Microwave permeability of single cobalt nanotube studied by micromagnetics simulations and generalized Snoek’s law

Microwave permeability spectra of single Co nanotube under equilibrium state have been studied by micromagnetics simulation.More than four obvious resonance peaks have been found(11.72,24.20,33.18 and 39.55 GHz).Such large resonance frequency cannot be found in other traditional magnetic materials.The configurations of magnetic moments along the nanotube have been simulated.The results show that the top end of nanotube has a"flow-out"pattern of magnetic moments configuration.The bottom end has a"flow-in"pattern of magnetic moments configuration.The magnetic moments within the main body of nanotube are aligned perfectly along the length of nanotube.The magnitude of natural resonance peak is strongly related to the volume fraction of a zone,which has the same orientation of magnetic moments.Large microwave permeability values have been found for single nanotube.The generalized Snoek’s law has been used to validate the micromagnetics simulations in this paper.     

载流导体的二维温度场的分析

为分析机电设备导体中电流引起的热分布问题,建立了机电设备的简化有限元模型,对导体进行了自适应网格划分,采用有限元方法求解热导微分方程,得到导体中热分布情况,可以估算导体的形状和尺寸,为机电设备选择合适的导体提供了一种有效的设计方法。     

提高立体仓库自动化水平的Flexsim仿真

以自动化立体仓库的现有设备为基础,提出一些可以提高立体仓库自动化水平的优化措施,在满足正常生产需求的条件下达到了减少仓储储位10%的核心目标.Flexsim仿真模型的运行结果表明:采用优化措施之后比当前运作情况下的单体包仓库最大利用率提高12.36%,多体包仓库平均利用率提高5.32%,整板仓库平均利用率提高1.27%,且工厂对安全存货的需求不受影响.     

声纹识别系统设计

论述了声纹识别的相关概念、应用领域及其区别于其他身份认证的优势,从软件方面构建了一个基于Matlab的声纹识别系统,并对整个系统进行了仿真实验,实验结果表明该系统具有较高的识别率,可应用于有限人群的身份认证。     

基于模糊控制的微型燃机燃料压力控制

针对微型燃气轮机在控制时由于压力不恒定而导致的运行效率低的问题,将模糊PID控制思想运用到控制系统。在传统的PID控制下加入模糊控制,使其PID参数具有在线自整定功能。仿真结果表明,该方法能够很好地提高压力控制效果。     

铁磁材料磁滞回线的Matlab分析方法设计

铁磁材料的磁特性常用磁滞回线来描述,而剩磁及矫顽力是铁磁材料磁滞回线上的重要参数。就如何使用M atlab来处理磁滞回线的数据给出了处理方法,并予以验证,结果表明所设计的方法处理结果精度高,拟合效果良好,并有较强的程序通用性。     

Interplay Between Wetting and Phase Behavior in Binary Polymer Films and Wedges: Monte Carlo Simulations and Mean Field Calculations

Confining a binary mixture, one can profoundly alter its miscibility behavior. The qualitative features of miscibility in confined geometry are ratheruniversal and shared by polymer mixtures as well as small molecules, but the unmixing transition in the bulk and the wetting transition are typically well separated in polymer blends. The interplay between wetting and miscibility of a symmetric polymer mixture via large-scale Monte Carlo simulations in the framework of the bond fluctuation model and via numerical self–consistent field calculations is studied. The film surfaces interact with the monomers via short ranged potentials, and the wetting transition of the semi–infinite system is of first order. It can be accurately located in the simulations by measuring the surface and interface tensions and using Young’s equation. If both surfaces in a film attract the same component, capillary condensation occurs and the critical point is close to the critical point of the bulk. If surfaces attract different components, an interface localization/delocalization occurs which gives rise to phase diagrams with two critical points in the vicinity of the pre-wetting critical point of the semi–infinite system. The crossover between these two types of phase diagrams as a function of the surface field asymmetry is studied. The dependence of the phase diagram on the film thickness Δ for antisymmetric surface fields is investigated. Upon decreasing the film thickness, the two critical points approach the symmetry axis of the phase diagram, and below a certain thickness Δ_tri, there remains only a single critical point at the symmetric composition. This corresponds to a second-order interface localization/delocalization transition even though the wetting transition is of first order. At a specific film thickness, Δ_tri, tricritical behavior is found. The behavior of antisymmetric films is compared with the phase behavior in an antisymmetric double wedge. While the former is the analog of the wetting transition of a planar surface, the latter is related to the filling behavior of a single wedge. Evidence for a second-order interface localization/delocalization transition in an antisymmetric double wedge is presented, and its unconventional critical behavior is related to the predictions of Parry et al. (Phys. Rev. Lett. 83:5535 (1999)) for wedge filling. The critical behavior differs from the Ising universality class and is characterized by strong anisotropic fluctuations.Invited paper presented at the Fifteenth Symposium on Thermophysical Properties, June 022–27, 2003, Boulder, Colorado, U.S.A.     

基于GIS的供水管网水力计算模型

供水管网是将水从单一或多个水源地输送到用户的管线网络。文中就基于地理信息系统(Geographic InformationSystem,GIS)的供水管网水力计算模型的有关概念、建模方法、理论、实现等问题做了阐述,它将使管网工况分析工作从繁琐耗时变的简单快捷。