LASER ENHANCED ELECTROCHEMICAL MACHINING PROCESS

An experimental apparatus was designed and built for the hybrid process of laser enhanced electrochemical machining (ECM). Comparison experiments had been done between solely ECM and laser enhanced ECM. The machining performance of hybrid process was investigated and compared with solely ECM. The principle of the hybrid process was exposed by analyzing the microstructure of machining surface. The results show that the hybrid process has advantages in machining accuracy, surface quality, and machining efficiency.     

激光起爆与点火系统中光纤连接器

介绍了激光起爆与点火系统中光纤连接器的原理、种类、技术特性及损耗，并对激光起爆与点火系统中光纤连接器的研制动向进行了概括，最后得出一些结论。     

Effect of C/Ti ratio on the laser ignited self-propagating high-temperature synthesis reaction of Al-Ti-C system for fabricating TiC/Al composites

TiC/Al composite was successfully synthesized utilizing laser ignited self-propagating high-temperature synthesis (SHS) of Al-C-Ti system with the different C/Ti molar ratio. When the molar ratio of C to Ti is below 1:1 in the starting materials, in addition to fine TiC particulates, a large amount of Al₃Ti phase was found in the composites; however, when the molar ratio of C to Ti is 1:1 in the starting materials, the Al₃Ti phase was almost completely eliminated and the distribution of TiC particulates generally appeared to be more homogeneous throughout the products synthesized.     

曲轴激光喷丸强化试验研究

采用实验的方法,研究了激光冲击强化对175A型柴油机曲轴疲劳寿命的影响,取得了激光冲击强化试验条件下曲轴过渡圆角处残余应力场的数据。并将激光冲击强化工艺效果和曲轴滚压强化效果做了对比性分析,结果表明：虽然激光冲击强化效果不如曲轴滚压强化,但考虑到激光工艺参数精确可控、加工质量好、成本低以及可避免滚压强化所造成的表面疲劳、撕痕等,激光冲击强化工艺可望代替滚压强化成为新型的曲轴强化手段。通过此类激光冲击强化强化实验可优化激光冲击的相关参数,使曲轴过渡圆角产生有利的残余应力场。     

一种激光测厚装置

介绍一种新型激光测厚装置 ,描述了它的结构框架及工作过程     

Experimental results of a low-power roadheader driving a gallery with different types of rock at the face

In this paper, the experimental results of a 45-kW and 15-t roadheader excavating a gallery with two different types of rock at the face using two different cutting heads are shown. It is proved that the roadheader works properly with both cutting heads. In comparison with other results in the literature, the principal parameters, i.e. specific energy, cutting rate and tool wear, are at a level that can be considered satisfactory taking into account the low power of the roadheader. On the other hand, the influence of the number of picks, which is the main difference between the two cutting heads, on the operational parameters is shown.     

耦合腔激光器的波长调谐与频率调制特性分析

考虑用激光器与调制器直接耦合以及耦合槽的影响，用散射矩阵法及二步等效反射率法，对沟槽耦合腔激光器的波长调谐和频率调制特性的分析表明，数学处理简单，物理图像清晰。     

激光微焊接质量的模糊识别技术研究

讨论了激光微焊点焊接质量的模糊识别的概念，数学模型及其应用方法，并介绍了系统的硬件组成。     

Electron acceleration by single and double laser beams

The longitudinal electric field of single and double Gaussian laser beams are used to accelerate electrons. The longitudinal field of the single beam is concentrated on the axis and is favourable for acceleration. A set of two beams is considered. Beams run parallel, collinearly, overlap partially and have a phase difference iπ in between. As a result, the transverse components of fields cancel each other while the longitudinal components are double-fold. In both schemes, the electrons are accelerated in lengths of the Rayleigh range, which is common to the plasma-based accelerators.     

混合集成电路激光功能调值技术

本文提出了激光功能微调技术在高精度混合集成电路上的应用，讨论了关键技术问题，并以实例具体说明。该技术的应用为研制高精度混合集成电路开辟了新途径。