测量生产井含水率的一种新方法：—屏蔽式感应法

提出了利用屏蔽式感应线圈测量生产井中油水混合物的混合电导率进而推断含水率的方案,并用几何因子理论对仪器设计参数范围进行了估算。结果表明,使用1～5MHz的工作频率,二次场感应信号可达到μV数量级。从原理上看,该方案能测量高含水率的油水混合物,并且不受金属套管的影响。     

最大熵在感应测井反演中的应用

常规的反演方法是对感应测井资料进行线性反褶积。由于感应测并获得的响应曲线是地层非线性时变滤波的结果,感应测井响应随地层电导率发生非线性变化。本文把熵的概念引入到感应测井反演中。用最大熵方法分别设计出实部信号和虚部信号所对应的反滤波因子,两条反映测井响应随电导率非线性变化的非线性函数也被拟合出来。文章最后用设计出的滤波因子及被拟合出的非线性函数对模拟相量感应测井资料进行了相量反褶积。处理结果表明,围岩效应和趋肤效应基本被消除。本方法与常规的三点反褶积法相比,克服了过聚焦现象,提高了精度。     

会计信息失真现象的博弈分析

在对现实进行合理假定的基础上建立了会计信息失真现象的有限完美信息动态博弈模型，并利用后退归纳法找到了五个满足不同条件的纳什均衡解。通过对均衡条件的分析，找出了导致会计信息失真的治理结构原因和法律制度因素，并提出了建设性的解决措施。     

Computer modeling of the continuous annealing furnace

A computer program to calculate the strip temperature heated in the continuous annealing furnace was developed, using the zone method for radiative heat transfer analysis with the measured gas temperature in the furnace. Using theF _E Operator, the present study considered the effects of soot and transient species, in addition to the H₂O−CO₂ gas mixture on the gas radiative heat transfer. The predicted strip temperature distribution forF _E=1.05 represented well the measured data. The maximum difference in the heat flux transfered to the strip from the combustion gas forF _E=1.0 (without soot and transient species gas radiation) and 1.05 (with soot and transient species gas radiation) was about 15%. The present study also investigated the effects of line speed and thickness variations on the strip temperature, establishing the bases for the on-line computer model.     

浅谈变频器供电条件下电动机的温升与对策

随着变频调速技术的蓬勃发展，变频器供电电机的温升问题已引起人们的广泛关注。本文首先讨论了电动机的温升限度；然后结合感应电机温升实验的相关数据分析了变频器供电对电动机温升的影响及其原因；最后从降低发热量和提高散热能力两方面提出缓解电机温升的措施，并指出了实际应用中应注意的问题。     

非织造布印花技术探讨

介绍了应用于非织造布印花的技术及工艺，对非织造布印花时应注意的事项进行了说明。     

Relation between microstructure, properties and spark plasma sintering (SPS) parameters of pure ultrafine WC powder

A combined experimental/numerical methodology is developed to fully consolidate pure ultrafine WC powder under a current-control mode. Three applied currents, 1900, 2100 and 2700 A, and a constant pressure of 20 MPa were employed as process conditions. The developed spark plasma sintering (SPS) finite-element model includes a moving-mesh technique to account for the contact resistance change due to sintering shrinkage and punch sliding. The effects of the heating rate on the microstructure and hardness were investigated in detail along the sample radius from both experimental and modeling points of view. The maximum hardness (2700 HV10) was achieved for a current of 1900 A at the core sample, while the maximum densification was achieved for 2100 and 2700 A. A direct relationship between the compact microstructure and both the sintering temperature and the heating rate was established.     

Estimation of thermal diffusivity of foods using transfer functions

The effective thermal diffusivity of foodstuffs was estimated from time-temperature histories in the geometric center of samples exposed to heating and cooling processes.Transfer functions methodology was used as an alternative method to estimate the thermal diffusivity assuming that conduction was the main heat transfer mechanism. The samples were characterized as delayed first-order systems with unit gain, dead time (L) and time constant (τ).The results were compared with those obtained from the f_h value and with results reported in the literature.     

用发生炉煤气进行快速热风烤窑的应用

用发生炉煤气进行快速热风烤窑的应用王善波，王志军（山东荣成市玻搪工程有限公司２６４３０９）ＰｒｏｄｕｃｅｒＧａｓＵｓｅｄｆｏｒＦａｓｔＨｅａｔｉｎｇｕｐＴａｎｋＦｕｒｎａｃｅ￥ＷａｎｇＳｈａｎｂｏ；ＷａｎｇＺｈｉｊｕｎ（ＳｈａｎｄｏｎｇＲｏｎｇｃｈｅ...     

感应电动机转速对定子电流暂态过程的影响

本文运用根轨迹法，分析了感应电动机转速对定子电流暂态过程的影响。并通过对稳态时定子电流在电压阶跃干扰下的暂太响应分析，验证了结论有效性。