Porous Polymersomes with Encapsulated Gd‐Labeled Dendrimers as Highly Efficient MRI Contrast Agents

The use of nanovesicles with encapsulated Gd as magnetic resonance (MR) contrast agents has largely been ignored due to the detrimental effects of the slow water exchange rate through the vesicle bilayer on the relaxivity of encapsulated Gd. Here, the facile synthesis of a composite MR contrast platform is described; it consists of dendrimer conjugates encapsulated in porous polymersomes. These nanoparticles exhibit improved permeability to water flux and a large capacity to store chelated Gd within the aqueous lumen, resulting in enhanced longitudinal relaxivity. The porous polymersomes, ～130 nm in diameter, are produced through the aqueous assembly of the polymers, polyethylene oxide‐b‐polybutadiene (PBdEO), and polyethylene oxide‐b‐polycaprolactone (PEOCL). Subsequent hydrolysis of the caprolactone (CL) block resulted in a highly permeable outer membrane. To prevent the leakage of small Gd‐chelate through the pores, Gd was conjugated to polyamidoamine (PAMAM) dendrimers via diethylenetriaminepentaacetic acid dianhydride (DTPA dianhydride) prior to encapsulation. As a result of the slower rotational correlation time of Gd‐labeled dendrimers, the porous outer membrane of the nanovesicle, and the high Gd payload, these functional nanoparticles are found to exhibit a relaxivity (R1) of 292 109 mM ^?1 s^?1 per particle. The polymersomes are also found to exhibit unique pharmacokinetics with a circulation half‐life of >3.5 h and predominantly renal clearance.     

Electromodulation and magnetomodulation of exciton dissociation in electron donor (starburst amine) : electron acceptor (bathocuproine) system

Electric field dependencies of electromodulated photoluminescence and photocurrents as well as the magnetic field effects on photocurrents, photovoltaic characteristics, electromodulated photoluminescence and photoluminescence have been investigated in vacuum evaporated films of m-MTDATA:BCP (4,4′,4″-tris(N-(3-methylphenyl)-N-phenylamino)triphenylamine and bathocuproine) system. The electromodulation processes do remain in accordance with Onsager as well as with the Sano–Tachiya–Noolandi–Hong formalisms of electron–hole pair separation. While the electromodulated photocurrents are due to operation of both long-radius and short-radius e–h pairs, the electromodulated photoluminescence quenching is related to merely short-radius fraction of the e–h pairs involved in the exciplex creation process. The photocurrents, photovoltaic characteristics, photoluminescence and electromodulated photoluminescence are influenced by external magnetic field of the hyperfine coupling (HFC) scale which modulates the singlet–triplet intersystem crossing of long-radius e–h pairs.     

Characterization of LSMO/C60 spinterface by first-principle calculations

Spinterface between fullerene C₆₀ and La_{0 7}Sr_{0 3}MnO₃ (LSMO) was studied by means of density functional theory. Co-existence of many different configurations was shown, and probabilities of their appearance were estimated. Dependence of composite properties on configuration and temperature was also investigated. Key role of transition metal atoms in both binding between composite compartments and magnetic ordering in C₆₀ molecule was discussed. The latter was suggested to be responsible for spin-polarized charge transport while overall magnetic moment of fullerene molecule is relatively small.     

Techniques and Apparatus for Measuring Rotational Core Losses of Soft Magnetic Materials

In many situations such as the cores of a rotating electrical machine and the T joints of a multiphase transformer, the local flux density varies with time in terms of both magnitude and direction, i.e. the flux density vector is rotating. Therefore, the magnetic properties of the core materials under the rotating flux density vector excitation should be properly measured, modeled and applied in the design and analysis of these electromagnetic devices. This paper presents an extensive review on the development of techniques and apparatus for measuring the rotational core losses of soft magnetic materials based on the experiences of various researchers in the last hundred years.     

Multifunctional Magnetic Optical Sensor Particles with Tunable Sizes for Monitoring Metabolic Parameters and as a Basis for Nanotherapeutics

Magnetic optical sensor particles with multifunctional cores and shells are synthesized via a facile nanoprecipitation method and the subsequent modification of the particle shell. The hydrophobic particle core includes optical oxygen indicators, a light harvesting system, photosensitizers, and magnetic nanoparticles. Further functionalities are introduced by modifying the shell with enzymes, antibodies, multiple layers of polyelectrolytes, stimuli‐responsive polymers, and luminescent indicator dyes. The hydrodynamic diameter is tunable by varying different precipitation parameters.     

基于集成技术的二维智能焊缝传感器

本文简述了基于GMR的二维焊缝检测传感器.为解决焊接加工自动化过程中焊缝的跟踪检测,将GMR焊枪悬浮高度传感器、焊缝检测传感器以及相应的微处理器有机集成,从而使传感器实现小型化智能化,减少对工件检测的死区范围.该传感器与自动焊接机组成的焊缝跟踪系统,焊缝跟踪精度高、响应速度块,减少了焊缝轨迹空间捕捉算法的复杂性.     

Facile Fabrication and Superparamagnetism of Silica‐Shielded Magnetite Nanoparticles on Carbon Nitride Nanotubes

Using conventional methods to synthesize magnetic nanoparticles (NPs) with uniform size is a challenging task. Moreover, the degradation of magnetic NPs is an obstacle to practical applications. The fabrication of silica‐shielded magnetite NPs on carbon nitride nanotubes (CNNTs) provides a possible route to overcome these problems. While the nitrogen atoms of CNNTs provide selective nucleation sites for NPs of a particular size, the silica layer protects the NPs from oxidation. The morphology and crystal structure of NP–CNNT hybrid material is investigated by transmission electron microscopy (TEM) and X‐ray diffraction. In addition, the atomic nature of the N atoms in the NP–CNNT system is studied by near‐edge X‐ray absorption fine structure spectroscopy (nitrogen K‐edge) and calculations of the partial density of states based on first principles. The structure of the silica‐shielded NP–CNNT system is analyzed by TEM and energy dispersive X‐ray spectroscopy mapping, and their magnetism is measured by vibrating sample and superconducting quantum interference device magnetometers. The silica shielding helps maintain the superparamagnetism of the NPs; without the silica layer, the magnetic properties of NP–CNNT materials significantly degrade over time.     

Novel magnetic field sensor based on magnetic fluids infiltrated dual-core photonic crystal fibers

Novel magnetic field sensor based on magnetic fluids infiltrated dual-core Photonic Crystal Fibers (PCFs) is proposed in this paper. Inside the cross-section of the designed PCFs, the two fiber cores filled with magnetic fluids (Fe₃O₄) are separated by an air hole, and then form two independent waveguides with mode coupling. The mode coupling under different magnetic field strength is investigated theoretically. A novel and simple magnetic field sensing system is proposed and its sensing performances have been studied numerically. The results show that the magnetic field sensor with 15-cm PCFs has a large sensing range and high sensitivity of 4.80 pm/Oe. It provides a new feasible method to design PCF-based magnetic field sensor.     

Tuning optical,electrical and magnetic properties of fiber structured ZnO film by deposition temperature and precursor concentration

Highly transparent ZnO films were deposited on glass substrates using zinc acetate solution through cost effective spray pyrolysis method. A comprehensive study was carried out to understand the effects of deposition temperature and precursor concentrations on structure, surface morphology, optical, electrical and magnetic properties of the deposited films. All deposited films were polycrystalline in nature with hexagonal wurtzite structure. The films were preferentially oriented along (1 0 1) plane up to 723 K beyond which orientation changed to (0 0 2) plane. Irrespective of precursor concentration used, the films deposited at 673 K and 723 K showed fibrous structure. The films deposited at higher temperature led to enhanced transmittance and optical energy band gap. With higher precursor concentrations the transmittance decreased while the band gap increased. Photoluminescence studies revealed the presence of various defects leading to emission in the visible region apart from band to band transition near UV region. Lowest electrical resistivity was obtained for films deposited at 723 K which is of the order 10² Ω cm. At room temperature, all deposited films were diamagnetic while they were paramagnetic at 5 K.     

Introducing immobilized metal phthalocyanines as spin-injection and detection layers in organic spin-valves: Spin-tunneling and spin-transport regimes

In (organic) spin-valve devices, two ferromagnetic electrodes having different coercive fields are used to achieve an anti-parallel configuration necessary to enforce spin-flip of electrons within the semiconductor spacer layer. Here we report a use of immobilized magnetic organic molecules as spin-injection and spin-detection layers to form pre-fabricated spin-valve devices. While immobilized manganese- and nickel-phthalocyanines were used as spin-injection and spin-detection layers both, copper phthalocyanine acted as the spacer layer in the all-organic spin-valve devices.In the current-voltage characteristics of parallel and anti-parallel configurations, the electrical resistance was always higher for the latter one implying positive magnetoresistance in the material. By lowering thickness of the spacer layer down to a monolayer region, a tunneling regime could be achieved; spin-flip process in organic spin-valves has been found to be facile in the tunneling regime as compared to that during the spin-transport process through a thicker spacer layer.