齿轮减速器造型设计与模态分析

讨论复杂结构的建模方法,建立齿轮减速器三维实体模型并进一步建立了齿轮减速器的三维有限元模型,分析系统的固有特性,从而获得了设计所需的必要数据。     

非标准工况下空分设备增产氩的研究与实践

文章对非标准工况下的空分设备增产氩措施进行了研究。以宝钢6#60000m3/h空分设备为例,通过设计型算法和校核型算法,建立了空分设备精馏的数学模型,通过改变数学模型的参数,分析了在非标准工况下精馏塔内的组分浓度分布,并提出了优化后的操作方案和操作参数,实施后提高了空分设备的氩提取率,取得了显著的经济效益。     

40000m~3/h空分设备主换热器的设计及制造

通过对进口 4 0 0 0 0m3 /h空分设备主换热器进行结构分析及对比模拟计算 ,用国产传热翅片进行设计、采用真空钎焊工艺制造的主换热器 ,经并网运行 ,设计指标优于原空分设备 ,为今后成套大型空分设备板翅式换热器国产化设计、制造创造了条件。     

大型居住区设计探索——“深圳市新亚洲花园”设计回顾

通过对大型住宅区“深圳市新亚洲花园”工程规划及建筑方案创作构思的分析,实现住宅提升人们生活品质的设计思想,同时,在规划设计上对住宅开发在经济市场上如何提升竞争力做了有益探索。     

大型空分设备循环冷却水处理方法的对比研究

武钢氧气公司在大型空分设备循环冷却水系统中,采用化学法和物理法进行水处理效果的实践探索,从原理和监测数据上进行了对比、分析研究,确认物理法具有高效除垢、防垢、杀菌灭藻、缓蚀以及净化等功能,可以取代化学法进行循环水处理。     

空分设备的氪氙预浓缩技术

大型空分设备的工艺流程不同，采取的氪、氙预浓缩技术也不同。介绍了适用于不同流程的从液氧中提取氪-氙浓缩物和从富氧液空中提取氪-氙浓缩物的氪、氙预浓缩工艺原理、技术参数和特点。     

用高分子复合材料修复轧管机组大型构件

介绍采用高分子复合材料修复用于钢管生产的轧管机组大型构件的方法。重点介绍机架轴承座孔的修复工艺流程 ,修复定位 ,技术操作要点及修复效果。     

A study of the large strain deformation and failure behaviour of mixed biopolymer gels via in situ ESEM

A mixed biopolymer gel, consisting of a protein (gelatin) and polysaccharide (maltodextrin) mixture has been investigated. By controlling the composition it was possible to construct an ‘emulsion-like’ structure, with included spherical particles of one phase (maltodextrin) within a continuous matrix of the second (gelatin). Large strain deformation and failure behaviour of this system has been examined via in situ environmental scanning electron microscopy (ESEM). ESEM has been employed to explore the changes in the structure of the material, whilst allowing the sample to stay hydrated as it was subjected to tensile strain, thereby allowing simultaneous imaging and determination of stress-strain data of the native sample. Ductile behaviour was observed, which has been attributed to the stretching, tearing and fracture of gelatin ligaments and debonding at the interface between the maltodextrin particles and continuous gelatin matrix. Deformation and fracture of the maltodextrin particles during tensile testing was also observed. The interfacial fracture energy of the composite has been calculated following an elastomer composite-debonding model, although there are several limitations to this approach for the mixed gel. It was found in samples tested after different ageing times that the debonding stress and strain was decreasing with ageing leading to a lower interfacial fracture energy. Samples were also tested after successive loading cycles, which resulted in a mechanical strength decrease after each cycle.     

BYJ型防喷脱接器的设计与应用

本文介绍了BYJ型防喷脱接器的结构和工作原理。它既有抽油杆与大泵活塞脱接功能,又能实现不压井作业施工,是大型抽油泵理想的配套工具。现场应用表明,该防喷脱接器对接成功率较高,并实现了大泵井不压井施工。     

Graph‐Theory Approach to Eigenvalue Problem of Large Space Structures

The dynamic analysis and control system design of large space structures involve the solution of the large‐dimensional generalized matrix eigenvalue problem. The computational effort involved is proportional to the third power of the dimension of the matrices involved. To minimize the computational time a graph‐theory approach to reduce a matrix to lower‐ordered submatrices is proposed. The matrix‐reduction algorithm uses the Boolean matrices corresponding to the original numerical matrices and, thus, the computational effort to reduce the original matrix is nominal. The computational savings directly depend upon the number of submatrices into which the original matrix is reduced. A free‐free square plate is considered as an example to illustrate the technique. In this example a matrix of 16th order is reduced to three scalars corresponding to three rigid‐body modes, and three matrices of order three and one matrix of order four.