激光微焊接质量的模糊识别技术研究

讨论了激光微焊点焊接质量的模糊识别的概念，数学模型及其应用方法，并介绍了系统的硬件组成。     

Electron acceleration by single and double laser beams

The longitudinal electric field of single and double Gaussian laser beams are used to accelerate electrons. The longitudinal field of the single beam is concentrated on the axis and is favourable for acceleration. A set of two beams is considered. Beams run parallel, collinearly, overlap partially and have a phase difference iπ in between. As a result, the transverse components of fields cancel each other while the longitudinal components are double-fold. In both schemes, the electrons are accelerated in lengths of the Rayleigh range, which is common to the plasma-based accelerators.     

连续输出20WAlGaAs／GaAs量子阱激光二极管线列阵

采用ＭＯＣＶＤ实现了ＡｌＧａＡｓ／ＧａＡｓ量子阱结构，获得了连续输出２０Ｗ激光二极管线列阵，线列阵长度１．０ｃｍ，激射波长８０８±４ｎｍ。     

混合集成电路激光功能调值技术

本文提出了激光功能微调技术在高精度混合集成电路上的应用，讨论了关键技术问题，并以实例具体说明。该技术的应用为研制高精度混合集成电路开辟了新途径。     

Studies on Three—electrode Semiconductor Lasers

Using the ray trace method,three-section semiconductor lasers are studied .An analytic expression of output power for the three-section semiconductor lasers is derived for the first time.Frome this expression,threshold condition is also obtained.     

新型蓝绿发光材料ZnSe／BeTe超晶格的能带剪裁

由于器件的快速退化，101.5小时似乎成了Znse基蓝绿色半导体激光器难于逾越的寿命极限。分析退化机制，发现在强电流注入的半导体激光器中，热退化具有重要影响。研究表明，用作载流子限制层的宽带Ⅱ-Ⅵ族四元合金（如ZnMgSSe）只能对ZnSe中的电子有效地限制，无法对空穴很好地限制;而对BeTe，却只能对空穴进行有效的限制，无法对电子很好地限制。这导致ZnSe（或BeTe）活性层空穴（或电子）漏电发热，引起退化。本文提出以ZnSe／BeTe超晶格为蓝绿发光层，并用包络函数理论具体计算了阱宽、垒宽对载流子能级的不同影响，考察了ZnSe、BeTe厚度比和超晶格周期对带隙、载流子限制能力的调节。为研制新型长寿命蓝绿色半导体激光器提供了一条新的途径。     

超辐射发光二极管的结构特性及其应用

近几年来,由于超辐射发光二极管在光纤陀螺和光时域反射仪等方面的重要应用,已引起了人们的极大关注,许多国家都在竞相研制和开发.本文综述了目前超辐射发光二极管的主要结构和特性及其应用前景.     

1477 nm LD泵浦掺铒光纤放大器的研究

报道了采用１４７７ｎｍ激光二极管（ＬＤ）泵浦的掺铒光纤放大器的实验结果。研究了放大器的增益和时域特性。对１５２０ｎｍ的信号光，获得了２３ｄＢ的增益，泵浦效率为２．２８ｄＢ／ｍＷ。低频脉冲信号经过放大器后未发生波形畸变。     

Early detection of ageing in solder joints through laser probe thermal analysis of the peltier effect

We have recently developed an optical contactless method for testing the quality of solder joints during accelerated thermal cycling ageing processes.¹ The method was based upon the measurement of the dynamic thermal behaviour of the joint to short bursts of Joule heating. It has proved to be efficient in revealing the formation of cracks at the lead-solder interface. We present a method to evaluate ageing at a much earlier stage in the cycling process. We have observed in earlier work,¹ that before cracks appear, structural changes occur in the solder at the lead-solder interface. The thermal response of the solder joint is recorded over time to a Peltier heat perturbation produced by flowing a current pulse through the interface where structural changes occur. The key point in this method is to discriminate the Peltier effect from the Joule thermal response because both effects generate heat. The variation of the early Peltier response in the thermal cycling ageing tests is seen as a quantitative signature of the structural changes in the lead-solder interface.     

轴端沟槽底部激光强化工艺参数优化研究

分析了选用不同激光能量密度对HT300进行表面强化处理时，材料表面呈现的四种状况；未相变硬化、相变硬化、表面微熔与表面熔凝的金相组织。根据工艺要求，选取相变硬化方法对轴端沟槽底表面进行处理。分析了工件激光处理方法并通过试验研究，寻找轴端沟槽底部激光强化工艺参数；激光功率（P）、光斑直径（D）及扫描速度（V）的优化组合。硬度测试及耐磨性能试验表明：激光相变处理和激光熔凝处理后轴端沟槽底部表面较表面感应淬火硬度分别提高7%和34%，绝对磨损体积分别下降了13%和25%。实践证实，对轴端沟槽底部激光相变硬化处理方法较其他表面处理方法工艺简单，加工工件符合技术要求，试验结果对零件表面处理提供了可靠依据。