工作危害分析法在蜡油催化裂化装置的应用

在催化裂化装置停工消缺的全过程中．全面应用工作危害分析法，细化每一项工作，分析潜在的危害，找出主要危害及其后果，制定控制措施，并抓好具体落实，确保检修工作的顺利进行。应用结果表明，装置各专业管理人员的共同参与，使分析结果充分全面，措施合理、可操作性强；删除了原表格中风险度一栏，使分析表的指导作用更强，也提高了应用水平；应用该方法，使管理、操作人员正确识别危害与风险，提高了管理与操作的水平。并找出存在的不足，提出了改进意见。     

Transduction of Brain Neurons in Juvenile Chum Salmon (Oncorhynchus keta) with Recombinant Adeno-Associated Hippocampal Virus Injected into the Cerebellum during Long-Term Monitoring

Corpus cerebelli in juvenile chum salmon is a multiprojective region of the brain connected via afferent and efferent projections with the higher regions of the brainstem and synencephalon, as well as with multiprojection regions of the medulla oblongata and spinal cord. During the postembryonic development of the cerebellum in chum salmon, Oncorhynchus keta, the lateral part of the juvenile cerebellum gives rise to the caudomedial part of the definitive cerebellum, which is consistent with the data reported for zebrafish and mouse cerebellum. Thus, the topographic organization of the cerebellum and its efferents are similar between fish (chum salmon and zebrafish) and mammals, including mice and humans. The distributions of recombinant adeno-associated viral vectors (rAAVs) after an injection of the base vector into the cerebellum have shown highly specific patterns of transgene expression in bipolar neurons in the latero-caudal lobe of the juvenile chum tectum opticum. The distribution of rAAVs in the dorsal thalamus, epithalamus, nucleus rotundus, and pretectal complex indicates the targeted distribution of the transgene via the thalamo-cerebellar projections. The detection of GFP expression in the cells of the epiphysis and posterior tubercle of juvenile chum salmon is associated with the transgene’s distribution and with the cerebrospinal fluid flow, the brain ventricles and its outer surface. The direct delivery of the rAAV into the central nervous system by intracerebroventricular administration allows it to spread widely in the brain. Thus, the presence of special projection areas in the juvenile chum salmon cerebellum, as well as outside it, and the identification of the transgene’s expression in them confirm the potential ability of rAAVs to distribute in both intracerebellar and afferent and efferent extracerebellar projections of the cerebellum.     

大型地震模拟振动台运行对周围场地影响的试验研究

为降低大型地震模拟振动台试验时所引起的振动对振动台实验室以及周边建筑结构内的机床以及精密仪器的影响,提高结构内人员的舒适度,建立了一种频率相关的半主动控制三维隔振楼板系统。提出了一种基于楼板输入加速度主频的on-off半主动控制方法以及相应的频率在线检测方法,开展了振动台试验,进行了正弦波与地震动引起振动的加载。试验结果表明：所提出的频率在线检测方法可以快速有效地检测输入振动波的主频,根据此频率进行的半主动控制可以有效降低楼板的振动响应。为了提高控制效果,实际应用中应尽量降低磁流变阻尼器在低阻尼力模式时的阻尼。     

Completion and stimulation trends in North American unconventional plays and resulting impact on well productivity

过去十年,非常规油气勘探开发在全球范围内大幅扩张。水平钻井和多级水力压裂技术也在不断地发展和创新,使得超长水平井成为可能。同时,因为压裂强度不断增加,作业者可以最大限度地提高储层接触面积和对储层的改造体积 （SRV）。然而,完井优化方面的挑战仍然存在,作业者持续不断地尝试和试验各种完井与增产参数组合,以确保非常规油气藏开发的经济可行性。优选最佳的完井与增产参数组合是一项非常关键的任务,应结合油气田的具体储层特征进行优化。本文总结了2014—2020年间北美9个主要非常规油气藏的压裂增产趋势,包括Marcellus, Haynesville, Barnett, Utica, Bone Spring, Bakken, Wolfcamp Midland, Eagle Ford, Scoop/Stack。分析了各油气田几个关键的完井和增产参数的整体趋势,同时还评估了单个参数（如水平段压裂长度、支撑剂强度、段间距等）对井产能的影响。然后对比分析相应的初始井产量（90 天平均初始产量）,评估各个参数对产能的影响,从而确定每个完井参数的最佳范围,以实现产能最优化。     

引风机内颗粒沉积的数值模拟

以重整化群k-ε 模型为基础,利用计算流体力学（computation fluid dynanics,CFD）对离心式引风机的内部流场进行数值模拟。采用拉格朗日颗粒轨道模型,得到固体颗粒在引风机内的运行轨迹;加入吹灰气流,通过数值模拟验证其减少颗粒沉积的可行性。     

饱水石灰岩骨架和流体弹性参数的估算

本文利用Niu等提出的基于临界孔隙度模型的组分弹性参数数值计算方法,把测试岩石样品的孔隙度、整体密度、纵波速度和横波速度作为数值计算的输入数据,运用双线性数值计算方法反演求出临界点、流体和骨架的12个弹性参数。具体做法是:基于临界孔隙度模型,给出三组线性关系,即密度—孔隙度,整体剪切模量—孔隙度,整体纵波模量—孔隙度,上述每组线性关系分别以孔隙度作为自变量和因变量得到两个线性方程,再把两个方程计算的结果进行加权平均得到相关的弹性参数估算值,并结合饱水石灰岩样品数据实现了弹性参数估算。数值计算结果表明,由数值计算得到的弹性参数与测试弹性参数的均值和方差相差甚微,特别是密度数据的偏差均值更小,说明文中的数值计算结果是可靠的。     

金属切削液在轴承加工中的应用

着重介绍金属切削液的分类、功能及其在轴承加工中的选用。在轴承加工中,一般有车削、铣削、钻削、铰削和磨削等多种加工工艺,其中磨削加工是一道非常重要的精密加工工序,如内圆磨削、外圆磨削、平面磨削和沟槽磨削等。轴承加工中使用的水基切削液不仅要具有冷却作用,还要有润滑、清洗和防锈的功能。重点介绍金属切削液的主要功能及其在轴承加工中的应用。     

《固定式压力容器安全技术监察规程》中压力容器类别的划分

TSG R0004—2009《固定式压力容器安全技术监察规程》中压力容器类别划分按设计压力、容积和介质危害性三个因素确定,不再考虑容器在生产过程中的作用、材料强度等级、结构形式等因素。根据危险程度的不同,仍然划分为Ⅰ类、Ⅱ类、Ⅲ类,在不同介质分组坐标图上查取相应的类别,简单易行、科学合理、准确唯一。并将介质分为两组,一组为危险性介质;另一组为非危险性介质。按介质组别分类图确定压力容器类别,将分类图分区域可以迅速确定压力容器类别根据强化危险性原则,突出本质安全思想,笔者认为对第二组介质的类别划分有些部分不太合理,根据目前的划分方法,某些压力容器的容积相差1 L或压力相差0.01 MPa,可压力容器类别却从Ⅲ类压力容器变成了Ⅰ类压力容器,建议将这范围内的类别划分从Ⅰ类压力容器改为Ⅱ类压力容器。     

Experimental study on high viscosity fluid micro-droplet jetting system

Fluid dispensing is a method by which fluid materials(such as epoxy,adhesive,and encapsulant) are delivered in a controlled manner in electronics packaging.Fluid jetting,derived from inkjet technology,is a noncontact,data-driven fluid dispensing technology.But ideal fluid materials for packaging are usually high viscous,which is difficult to realize by traditional inkjet technology.In this paper,a mechanical micro-droplet jetting system for high viscosity fluid was proposed.It consists of dispensing valve,m...     

Mixing characterisation of full-scale membrane bioreactors: CFD modelling with experimental validation

Membrane Bioreactors (MBRs) have been successfully used in aerobic biological wastewater treatment to solve the perennial problem of effective solids-liquid separation. The optimisation of MBRs requires knowledge of the membrane fouling, biokinetics and mixing. However, research has mainly concentrated on the fouling and biokinetics (Ng and Kim, 2007). Current methods of design for a desired flow regime within MBRs are largely based on assumptions (e.g. complete mixing of tanks) and empirical techniques (e.g. specific mixing energy). However, it is difficult to predict how sludge rheology and vessel design in full-scale installations affects hydrodynamics, hence overall performance. Computational Fluid Dynamics (CFD) provides a method for prediction of how vessel features and mixing energy usage affect the hydrodynamics. In this study, a CFD model was developed which accounts for aeration, sludge rheology and geometry (i.e. bioreactor and membrane module). This MBR CFD model was then applied to two full-scale MBRs and was successfully validated against experimental results. The effect of sludge settling and rheology was found to have a minimal impact on the bulk mixing (i.e. the residence time distribution).