现

论述了一种双极性步进电动机驱动器的工作原理，该驱动器能较好地改善步进电动机的运行性能，具有实用性强，结构简单，成本低的优点。针对实际调试中出现的问题进行分析后，提出了对策；最后给出了试验结果。     

半导体浪涌保护器基区参数探讨

讨论了半导体浪涌保护器件的基区宽度，着重分析了基区宽度与开通电压、静电电容、浪涌能力的关系，指出控制基区宽度，可有效地提高器件的浪涌能力，降低静电电容和开通电压     

Time series analysis of wind speed using VAR and the generalized impulse response technique

This research examines the interdependence in time series wind speed data measured in the same location at four different heights. A multiple-equation system known as a vector autoregression is proposed for characterizing the time series dynamics of wind. Additionally, the recently developed method of generalized impulse response analysis provides insight into the cross-effects of the wind series and their responses to shocks. Findings are based on analysis of contemporaneous wind speed time histories taken at 13, 33, 70 and 160 ft above ground level with a sampling rate of 10 Hz. The results indicate that wind speeds measured at 70 ft was the most variable. Further, the turbulence persisted longer at the 70-ft measurement than at the other heights. The greatest interdependence is observed at 13 ft. Gusts at 160 ft led to the greatest persistence to an “own” shock and led to greatest persistence in the responses of the other wind series.     

GCK－Ⅱ光电测宽仪──用CCD改造引进的二手测宽仪

本文介绍了用电荷耦合器件（ＣＣＤ）改造引进的日本二手测宽仪，并已用于太钢热连轧生产现场，取得了良好的应用效果。     

基于柔性阵列传感器的脉象检测系统的设计

当前的脉象仪大部分采集手段单一,取脉压力的调节性差,无法模拟医生的布指方式,而且只能实现脉搏图的描记及分析,无法给出脉象的三维信息。针对这一问题研制了基于柔性阵列传感器的脉象检测系统,用硅胶制作了专门的脉搏换能器;设计了压力控制系统,实现压力自动调节,完成了对最佳取脉压力下脉象的采集;搭建了信号处理电路,实现了对脉象信号的提取和预处理;以USB-7660为核心构建了A/D采集系统,实现了对多路脉象信号的显示、存储。实验表明,该系统不仅可以有效采集到受试者的七路二维脉图,而且能清晰地观测到受试者的脉道宽度,并重建出相应脉搏波的三维传导地形图。     

视觉测量中多光学靶点亮度自适应控制

提出了一种面向大视场高精度视觉测量的多红外目标靶点（红外LED）亮度自适应控制方法。以微控制器PIC16F873A和LED驱动芯片MAX6964作为核心器件,设计了可满足大空间范围内靶点亮度控制需求的多目标靶点控制驱动器。为了使LED在近距测量时的调节精度和远近距离测量时的发光亮度都能满足要求,根据MAX6964输出特点设计了PWM信号输出电路,并采用推挽电路驱动LED。实验证明,目标靶点在CCD相机上成像光斑稳定一致。     

A preliminary study of a diagonal channel-routing model

The layout of two-terminal nets in a VLSI channel is realized in a new diagonal channel-routing model (DCRM), where the tracks are segments respectively displayed at +45 ° and –45 ° on the two layers of the channel. A new definition of channel density is introduced, and a lower bound to the channel width is derived by the application of an algorithm, whose complexity is evaluated as a function of the channel density, and other parameters of the problem.A simple linear-time algorithm is proposed, which produces an optimal layout (i.e., it requires a channel of minimum width) if the length of the longest net equals the lower bound for the channel width. In any case, the number of vias is at most one for each net. Some particular solutions are proposed for problems with long nets.Specific problems are much easier in DCRM than in the classical Manhattan model. For example, any shift-by-i can be realized in DCRM in a channel of widthi.This work has been supported by Consiglio Nazionale delle Ricerche of Italy under a research grant.     

相关函数脉冲响应法系统实时辨识

结合了相关函数法和脉冲响应法两种经典系统辨识方法原理,在随机信号干扰的情况下,设计对系统实现实时辨识的仿真软件,获得系统的非参数模型。该仿真设计中,以M序列作为输入信号,白噪声信号作为干扰信号,进行了Matlab仿真实验,讨论了M序列的幅值,采样时间和周期长度对系统辨识效果的影响,以及分析M序列的选取方法来减少系统辨识误差。     

电能变换领域中随机脉宽调制技术研究概况及展望

相较于传统的脉宽调制技术,随机脉宽调制具备有效的谐波频谱分散能力,从而实现机电负载噪声的削弱。随机脉宽调制技术包括起步的随机开关调制、后续的随机脉冲位置与随机开关频率等3个基本方法。随着电力电子技术的整体发展,随机脉宽调制已从传统的载波调制逐渐拓展到空间矢量调制之中,应用范围日趋广泛,谐波频谱分散与功率谱峰值抑制的效果不断提升。同时,新的优化方案不断被提出,对谐波频谱及功率谱的分散效果亦在不断提高。梳理了随机脉宽调制的研究历程,总结了数种典型的随机脉宽调制的基本原理,并对未来随机脉宽调制的研究方向作出展望,为随机脉宽调制技术的深入研究提供参考。     

在线监测结晶器调宽换向阀阀芯卡阻方法的实现

对某炼钢厂铸机结晶器在线调宽液压系统的工作原理进行了分析,并重点分析了调宽过程中换向阀阀芯卡阻的问题,针对该问题对其液压系统进行了改进,改进后可以在线监测换向阀阀芯是否卡阻。该改进的实施在减少结晶器在线调宽时发生漏钢故障方面起到了重要作用。