浅谈下一代网络（NGN）

计算机网络的发展日新月异。下一代计算机网络（NGN）的探讨、研究已经成为当前的潮流。下一代网络是目前电信、互联网运营商和设备厂商都在讨论的热点技术，国内外许多网络运营商都在探讨，并正在或考虑建设试验网进行更深入的研究。本文介绍了NGN的定义、主要特点、分层结构和关键技术。     

辽东含硼岩系条痕状角闪混合岩特征及其找矿意义

痕状角闪混合岩与其围岩变（浅）粒岩为渐变过渡关系.并呈现一些特殊的结构构造.其岩石化学成份变化波动性较大,说明岩石化学成分不稳定,与矿化含量的不稳定性一致.其特殊的岩石化学组成显示为混合岩特征.条痕状角闪混合岩石稀土总量ΣREE的平均值为207.18 ppm;（Ce/ΣY平均值为3.25;La/Yb为平均值为 6.48,δEu平均为 0.48,Eu/Sm平均值为0.16.这些特点与里尔峪组的各种变（浅）粒岩相似,是层状混合花岗岩.     

铁基气门导管材料性能的控制

介绍了在铁基气门导管的生产过程中,加强关键工序的质量管理,以确保产品材料性能的合格与稳定。     

Determination of the solubility parameter of poly(ethylene oxide) at 25°C by gas-liquid chromatography

The solubility parameter of poly(ethylene oxide) at 25°C has been determined using the method developed by DiPaola-Baranyi and Guillet, by the extrapolation of the values of the interaction parameter χ, at high temperatures, ranging from 70°–90°, 90°–110° and 110°–130°C down to 25°C. The values of the solubility parameter obtained, depending on the temperature ranges employed, are 9.8, 9.9 and 10.1, respectively.     

充油S-SBR加工行为的研究

在中试装置上合成相对分子质量分布较宽的充油S-SBR，考察不同环烷油和芳烃油填充量的充油S-SBR的流变性能和混炼行为。结果表明，增大油的填充量能提高充油S-SBR的流动性能，充芳烃油S-SBR相对于充环烷油的S-SBR对温度更敏感，宽相对分子质量分布的充环烷油S-SBR的混炼性能优于S-SBR1204及E-SBRl778，竟相对分子质量分布的充芳烃油S-SBR的混炼性能优于S-SBR1204，Solprene380和E-SBR1712。     

采用高性能搅拌设施生产适应市场的水泥

在欧洲和世界其它地区，CEMⅠ水泥(渡特兰水泥)日益为CEMⅡ水泥(有几个主要组份的渡特兰水泥)和CEMⅢ水泥(高炉矿渣水泥)所替代。为了满足生产具有特定粒径分布的高质量水泥的要求，现广为采用的不同水泥组分的混合粉磨工艺已经被单独粉磨然后再在高性能均化设施中进行均化的工艺所代替。依据情况不同，可以采用连续或间歇式搅拌机。文章描述了不同工艺技术．并介绍了最近的几个实例：     

碰撞式混合器的设计和使用

从反应注射成型过程对混合器的结构设计、操作条件等的要求出发，对碰撞式混合器的设计和使用应注意的问题进行了分析探讨，并提出了相应的解决办法和处理措施。     

国外挤出成型加工技术及设备的近期进展

简要评述了国外塑料挤出成型加工技术及设备的近期进展,重点介绍了混炼挤出技术及设备、反应挤出技术及设备以及共挤出成型及设备的发展动向,并列举了国外主要公司的技术成果.     

The use of a mixing-sensitive chemical reaction for the study of pulp fibre suspension mixing

The competitive, consecutive chemical reactions between 1-naphthol and diazotized sulfanilic acid were utilized to study the mixing of a pulp fibre suspension in a 22 L stirred tank reactor. Mixing quality was determined from the distribution between the mono and bis substituted reaction products once a correlation was made for the adsorption of the product dyes onto the suspended fibres. The technique was found to be adequate for assessing micromixing and turbulence intensity within a fibre suspension provided the measured product distribution, Xs, was between 0.4 and 0.01. Thus the mixing conditions that could be assessed depended on both the energy dissipation within the mixer and the amount of the fibre present. For the experimental conditions chosen for this study energy dissipation rates would typically have to be less than 80 W/kg and the suspension mass concentration less than 2.5%. When compared with water, a reduction in turbulence levels at both the impeller zone and a remote zone in the stirred vessel was observed for fibre mass concentrations as low as 0.5%. The turbulence decreased as the suspension mass concentration was increased. This decrease is attributed to energy dissipation by friction at fibre-fibre contact points as the fibres move relative to one another in the flow. This sink removes energy from the turbulence cascade which never shows up as small-scale fluid deformations leading to better mixing.     

球窝型动态混合器结构和机理的研究

介绍研制的题示混合器结构及其混合机理。在分析球窝流场各节点速度分布的基础上,用加权平均总应变和分流混合度作为评定指标,对球窝型混合器的混合行为进行分析。通过对比实验证明球窝型混合器对于高粘流体具有良好的混合功效。