A probabilistic simulator for population dynamics of quasispecies

We constructed a probabilistic simulator that allows all the events in population dynamics such as death, birth, mutation, and suppression/stimulation to be described by probabilistic rules. The simulator also facilitates a lattice used for expressing distribution and diversity (number of distinct strains) of quasispecies. The simulator is used to investigate the diversity threshold in HIV and T-cell interaction. This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008     

电磁搅拌制备ZL12Y铝合金流变半固态浆料的实验及模拟研究

对不同温度及不同搅拌工艺下得到的材料的显微组织的比较，确定了合理的半固态温度和搅拌工艺，即半固态温度为590℃，震荡电流为500A。随后对单个线圈电磁搅拌过程进行建模及电磁场和流速场的耦合模拟得到了电磁场和流速场分布，此结果与电磁搅拌的原理及实验结果相一致。计算出在该温度和工艺下熔体内部的平均流动速度为3．2cm／s，将该结果作为能否得到半固态浆料的判据。     

Modeling dynamic developable meshes by the Hamilton principle

In this paper, a new dynamic developable surface model is proposed. The proposed model represents developable surfaces using triangle meshes. A novel algorithm is proposed to introduce the Hamilton principle into these meshes such that the resulting developable model is dynamic, i.e., it can offer a time-dependent continuous path to deform the model. Applications with examples are presented; these show that the proposed technique can model buckled developable surfaces well, and can offer physically-realistic animations of deformed developable surfaces.     

Pulsating Jet Impingement Heat Transfer Enhancement

This article presents results from a numerical study of pulsating jet impingement heat transfer. The motivation is to seek conditions offering a significant enhancement compared to steady flow impingement drying. The CFD software package FLUENT was used for simulating slot-type pulsating jet impingement flows with confinement. The parameter study included velocity amplitude ratio, mean jet velocity, and pulsation frequency. The distance from nozzle exit to surface was three times the hydraulic diameter of the nozzle. The Reynolds number based on the nozzle hydraulic diameter and jet temperature was 2,460 with a mean jet velocity of 30 m/s, which is the base case of the numerical experiments. Results showed that time-averaged surface heat transfer increased with increasing velocity amplitude for the same mean jet velocity. Large velocity amplitudes helped enhance heat transfer by two mechanisms: high jet velocity during the positive cycle and strong recirculating flows during the negative cycle. For the cases with different mean jet velocities but the same maximum velocity, time-averaged surface heat flux decreased with decreasing mean jet velocity. As for the effects of pulsation frequency, with high-velocity amplitude ratio, time-averaged surface heat fluxes were at the same level regardless of frequency. However, at low-velocity amplitude ratio, high frequency caused stronger recirculating flows resulting in greater heat transfer compared to the cases with a lower frequency.     

火灾中受保护钢构件的温度数值计算

利用传热学原理，考虑保护层表面热阻和保护层厚度内温度的非线性变化，建立受保护钢构件在火灾条件下瞬态导热微分方程，并计算其截面温度。     

基于Matlab语言的液压特性曲线的绘制

Matlab语言强大的运算、仿真能力，被广泛用在液压控制系统中。利用Matlab语言可以进行液压特性曲线的绘制，液压控制系统稳定性的检测，也可以进行液压控制系统的仿真。这里以两个实例，即单、双喷嘴挡板阀压力流量特性曲线的绘制，以及液压转矩放大器系统稳定性的检测，来说明它的强大的功能。     

基于Matlab的教学型机器人空间运动轨迹仿真

根据教学型机器人的实际结构特点，利用Matlab中SimMechanics工具箱建立了运动学仿真模型。并进行机器人关节空间和直角坐标系下的运动仿真。仿真结果表明利用仿真模型可以准确、有效地得到机器人的运动参数和运动轨迹，为机器人分析设计提供了可靠依据。     

三探测器密度测井数据处理方法研究

数据处理方法研究是三探测器岩性密度测井研究的一个重要方面。在Monte Carlo模拟的基础上，提出了2种三探测器岩性密度测井求取地层光电吸收指数Pe和进行泥饼校正求取地层密度ρb的方法；就三探测器岩性密度测井仪DTLD—2的围岩补偿功能进行了研究。结果显示了用计算机模拟方法研究核测井问题可以节省建造实体物理模型的费用和人力，具有广泛的应用前景。     

Modern Teaching and Training in Metallurgical Engineering

This contribution deals with advanced educational technologies needed to equip customers from higher education institutions, research and industry with efficient tools supporting their work and operating new skills‐training methods. The challenges are reducing the training costs, improving quality and increasing the number of graduates in engineering departments. The concept of a Virtual Lab based on the combination of various teaching methods and tools is presented. Principles of mathematisation in metallurgical education and training are discussed. An example of online course designed in the form of Virtual Lab is demonstrated.     

有限元仿真分析中的结构周期差异探讨

针对有限元仿真分析中结构自振周期减小的问题，讨论了几种主要的影响因素，并借用商品化设计软件TBSA，ETABS 和有限元分析软件ANSYS，通过对一个简单结构的多次计算，比较了这些因素的影响大小。